Dear
set an ip for sip bind ip, also srvlookup=no
try it...
On Fri, Aug 5, 2011 at 10:50 PM, Alejandro Cabrera Obed
wrote:
> Warrem thanksa lotI'll test next monday and I'll tell you.
>
> Regards
>
> 2011/8/5 Warren Selby
>
>> On Fri, Aug 5, 2011 at 7:53 AM, Alejandro Cabrera Obed > > wrote:
Warrem thanksa lotI'll test next monday and I'll tell you.
Regards
2011/8/5 Warren Selby
> On Fri, Aug 5, 2011 at 7:53 AM, Alejandro Cabrera Obed
> wrote:
>
>> Dear, I have asterisk 1.6.2.13 in a small hardware PBX (512 GB RAM and
>> Celeron), and last days when I call from one extension t
On Fri, Aug 5, 2011 at 7:53 AM, Alejandro Cabrera Obed wrote:
> Dear, I have asterisk 1.6.2.13 in a small hardware PBX (512 GB RAM and
> Celeron), and last days when I call from one extension to another of the
> same PBX after I dial the number the rings sound after 20 seconds.
>
> In the CLI log,
Dear, I have asterisk 1.6.2.13 in a small hardware PBX (512 GB RAM and
Celeron), and last days when I call from one extension to another of the
same PBX after I dial the number the rings sound after 20 seconds.
In the CLI log, when I debug the AGI, I see always goes good until
dialparties.agi, and
Hi All,
I am trying to call my own service through Asterisk and the DTMF is not
recognized . I also noticed the following issue, the phone rings for about
8-9 times before the line is picked up but when it is picked up it seems
that our system has picked up the call much earlier, I could just no
Hi people,
I'm having some trouble with my analog phone on Zap/1 not ringing directly
when i call it from the PSTN via Zap/4, after about 3 rings the analog
phones rings. Now I understand that there is a slight delay of up to 3 rings
where is the tone detection, so no phantom calls will get throug
