[Asterisk-Users] RE: help required plzzzzzzzzzz

Muhammad Zeeshan Latif Thu, 08 Jun 2006 06:12:46 -0700

Sir

Thanks so much but I have done lots and lots of googling around and I also had a grip on this file earlier.

I have already tried this but this is for the T1 scenerio.

I am looking for the ISDN PRI over E1 and it is not doing any good to me.

The exact card on the Nortel 11c is NTBK50AA. Which is an E1/PRI card.

It seems to me that u have taken help from that file I have seen the mailing list archives and seems that people are using 5ess instead of euroisdn.

In my case the physical interface does not go up and te110p indicates red led all the time some times goes yellow.

I have confirmed the cable it work on other links.

Is underneath the only change u made to the described config of meridian and what was the value u put in <dch> under in ld 96.

ENL SERV <dch>

Best Regards

Mohammad Zeeshan Latif

Sr. WAN Engineer

NETWORK DIRECTORATE

0092-51-90391020, 0092-321-5181157

From: Greg Camp [mailto:[EMAIL PROTECTED]
Sent: Thursday, June 08, 2006 5:55 PM
To: Muhammad Zeeshan Latif
Subject: RE: help required plzzzzzzzzzz

Good luck.

Thanks,
Greg

From: Muhammad Zeeshan Latif [mailto:[EMAIL PROTECTED]
Sent: Thursday, June 08, 2006 2:41 AM
To: [EMAIL PROTECTED]
Subject: help required plzzzzzzzzzz

Hi sir

I need ur help as I read ur post to google group asterisk-users. Which is as under

“

Update: SUCCESS!!! There were two subtle items that allowed our Opt81C
to talk PRI to * using a TE110P:

1) On the 81C in LD 96 we had to ENL SERV <dch> for the d-channel.

2) It appears that the TE110P needs a decent "refresh" time for the
b-channels to come up cleanly. For example, on the Nortel if you
disable the T1 or d-channel and re-enable it quickly (specifically,
anything shorter than about 45 seconds) the TE110P won't come up clean.
The Nortel will show all the b-channels as MBSY or FE MBSY. However, if
you wait 45s - 1min then the d-channel and b-channels will come up clean
every time.

Many thanks to all who offered suggestions and worked with us on this!

“

I am trying to connect * 1.0.9 with a TE110P card to Nortel option 11c 25.40 release and having very serious issues with both.

First and last of all I was never able to bring the channels up on asterisk nor meridian option 11c.

Can u plzzzzzzzzzzzzzz mail me the configuration of meridian and asterisk I will be very greatful for that. I request u once again plzzzzzzzzzzzzzz send me the config I will be very greatful.