Hello!
On Wed, 31 Mar 2004, Steve Underwood wrote:
> I haven't tried with a recent Compaq, but a couple of years ago the hot
> plug slots were a joke. It was nearly impossible to swap a card without
> disturbing the others in the chassis, and crashing the server. The cards
Did you mean Compaq
On Mar 31, 2004, at 6:42 AM, Steve Underwood wrote:
Scott Laird wrote:
You can buy systems with hot-plugable standard PCI slots. Many
higher-end servers have included the ability for years.
Example:
http://h18004.www1.hp.com/products/servers/proliantml530/index.html
If you read down far enoug
März 2004 16:42
An: [EMAIL PROTECTED]
Betreff: Re: [Asterisk-Users] Hot plug PCI?
Scott Laird wrote:
>
> On Mar 31, 2004, at 12:01 AM, Nicolas Bougues wrote:
>
>> - hardware : you must have hotplug capable boards and bus. I believe
>> the only option there is CompactPCI, and
Scott Laird wrote:
On Mar 31, 2004, at 12:01 AM, Nicolas Bougues wrote:
- hardware : you must have hotplug capable boards and bus. I believe
the only option there is CompactPCI, and of course cPCI boards and
chassis are very different from your day-to-day PCI stuff. Of course
Digium boards,
On Mar 31, 2004, at 12:01 AM, Nicolas Bougues wrote:
- hardware : you must have hotplug capable boards and bus. I believe
the only option there is CompactPCI, and of course cPCI boards and
chassis are very different from your day-to-day PCI stuff. Of course
Digium boards, as well as any other
On Tue, Mar 30, 2004 at 10:27:28AM -0600, Charlie Hedlin wrote:
> The quick question: Do the digium drivers for the Digium Wildcard TE410P
> (4 port T1/E1/PRI 3.3v card) , the T100P (single port T1), and the
> TDM400P support hot plug PCI? I am also noting that while the TDM400P
> doesn't stat
The quick question: Do the digium drivers for the Digium Wildcard TE410P
(4 port T1/E1/PRI 3.3v card) , the T100P (single port T1), and the
TDM400P support hot plug PCI? I am also noting that while the TDM400P
doesn't state the voltage requirements, it looks like a 5v card. I hope
that I am
