Yes, there could be a problem. The op_panel shows red and green balls!
Thomas Gallaway wrote:
Matt Riddell wrote:
- Original Message - From: "Thomas Gallaway"
-big snip -
| I am just running 1 instance of the op_panel. But today I noticed
that 2
| calls got ended after
| 2 minutes 34 se
Matt Riddell wrote:
- Original Message -
From: "Thomas Gallaway"
-big snip -
| I am just running 1 instance of the op_panel. But today I noticed that 2
| calls got ended after
| 2 minutes 34 seconds. I will disable the management thing just for testes.
| __
- Original Message -
From: "Thomas Gallaway"
-big snip -
| I am just running 1 instance of the op_panel. But today I noticed that 2
| calls got ended after
| 2 minutes 34 seconds. I will disable the management thing just for testes.
| ___
I can'
Eric Wieling wrote:
[EMAIL PROTECTED] wrote:
Yes turning off echo cancelling would be fatal. We have some serious
echo going on here that I can not seem to track done. I am assuming
it is just this old building. Maybe we can go ISDN or so but the
dropped calls are rather bad.
Rnadom disconne
AIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, April 13, 2004 4:54 AM
Subject: Re: [Asterisk-Users] Random disconnect of calls
| Chris A. Icide wrote:
|
| > This was happening to me as well.
| >
| > What finally fixed it was disabling echo cancelling on the X100P cards
| >
lt;[EMAIL PROTECTED]>
Sent: Tuesday, April 13, 2004 4:54 AM
Subject: Re: [Asterisk-Users] Random disconnect of calls
| Chris A. Icide wrote:
|
| > This was happening to me as well.
| >
| > What finally fixed it was disabling echo cancelling on the X100P cards
| > in the zapata.conf fil
[EMAIL PROTECTED] wrote:
Yes turning off echo cancelling would be fatal. We have some serious
echo going on here that I can not seem to track done. I am assuming it
is just this old building. Maybe we can go ISDN or so but the dropped
calls are rather bad.
Rnadom disconnect with X100P is usually
Chris A. Icide wrote:
This was happening to me as well.
What finally fixed it was disabling echo cancelling on the X100P cards
in the zapata.conf files.
However this resulted in a horrid echo on my cisco phone when I was
using a line attached via one of my x100P cards.
So I went back and re-e
This was happening to me as well.
What finally fixed it was disabling echo cancelling on the X100P cards in
the zapata.conf files.
However this resulted in a horrid echo on my cisco phone when I was using a
line attached via one of my x100P cards.
So I went back and re-enabled echo cancelling
Hi
I am experiencing some weird behaviour. Calls get disconnected random.
There is no error in the log files.
Sometimes I can talk over 30minutes+ and it is fine. Just earlier I was
only able to talk 2 minutes per session and get disconnected. All I hear
when this happens is a fast busy.
My se
10 matches
Mail list logo
