Hi! I found, that there is 4 options for nat:
-no
-never
-yes
-always
no and never is ok
but sometimes yes, and sometimes always worked for me :-o
I am having problem diagnosing a call problem. On both a Cisco phone and a
Linksys 942 I am only getting one side of the call when connected over
I had a very similar issue just today with some Linksys SPA-941's...
Of a collection 15, 5 of them had consistent 'one-sided-audio' on
INBOUND calls, but worked fine on OUTBOUND calls.
In the end, a flash upgrade to 4.1.12(a), a factory reset, and a
reconfig fixed the problem... Same settings
Is there a public download site for Linksys/Sipura firmwares? I found
nothing on Linksys site. I'm currently running 4.1.10(e) on my SPA-942.On 5/11/06, Adrian Carter [EMAIL PROTECTED]
wrote:
I had a very similar issue just today with some Linksys SPA-941's...
Of a collection 15, 5 of them
I actually got it off the voip-info.org's Wiki search for SPA-941 .. I
found that at the believe it or not sipura.com website - 4.1.12(a).
Bruce Reeves wrote:
Is there a public download site for Linksys/Sipura
firmwares? I found
nothing on Linksys site. I'm currently running 4.1.10(e) on my
I am having problem diagnosing a call problem. On both a Cisco phone
and a Linksys 942 I am only getting one side of the call when connected
over a WAN link or internet connection. I have set nat=yes and qualify
in sip.conf and the phone registers fine. I can hear the other end, but
they do not