hello there,
i also using the same board and configure for the E1
before this i also got the same problem.
what the problem are:
1. cabling
2. and the zaptel.conf
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31 # set this to 1-15,17-31 for E1
dchan=16 # set this to 16 for E1
i get this
On Tue, 24 May 2005, Peter Svensson wrote:
On Tue, 24 May 2005, Remco Barende wrote:
I'm trying to setup a Wildcard TE110P with a PRI in The Netherlands.
I get a Red Alarm on the line.
Is there any way of debugging this? I've tried some configs that should
work but without success. Is there
On Tue, 24 May 2005, Remco Barende wrote:
> I'm trying to setup a Wildcard TE110P with a PRI in The Netherlands.
>
> I get a Red Alarm on the line.
>
> Is there any way of debugging this? I've tried some configs that should
> work but without success. Is there any way of telling if the cabling
Hi!
I'm trying to setup a Wildcard TE110P with a PRI in The Netherlands.
I get a Red Alarm on the line.
Is there any way of debugging this? I've tried some configs that should
work but without success. Is there any way of telling if the cabling is
correct or what else the problem could be?
