That was how I reset the black Iaxy I have used; I've never used a blue one.
What I found was the initial provisioning would work fine, but if I tried to change the settings after having already provisioned the device, the provisioning program would hang, so I Googled for instructions on resetting the Iaxy to the factory settings. This was the procedure described at http://www.voip-info.org/wiki-IAXy . It *may* not be necessary to go through all of these steps to reset it, but it worked for me. YMMV... After provisioning, the Iaxy works great; I'd recommend it to anyone looking for an inexpensive, simple FXS. --Mike >Message: 9 >Date: Fri, 31 Mar 2006 09:05:45 -0900 >From: "Mojo with Horan & Company, LLC" <[EMAIL PROTECTED]> >Subject: Re: [Asterisk-Users] IAXY codec support and questions.. >To: Asterisk Users Mailing List - Non-Commercial Discussion > <asterisk-users@lists.digium.com> >Message-ID: <[EMAIL PROTECTED]> >Content-Type: text/plain; charset=ISO-8859-1; format=flowed > >Really all that? In my experience, which is admittedly only on the blue >iaxys and not the black ones, was just provision it, unplug power, >replug power. The black one I have now I haven't had to re-provision >yet so this could be so on them.... > > > >Michael Wallette wrote: > > >>> If you want to change >>> settings on the Iaxy, you must reset it (press the "reset" button on the >>> back, hold it for ten seconds, unplug the RJ-11, RJ-45 and power cables >>> from the Iaxy while holding the reset button, then replace the RJ-11, >>> RJ-45 and power cables) before you can push the new config to the Iaxy. >> >> > > > > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
