Thanks to Dave Cotton, Adam Goryachev, Bob Goddard, Doug Lytle and Craig
Guy for their help on this, I think I am going to revert to Mandrake 9.2
and try the CAPI route again - my annual leave is running out!
Ray
___
Asterisk-Users mailing list
Asterisk
; Goryachev
> Sent: 25 February 2005 06:37
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [Asterisk-Users] Mandrake & CAPI & EPIA!
>
>
> I would suggest you cut your losses and start with a new kernel
>
> While you can cheat and pret
: RE: [Asterisk-Users] Mandrake & CAPI & EPIA!
I would suggest you cut your losses and start with a new kernel
While you can cheat and pretend that the source you have is the same as
what you used to compile your kernel, in the end, it isn't, so I doubt
it will work properly any
I would suggest you cut your losses and start with a new kernel
While you can cheat and pretend that the source you have is the same as
what you used to compile your kernel, in the end, it isn't, so I doubt
it will work properly anyway!
Just my 0.02c worth.
Regards,
Adam
On Thu, 2005-02-24
L PROTECTED] On Behalf Of Razza
Sent: 24 February 2005 08:41
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Mandrake & CAPI & EPIA!
I tried to force the modules (man insmod = modprobe -f in Mandrake
land?) and zaptel looked good, unfortuna
st - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Mandrake & CAPI & EPIA!
On Wed, 2005-02-23 at 22:21 +, Razza wrote:
> Bob,
> To be honest I don't mind who helps, but thanks so far to yourself,
> Doug
Well, I'll just jump in then :)
> I'm still c
On Wed, 2005-02-23 at 22:21 +, Razza wrote:
> Bob,
> To be honest I don't mind who helps, but thanks so far to yourself, Doug
Well, I'll just jump in then :)
> I'm still concerned that the the /var/log/kernel/errors file states -
> Feb 23 17:08:14 asterisk kernel: zaptel: version magic '2.6.8
Razza wrote:
I have added 66-zaptel.rules file as you suggested...do I not need
to ref this in a conf file or does udev simply look for any '*.rules'
file in /etc/udev/rules.d/ ?
That would be correct, udev will look for them there.
Which to me whould show some form of mismatch, or is this
On Wednesday 23 February 2005 22:21, Razza wrote:
[...]
> I'm still concerned that the the /var/log/kernel/errors file states -
> Feb 23 17:08:14 asterisk kernel: zaptel: version magic '2.6.8.1-12mdk
> 686 gcc-3.4' should be '2.6.8.1-12mdk-i586-up-1GB 586 gcc-3.4'
>
> And when I run 'cat /proc/vers
Bob,
To be honest I don't mind who helps, but thanks so far to yourself, Doug
Lytle and Craig Guy. This started off as simply trying to enable CAPI
(Fritz card) on my Mandrake 9.2 pbx which was working perfectly and has
morphed into Mandrake 10.1 with mISDN which is still not working on FXO
let alo
On Wednesday 23 February 2005 19:14, Razza wrote:
> i686 processor class and I know it's the CMOV function that's the issue,
> but I still can't get zaptel drivers to work! Are you saying I need to
> reinstall GCC telling it the processor is an i586 to avoid the issue?
Since you never quoted any
i686 processor class and I know it's the CMOV function that's the issue,
but I still can't get zaptel drivers to work! Are you saying I need to
reinstall GCC telling it the processor is an i586 to avoid the issue?
Further to my last note, I have done some digging and the
/var/log/kernel/errors fi
On Wednesday 23 February 2005 15:10, Razza wrote:
> Looked at the mISDN bits and pieces, which looked promising, so decided
> to take the plung and go for Mandrake 10.1 (Kernel 2.6.8.1) and well -
> What a disaster!
>
> I should probably have mentioned I am using an EPIA 5000/classic
> motherboard,
Razza wrote:
When I run 'cat /proc/version' I get the following -
Linux version 2.6.8.1-12mdk-i586-up-1GB ([EMAIL PROTECTED])
(gcc version 3.4.1 (Mandrakelinux (Alpha 3.4.1-3mdk)) #1 Fri Oct 1
12:36:44 CEST 2004
I'm running 2.6.8.1-12, but not the 1GB version under an AMD XP 1800+
The redame.u
being sarcastic! Am I expected to remove all
the previous items below in the name of peace and harmony?
Ray
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Doug Lytle
Sent: 23 February 2005 15:44
To: Asterisk Users Mailing List - Non-Commercial Discussi
Razza wrote:
Trying the get back to position of a running * PBX, I tried to install
the zaptel drivers, using the following process -
CD zaptel.
Make linux26
Make install
When I modprobe zaptel I get the following errors -
[EMAIL PROTECTED] zaptel-1.0.4]# modprobe zaptel
FATAL: Error inserti
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Craig Guy
Sent: 22 February 2005 03:14
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Mandrake & CAPI
I've been using FC2 with Kernel 2.6.9, the hardest thi
ECTED]>
To: "'Asterisk Users Mailing List - Non-Commercial Discussion'"
Sent: Tuesday, February 22, 2005 3:02 AM
Subject: RE: [Asterisk-Users] Mandrake & CAPI
> I was looking at the exercise as a bit of Linux lerning for myself, so I
> guess Mandrake 10.1 and mISDN? Does
Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Mandrake & CAPI
Or you could go to a 2.6 kernel and use the mISDN drivers.
Craig
- Original Message -
From: "Razza" <[EMAIL PROTECTED]>
To:
Sent: Sunday, February 20, 2005 8:00 PM
Subject: [Asterisk-Us
Or you could go to a 2.6 kernel and use the mISDN drivers.
Craig
- Original Message -
From: "Razza" <[EMAIL PROTECTED]>
To:
Sent: Sunday, February 20, 2005 8:00 PM
Subject: [Asterisk-Users] Mandrake & CAPI
> All,
> I have been trying to get CAPI4Linux worki
Title: Message
All,I have been trying to get CAPI4Linux
working on my machine and being frank am failing miserably! I am looking for any
help available, I am real newbie (so please be gentle) and choose to run
Mandrake 9.2 as it appears quite friendly (or so I thought!).
I have been followi
21 matches
Mail list logo
