On Monday 01 November 2004 05:20 am, Arsen Chaloyan wrote:
> Hello all.
>
> Seems, snom200 with 3.x software versions isn't
> compliant to rfc2833, while no such problem with
> 2.04.g.
> Timestamp and event duration are increased
> simultaneously, while timestamp should points to the
> beginning of
Hello all.
Seems, snom200 with 3.x software versions isn't
compliant to rfc2833, while no such problem with
2.04.g.
Timestamp and event duration are increased
simultaneously, while timestamp should points to the
beginning of the event and event duration extends
forwards from that time.
In any cas
Hi,
sounds for me like a typical NAT problem. I would recommend to use a more
recent version like 3.52 or 3.56 you can find here
http://www.snom.com/download/share/
Regards,
Sven
On Friday 29 October 2004 08:12, Pamela Weis wrote:
> Hello group,
>
> I've a rather strange problem with my Snom2
Hello group,
I've a rather strange problem with my Snom200 telephone.
I'm using it in combination with SER, asterisk and rtpproxy.
The telephone is behind NAT and connects to SER. It can be called
without any problem from any Client on asterisk or SER.
But whenever I make a call to asterisk or oth
Hi,
I want snom to dial the number with five digits
automatically, without pressing OK button.
According to the FAQ-04-03-27-cs on dial plan I have:
Dial-Plan String: |[0-9]{5}|sip:[EMAIL PROTECTED]|d
No problem with dial completion, but unfortunately,
snom always suppresses the last digit I dia
Hi again,
> But I want snom to send '*0' instead of 'asterisk'
> when I press VMail button.
I find out (thanks to Usman) that it can be easily
substituted via dial plan of snom.
http://www.snom.com/faq/FAQ-04-03-27-cs.pdf.
Dial-Plan String: |asterisk|sip:[EMAIL PROTECTED]|d
Thanks,
Arsen.
ot; <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, October 25, 2004 1:57 AM
Subject: [Asterisk-Users] Snom200 & VMail (MWI)
> Hi all.
>
> I'm using snom200-SIP 3.54.
>
> I successfully configure snom and asterisk to work
> together (thanks to wiki).
&g
Hi all.
I'm using snom200-SIP 3.54.
I successfully configure snom and asterisk to work
together (thanks to wiki).
But I want snom to send '*0' instead of 'asterisk'
when I press VMail button.
exten => asterisk,1,VoiceMailMain(${CALLERIDNUM})
exten => *0,1,VoiceMailMain(${CALLERIDNUM})
Is it po
Try this one. Took me a while too.
http://www.snom.com/download/share/snom200-2.05c-SIP.bin
> -Original Message-
> From: M3 Freak [mailto:[EMAIL PROTECTED]
> Sent: Monday, May 17, 2004 11:42 AM
> To: [EMAIL PROTECTED]
> Subject: [Asterisk-Users] Snom200 Firmware: I
Hello all,
I've noticed several messages about the latest firmware on Snom's site,
2.05b, and today I see that another update is listed, 2.05c. However,
when I go to the download page (http://www.snom.com/support_dl_en.php),
the latest firmware version available for the Snom200 is 2.04g.
Are the
nicolas wrote:
Hi all,
Got SIP response 486 "Busy Here" back from x.x.x.x
I become this message if a call is coming in and i have read this is normal
with snom.
In what context? If the SNOM is reply-ing this when idle, this is not
normal behaviour. It is however possible that you are running an
Hi all,
Got SIP response 486 "Busy Here" back from x.x.x.x
I become this message if a call is coming in and i have read this is normal
with snom.
If it is so, then a right extension.conf is unuseable and snom be not the
right phone.
please help.
nicolas
_
Subject: [Asterisk-Users] snom200 call wait indication
>
> on my snom200 the
> call wait indication
> do not work.
>
> if a call comming in my phone say busy here, can anyone help ?
>
> nicolas
>
> ___
> Ast
on my snom200 the
call wait indication
do not work.
if a call comming in my phone say busy here, can anyone help ?
nicolas
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or upd
: [Asterisk-Users] SNOM200 + 2.05a Firmware + G729b BUG
If i use the snom 200 with firmware 2.05a (not tested with 2.04) and the
G739b codec.
Then the keys on the snom do not work with gsm it is ok.
greetings
nicolas
___
Asterisk-Users mailing list
[EMAIL
If i use the snom 200 with firmware 2.05a (not tested with 2.04) and the
G739b codec.
Then the keys on the snom do not work with gsm it is ok.
greetings
nicolas
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/
Look in your mailbox somewhere in /var/spool/asterisk. If there is a
gap in the MSG sequence numbers, or if there's a stray file in there it
will make Asterisk think you have new messages even if you don't have
new messages when you check your voicemail.
On Sat, 2003-11-08 at 12:48, Rich Adamson
> >Works correct for me. Running v2.02q software on the 200, and just finished
> >testing it.
> >
>
> Thanks I will have to play a little more then.. What date CVS of
> Asterisk are you running?
Gus,
CLI> show version
Asterisk CVS-10/25/03-13:22:42 built by [EMAIL PROTECTED] on a i686 running L
Rich Adamson wrote:
Is any one else having problems with the Snom 200 MWI??
If flashes and shows me there is a message then I go and listen to the
message but the MWI does not clear.. The only way I have found to clear
the MWI is to reboot the phone..
Gus,
Works correct for me. Running v2
> Is any one else having problems with the Snom 200 MWI??
>
> If flashes and shows me there is a message then I go and listen to the
> message but the MWI does not clear.. The only way I have found to clear
> the MWI is to reboot the phone..
Gus,
Works correct for me. Running v2.02q software o
Is any one else having problems with the Snom 200 MWI??
If flashes and shows me there is a message then I go and listen to the
message but the MWI does not clear.. The only way I have found to clear
the MWI is to reboot the phone..
___
Asterisk-User
When a Snom 200 (v2.1l) calls a C7960 (v4.4), both using g711u as default,
the conversation is extremely noisy from the Snom to the Cisco, but clear
in the reverse direction. Using a sniffer, I see packets from the Snom to
the Cisco of 87 bytes and Cisco to Snom of 214 bytes. Asterisk is CVS from
Why not ask them??
Christian Stredicke is the man to talk to.
Although, i just had a look at the SNOM website and 1.16w
is still there to download.
J
On Sun, 10 Aug 2003 16:59:37 +
"WipeOut ." <[EMAIL PROTECTED]> wrote:
*This message was transferred with a trial version of
CommuniGate(tm
Why not ask them??
Christian Stredicke is the man to talk to.
Although, i just had a look at the SNOM website and 1.16w
is still there to download.
J
On Sun, 10 Aug 2003 16:59:37 +
"WipeOut ." <[EMAIL PROTECTED]> wrote:
*This message was transferred with a trial version of
CommuniGate(tm
Look like SNOM have rolled back the firmware version of the 200's from 1.16w to 1.16q..
Anyone know why?
--
__
http://www.linuxmail.org/
Now with e-mail forwarding for only US$5.95/yr
Powered by Outblaze
___
t: Monday, March 31, 2003 1:14 AM
Subject: Re: [Asterisk-Users] SNOM200 Message Waiting works with current CVS
> Hi Tan,
> currently only if you change something in the source, but i think it would
> be nice if the phone can reach not only the 8500 extension, the username
can
> used to
day, March 30, 2003 12:23 PM
Subject: Re: [Asterisk-Users] SNOM200 Message Waiting works with current CVS
> Hi,
>
> Yes, I can confirm that too. But when the I press the button marked "MWI",
> it just says "Not Found". It looks like it is trying to dial
> [EM
om: "Andre Bierwirth" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, March 29, 2003 3:37 AM
Subject: [Asterisk-Users] SNOM200 Message Waiting works with current CVS
SNOM200 Message Waiting works with current CVS.
Thanks Mark !!!
Andre
SNOM200 Message Waiting works with current CVS.
Thanks Mark !!!
Andre
BEGIN:VCARD
VERSION:2.1
N:Bierwirth;Andre
FN:Andre Bierwirth
ORG:Andre Bierwirth - KMB Software
TITLE:Inhaber
ADR;WORK:;;Kruppstrasse 114;Frankfurt am Main;Hessen;60388;Deutschland
LABEL;WORK;ENCODING=QUOTED-PRINTABLE:Krup
29 matches
Mail list logo