Yes I tried the rx and tx values, but no luck there. Then I removed
everything from this line, adsl, fax, etc. and left only asterisk and
still not working. Then I tried the following to get the dialtone and
dial digits myself
exten => _9,1,Dial(${TRUNK}/)
And that didn't work either. I also ad
Hi Mehmet,
On Tue, May 03, 2005 at 11:20:44AM -0400, You wrote:
> I tried that and it didn't work. Then I decided to use a different phone
> line. I had not thought about this before, it just didn't occur to me.
> And everything worked fine. The phone line that doesn't work is my ADSL
> line.
I tried that and it didn't work. Then I decided to use a different phone
line. I had not thought about this before, it just didn't occur to me.
And everything worked fine. The phone line that doesn't work is my ADSL
line. Wall to splitter, one side going to ADSL router the other going
into a fa
I am in Turkey. I imagine this is due to incorrect zone information, but I
can't seem to be able to find the correct values for Turkey. I tried
guessing them with no luck.
DTMF tones in Turkey are the same as the standards everywhere. The other
signalling tones are different (such as dial tone),
On Mon, May 02, 2005 at 01:02:34PM -0400, Mehmet Tolga Avcioglu wrote:
> I can't seem to be able to make outgoing calls with X100P card. I can
> receive calls fine and it picks up the line and sends the tones, but the
> telco doesn't recognize them. While the tones are sent I continue to
> hea
I can't seem to be able to make outgoing calls with X100P card. I can
receive calls fine and it picks up the line and sends the tones, but the
telco doesn't recognize them. While the tones are sent I continue to
hear the dial tone on the line when I pick up a parallel. I also cannot
dial from t