Hi,
i am running * 1.0.9 with a newer version of the TE405P.
Modprobe wct4xxp and ztcfg are OK.
zap show channels only shows me the following.
my zapata.conf:
[pstn]
switchtype=euroisdn
pridialplan=unknown
prilocaldialplan=unknown
usecallingpres=yes
busydetect=no ; not need on pri
callprogr
On Wed, Jul 13, 2005 at 05:19:08PM +0200, Kib Eki wrote:
> Hi,
>
> i am running * 1.0.9 with a newer version of the TE405P.
>
> Modprobe wct4xxp and ztcfg are OK.
>
> zap show channels only shows me the following.
>
> my zapata.conf:
> [pstn]
Shouldn't that be "[channels]" ?
> Why can't i see
On Wednesday 13 Jul 2005 16:19, Kib Eki wrote:
> Hi,
>
> i am running * 1.0.9 with a newer version of the TE405P.
>
> Modprobe wct4xxp and ztcfg are OK.
>
> zap show channels only shows me the following.
>
> my zapata.conf:
[...]
> Why can't i see or use my channels?
You're not going to get anywhe
What kind of output do you get with ztcfg -vv ??
--
Tom
On 7/13/05, Tzafrir Cohen <[EMAIL PROTECTED]> wrote:
> On Wed, Jul 13, 2005 at 05:19:08PM +0200, Kib Eki wrote:
> > Hi,
> >
> > i am running * 1.0.9 with a newer version of the TE405P.
> >
> > Modprobe wct4xxp and ztcfg are OK.
> >
> > zap s
Zaptel Configuration
==
SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 3: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 4: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Chann
Bob, there are no error messages.
This is the first time we installed a TE405P adapter to the system.
So that is the change to the system.
Bob Goddard wrote:
On Wednesday 13 Jul 2005 16:19, Kib Eki wrote:
Hi,
i am running * 1.0.9 with a newer version of the TE405P.
Modprobe wct4xxp and ztcf
That what was exactly the mistake in the configuration.
I changed [pstn] to [channels] and restartet *.
Thank you very much!
Tzafrir Cohen wrote:
On Wed, Jul 13, 2005 at 05:19:08PM +0200, Kib Eki wrote:
Hi,
i am running * 1.0.9 with a newer version of the TE405P.
Modprobe wct4xxp and ztcfg