Try with Bri stuff 0.2.0 > 8. There where a lot of errors in the older
ones and you need very very precise clocking for what you are trying
to do.
On 5/31/05, Marcin Kuczera <[EMAIL PROTECTED]> wrote:
> hi,
> I am on fax-to-email system, basically taken from
> http://www.voip-info.org/wiki-Asteris
hi,
I am on fax-to-email system, basically taken from
http://www.voip-info.org/wiki-Asterisk+Fax+to+email
well, it seems that asterisk causes some problems so that it is impossible
to send any fax.
I.e. when I try to send a fax to asterisk (rxfax application):
normalFax--->FXS(TDM400P)--->Asteris
[EMAIL PROTECTED] a écrit :
attempting to get asterisk pbx to receive inbound faxes
have defined the necessary extension as per technote;
default]
; Answer the line and listen
exten => s,1,Answer
; Dial an extension, let asterisk give a ringtone
exten => s,2,Dial(IAX2/3987,40,r)
; Hangup if nob
attempting to get asterisk pbx to receive inbound faxes
have defined the necessary extension as per technote;
default]
; Answer the line and listen
exten => s,1,Answer
; Dial an extension, let asterisk give a ringtone
exten => s,2,Dial(IAX2/3987,40,r)
; Hangup if nobody picked up within 40
De: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] En nombre de Masakazu
Nakano
Enviado el: domingo, 21 de diciembre de 2003 5:37
Para: [EMAIL PROTECTED]
CC: [EMAIL PROTECTED]
Asunto: Re: [Asterisk-Users] RxFAX application
Hi sergio
On Fri, 19 Dec 2003 14:49:15 +0100
"Sergio Serrano Revuelto&quo
Hi sergio
On Fri, 19 Dec 2003 14:49:15 +0100
"Sergio Serrano Revuelto" <[EMAIL PROTECTED]> wrote:
> Hi all,
> I have tested RxFAX application through X100P card. When Fax
> arrive i obtain the next trace:
>
snip
> 5 (0.01679,-0.16590) -> 0.02781
> 6 ( -
Hi all,
I have tested RxFAX application through X100P card. When Fax
arrive i obtain the next trace:
-- Starting simple switch on 'Zap/1-1'
-- Executing Answer("Zap/1-1", "") in new stack
-- Executing SetMusicOnHold("Zap/1-1", "random") in new stack
-- Executing WaitMusic
Hi,
- Original Message -
From: "Steve Underwood" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, December 07, 2003 11:11 AM
Subject: Re: [Asterisk-Users] RxFAX application
> >>It seems the software FAX modem is sending out its messages regularl
Dan wrote:
Hi Steve,
- Original Message -
From: "Steve Underwood" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, December 07, 2003 10:36 AM
Subject: Re: [Asterisk-Users] RxFAX application
Hi Dan,
Dan wrote:
Hi,
I have started the * server in
Hi Steve,
- Original Message -
From: "Steve Underwood" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, December 07, 2003 10:36 AM
Subject: Re: [Asterisk-Users] RxFAX application
> Hi Dan,
>
> Dan wrote:
>
> >Hi,
> >
> >I hav
Hi Dan,
Dan wrote:
Hi,
I have started the * server in console mode (-vc) and this is what I get
now (no file saved and disconnected):
[]
It seems the software FAX modem is sending out its messages regularly,
but never hears anything recognisable come back from the far end FAX
machi
200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T
Hi all,
I have installed FAX app as described in several mails.
When a fax call is received, I get the following in the * console:
-- Starting simple switch on 'Zap/1-1'
-- Executing Answer("Zap/1-1", "") in new stack
-- Executing Ringing("Zap/1-1", "") in new stack
-- Executing W
13 matches
Mail list logo
