From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of
cov...@ccs.covici.com
Subject: Re: [asterisk-users] Problems with meetme in 1.4.26
Danny Nicholas wrote:
>> Hi list,
>>
>> I was going through my dialplan tod
Danny Nicholas wrote:
> Hi list,
>
> I was going through my dialplan today and found these 2 oddities
> with meetme using DAHDI to join the conference.
>
> 1. Although music on hold is indicated, I don't get any sound until I press
> *. Then the conference menu plays and all is well
Hi list,
I was going through my dialplan today and found these 2 oddities
with meetme using DAHDI to join the conference.
1. Although music on hold is indicated, I don't get any sound until I press
*. Then the conference menu plays and all is well except -
2. According to the instru
I'm using meetme with three SIP calls, updated to the latest Asterisk CVS
(as of around 10am Nov 3). After a minute or two we start getting
substantial cutouts of the audio during the call. I'm using the ztdummy
timer, also the latest CVS release.
Suggestions for things to look at?
There are so
You need to compile zaptel with ztdummy module.
Uncomment ztdummy in Makefile.
You need have to loaded this module as kernel module before executing meetme.
Here you will find more detailed info:
http://www.voip-info.org/tiki-index.php?page=Asterisk%20timer%20ztdummy
Adam
Cytowanie "Xisco (Person
Hi everybody,
I'm new in *, i have installed over fedora core 3,
with kernel version 2.6 and ztdummy.
I have created one conference in meetme.conf and I
have modified properly extension.conf. But when I try to do a call to this
extension I get the following errors:
-- Executing
Answer(
On 08/01/2005 15:01 Dean Thompson said the following:
Just not sure whether it is SJPhone playing up and not sending the right
signal for the #, or whether there is a more underlying problem here.
in which case you could try using a dialplan with Read() and SayDigits() to
see of the SJPhone is ac
Hi,
Dinesh Nair wrote:
On 08/01/2005 11:35 Dean Thompson said the following:
Thanks for pointing that out. I have made the appropriate
configurations, but the system stil refuses to accept the pin for the
conference.
The definition now looks like the following:
meetme.conf file:
conf => 1234 OR
On 08/01/2005 11:35 Dean Thompson said the following:
Thanks for pointing that out. I have made the appropriate
configurations, but the system stil refuses to accept the pin for the
conference.
The definition now looks like the following:
meetme.conf file:
conf => 1234 OR
conf => 1234,5678
+-->
Hi!,
[...]
I know this question may have been asked before (although the archives
don't seem to suggest it), but has anyone had any problems with Asterisk
accepting a PIN number for a conference room.
At this point in time I have established the conference definition in
the meetme.conf file as well
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:asterisk-users-
> [EMAIL PROTECTED] On Behalf Of Dean Thompson
> Sent: Thursday, January 06, 2005 6:01 AM
> To: asterisk-users@lists.digium.com
> Subject: [Asterisk-Users] Problems with MeetMe accepting confere
Hi,
I know this question may have been asked before (although the archives
don't seem to suggest it), but has anyone had any problems with Asterisk
accepting a PIN number for a conference room.
At this point in time I have established the conference definition in
the meetme.conf file as well as
Hi everybody,
I'm trying to use MeetMe(2000|p) in order to enter in a conference
room. But when a mobile or a SIP call press '#' to go out from it,
everybody goes out. Instead when a analg press it, all works fine.
Anyone else have this problem?? Can anybody help me please??
Thanks a lot.
Reg
Good afternoon,
I'm trying to use MeetMe in an AGI script written in Perl, as follows:
print "EXEC MeetMe 2000|p \n";
$res = checkresult();
The problem that I have is that when a user press '#' in order to exit
from the conference, everybody goes out. This is randomized because
sometimes doesn
Good afternoon,
I'm trying to use MeetMe in an AGI script written in Perl, as follows:
print "EXEC MeetMe 2000|p \n";
$res = checkresult();
The problem that I have is that when a user press '#' in order to exit
from the conference, everybody goes out. This is randomized because
sometimes do
Hi,
Now I'm trying to use the meetme application like
as follows:
exten =>_917878822,1,Answer.
exten =>_917878824,2,MeetMe,1|p
The problem that I have is when a user press '#' in
order to exit from de conference room, all users go out and the conference room
finish for all it.
There a
16 matches
Mail list logo