ol
- Original Message
From: Michel <[EMAIL PROTECTED]>
To: asterisk-users@lists.digium.com
Sent: Tuesday, January 9, 2007 9:44:20 AM
Subject: [asterisk-users] ooh323c calls
Hi,
I have two asterisk servers where softphone A is connected to asterisk A.
On those two asterisk servers, ooh3
dear miche,
pls place your number of softphone B into the context "test" dial plan.
with best regards,
osochebol
- Original Message
From: Michel <[EMAIL PROTECTED]>
To: asterisk-users@lists.digium.com
Sent: Tuesday, January 9, 2007 9:44:20 AM
Subject: [asterisk-user
Hi,
I have two asterisk servers where softphone A is connected to asterisk A.
On those two asterisk servers, ooh323c is installed.
I tried to call a "test" context on asterisk B from softphone A. But I
always fall into context "default" of asterisk B.
( I don't know how to tell asterisk A ext
The configuration is this:
H323 -->>> ASTERISK --->> SIP
ooh323.conf
amaflags = billing
[xxx.xxx.xxx.xxx]
type=friend
context=h323-route
ip=xxx.xxx.xxx.xxx
port=1720
allow=all
h323id=example
accountcode=5698742
rtptimeout=60
dtmfmode=rfc2833
extension.conf
...
[h32
antonio wrote:
I have a problem: when i make i call from a device h323 to sip, i have no
cdr, and i don't see cdr variables for the channnel ooh323.
Anyone can help me ??
Thanx
On my system, this lives in /var/log/asterisk/cdr-csv/ast_h323.csv.
Regards,
Richard
_
antonio ha scritto:
I have a problem: when i make i call from a device h323 to sip, i have no
cdr, and i don't see cdr variables for the channnel ooh323.
If I remeber well, I had a similar problem and is something about
setting the amaflags to billing in the h323 config files
Anyone can h
I have a problem: when i make i call from a device h323 to sip, i have no
cdr, and i don't see cdr variables for the channnel ooh323.
Anyone can help me ??
Thanx
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To
PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] ooh323c and calls to pri
And the next information is that in header of call is information about
transfer rate zero and should be 64k (codec ulaw).
Bob.
Dne pondělí 17 říjen 2005 13:36 Coufal Bohuslav
And the next information is that in header of call is information about
transfer rate zero and should be 64k (codec ulaw).
Bob.
Dne pondělí 17 říjen 2005 13:36 Coufal Bohuslav napsal(a):
> The next information is that calls send from ooh323 to PRI has packet mode
> and it shall be circuit.
>
> B
The next information is that calls send from ooh323 to PRI has packet mode and
it shall be circuit.
Bob.
P.S. - I did use old H323 driver form asterisk up to now and it works fine.
Dne pondělí 17 říjen 2005 13:10 Coufal Bohuslav napsal(a):
> Hi I have a trouble with calls coming form ooh323c ch
Hi I have a trouble with calls coming form ooh323c channels and going to PRI.
This calls are rejected by telecom. Incoming calls form PRI and going to
ooh323c works good. When i spoke with man on telecom thay said to me that
there is wrong in something called information element. Does anybody kn
HI
I got the following error during compiling ooh323.
In function `h323_set_rtp_peer':chan_h323.c:2745: error: structure has no member named `tech_pvt'chan_h323.c: At top level:chan_h323.c:68: error: storage size of `h323_tech' isn't knownmake[2]: *** [chan_h323.lo] Error 1
make[2]: Leaving di
Kanishka Somaratne wrote:
hi
has any one used OOH323C i tried this it is installed but do not know
how to configure has any one used this, what is the best h323 addon to
use with asterisk
OOH323 has no jitterbuffer and does not work with cisco gw (incoming
calls with g729). OH323 (latest ve
> Dan - as a thought - I am messing with a H323 'capable' IP Phone and I
> am (maybe foolishly) trying to use ooh323 with no gateway, gatekeeper,
> or anything else and I am not getting it to work too well. It seems
> 'sometimes' it does work.
I'm using it to connect to Cisco Call Manager. I set
On 9/30/2005, "Dan Austin" <[EMAIL PROTECTED]> wrote:
> Asking which H323 channel is the best turns out to be a deeply
> personal issue, at least noting the responses in the past.
You got that right! 8-)
> I've tried and used all three. Here are my thoughts-
>
> Chan_h323 (the original)-
> Did n
lto:[EMAIL PROTECTED] On Behalf Of Kanishka
Somaratne
Sent: Thursday, September 29, 2005 7:28 AM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] OOH323C
hi
has any one used OOH323C i tried this it is installed but do not know
how to
configure has any one used this, what is the best h323 ad
Am Donnerstag 29 September 2005 16:28, Kanishka Somaratne schrieb:
> hi
> has any one used OOH323C i tried this it is installed but do not know how
> to configure has any one used this, what is the best h323 addon to use with
> asterisk
Hello,
for me it seems that the OOH323 Development is not fi
hi
has any one used OOH323C i tried this it is installed but do not know how to
configure has any one used this, what is the best h323 addon to use with
asterisk
___
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing lis
Hello,
I have the following setup:
(*)<--->IP<--->Micronet 5012 H.323 box <---> POTS <---> PBX (Alcatel OmniPCX)
Grand idea is to use the micronet's POTS interfaces to connect SIP
phones to the PBX and to the PSTN. I think i even managed my way in
the arcane and cryptic management interface of th
19 matches
Mail list logo
