On 2 Jun 2003 at 14:35, Brancaleoni Matteo wrote:
Little summary what the status is:
1. isdn4linux for real calls not just IVR forget it
2. capi4linux only works with cards active AND passive which do support capi
at the moment those are eicon diva and cards from AVM
The only passive card at the
Hallo Klaus-Peter,
i am currently working on a zaptel BRI driver which will support the
very nice (also nicely priced) hfc-pci based cards and the multiBRI
cards. the driver will support TE and NT mode.
Any timeplan?
I'm considering buying a diva server card with echo cancellation but I'd
There has been a lot of discussion about ISDN BRI on the list - a search
will turn up plenty of discussion!
You're right about there being a lot of ISDN cards available that are
certified for use in Europe. They fall into two categories - active and
passive. Passive cards are cheap and
On Mon, Jun 02, 2003 at 12:33:06AM +0200, Piotr Adamiak wrote:
Hello,
Anyone on this group using / implementing * and hardware certified for
use in Europe ? I believe that ISDN4Linux cards mostly have telecomm
certificates, so using them should be safe on the client side. Are there
any
My Fritz paasive PCI hasn't crashed so far and works fine, relatively
low latency so not too much echo. However for professional use, get an
active CAPI card so you can use the CAPI echo supp. routines.
Michiel
Oliver Brandt said:
On Mon, Jun 02, 2003 at 12:33:06AM +0200, Piotr Adamiak
Remember that capi 2.0 doesn't have echo suppressor routines.
Only Eicon Diva server cards have on board DSPs, that can
be enabled with Eicon custon CAPI commands.
(the great * chan_capi already do that).
Matteo.
Il lun, 2003-06-02 alle 12:39, Michiel Betel ha scritto:
My Fritz paasive PCI