I'm still not getting my outbound to work. I've seen two patches
relevant to broadvoice for chan_sip.c which apparently have already been
added to CVS. I'm dropping all outgoing calls after ~30 secs. Asterisk
doesn't seem to know they're gone though. I called my cell w/
broadvoice and turned on
Rich thanks, this makes it a little clearer. My servers are using NAT
behind a Cisco PIX. I only needed the simple patch (see below).
I configured sip.conf from these instructions:
http://www.voip-info.org/wiki-Asterisk+settings+Broadvoice
Hope this helps somebody. Sorry I wasn't clear about us
A lot of the BV config confusion is the result of users with registered
IP's vs nat'ed IPs. The patch _was_ only required for those that used
nat'ed systems (proven shortly after that patch was released, and backed
by those that wrote the patch).
So, for those that are still mucking around with BV
Thanks John, but I tried adding those and many others. Turned out that
I needed to install a patch even though I tried CVS-3/11/05 and
CVS-3/17/05 code. I'm not sure what release needs what patch to work
but I definitely needed a patch. Thanks to the person on this list who
sent it along. There
John / Brian,
huh, I'm still trying to understand what makes * not authenticate an
INVITE challenge for some people... in my config I do not have
dtmf=inband (only dtmfmode=inband) and no user=phone. Works just fine.
The insecure=very is essential but you can also limit it a bit with
permit=147.13
Brian,
You will need to add the following to your broadvoice peer:
user=phone
insecure=very
dtmf=inband
For more info check out:
http://geekgazette.com/index.php?option=com_content&task=view&id=20&Itemid=26
Hope this helps. -john
Brian G wrote:
I have tried everything to get BV working outbound. A
I have tried everything to get BV working outbound. All worked fine
until the BV change last week. I called BV and they changed me to sip
gen with a new password. I stripped my Asterisk server to one phone on
Zap/1 until I get this working. The same BV account works fine with a
SPA-3000 so I do
