On Wed, May 02, 2012 at 11:18:54AM -0500, Stephen J Alexander wrote:
Hello all,
I'm trying to solve a problem on a T1 span setup wherein calls are
apparently not hanging up properly.
CAS or PRI?
The system in question is using a Xorcom Astribank with 1 full and 1
partial T1 span, and
Tzafrir,
Thanks for your response. I'll check into those items.
Regards,
Stephen J Alexander
MPBX, LLC
http://mpbx.com
832-713-6729
On Thu, May 3, 2012 at 4:39 AM, Tzafrir Cohen tzafrir.co...@xorcom.comwrote:
On Wed, May 02, 2012 at 11:18:54AM -0500, Stephen J Alexander wrote:
Hello all,
Hello all,
I'm trying to solve a problem on a T1 span setup wherein calls are
apparently not hanging up properly.
The system in question is using a Xorcom Astribank with 1 full and 1
partial T1 span, and running Asterisk 1.4.36.
The symptom is that when a call hangs up on a DAHDI channel
Hi all,
I have asterisk connected to my voice application server.
Asterisk is connected and registering to a linksys spa400 box.
I am running an application on a perticular extention (141).
Here is a snip from my extensions.conf...
exten = spa400,s,MyApp(/etc/asterisk/MyAppConfig.conf)
exten
hi all
I am using asterisk 1.4.15 I have a problem in conference .The conference
room is not getting hangup after disconnecting tha call also.It shows
disconnection on the x lite phone but when i run show channels on asterisk
cli it showr meetme room is reserved.
thanks
Rahul
Hi,
sipphone -- Asterisk PBX -- PSTN -- Cell Phone
sipphone sets up a call to Cell Phone. When Cell Phone hangs up,
it takes about 1 minute for Asterisk to show the Hangup Zap 1/1 message,
after which sipphone hangs up. During the time before Asterisk shows the Hangup
message, Busy Tone can be
From the list I read ..
Connecting Asterisk with Digium FXO interface card with any EPABX
will have hangup issue.
Ie: hangup from EPABX extn will not be recognised by Asterisk.
I am facing this problem with TDM FXO interface cards.
Is there any work aroud for this .Like if the User
i have a box running debian sarge with asterisk installed from distribution
packages:
CLI show version
Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k built by [EMAIL PROTECTED] on a x86_64
running Linux
I have managed to configure a simple dialplan (the PBX task is quite simple as
this is a small
On Thu, Sep 08, 2005 at 02:56:28PM +0200, Marek Zachara wrote:
i have a box running debian sarge with asterisk installed from distribution
packages:
CLI show version
Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k built by [EMAIL PROTECTED] on a x86_64
running Linux
I have managed to configure a
I am trying to integrate asterisk with a 3rd party PBX for voicemail
(Mitel). For the most part, things are working well. We only have one
main issue left: hangup detection. The connection between the two is:
* w/T100P - Zhone channel Bank FXO port - Mitel ONS (station) port
(Yes, overkill, but
10 matches
Mail list logo