On Thu, Dec 22, 2005 at 01:15:31PM +0100, Remco Barende wrote:
> On Thu, 22 Dec 2005, Tzafrir Cohen wrote:
>
> >On Thu, Dec 22, 2005 at 11:06:50AM +0100, Agustin Gudiño wrote:
> >>the thing is: I first had problems loading the drivers and was the zaptel
> >>init file that I will post below
> >
> >
On Thu, 22 Dec 2005, Tzafrir Cohen wrote:
On Thu, Dec 22, 2005 at 11:06:50AM +0100, Agustin Gudiño wrote:
the thing is: I first had problems loading the drivers and was the zaptel
init file that I will post below
What's wrong with a simple 'modprobe qozap; modprobe wcfxo; ztcfg' ?
(With no sl
On Thu, Dec 22, 2005 at 11:06:50AM +0100, Agustin Gudiño wrote:
> the thing is: I first had problems loading the drivers and was the zaptel
> init file that I will post below
What's wrong with a simple 'modprobe qozap; modprobe wcfxo; ztcfg' ?
(With no sleeps).
Just remove the post-install execu
Message -
From: <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
Sent: Thursday, December 22, 2005 9:55 AM
Subject: Re: [Asterisk-Users] Problem with octobri and x100p clone
have you checked the order the modules are loaded and that
have you checked the order the modules are loaded and that this matches
the zaptel.conf ?
[EMAIL PROTECTED] wrote on 22.12.2005 09:48:55:
> Hi everybody,
> I have a problem with my *..
> I have an Octobri Card working good..
> and 2 x100p clones ..
> the fact is that * modeprobes ok and load dri
Hi everybody,
I have a problem with my *..
I have an Octobri Card working good..
and 2 x100p clones ..
the fact is that * modeprobes ok and load drivers
ok.
but when I want to make a call outside, I get this
error
-- Executing Dial("SIP/203-7f0a",
"Zap/g1/69X65|30") in new stackDec 19 1
