t "static" on the line.
Jeff Busch
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Eric
"ManxPower" Wieling
Sent: Wednesday, December 07, 2005 11:34 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asteri
these
machines, so Zaptel information concerning echo wouldn't be relevant,
correct?
Thanks!
Jeff Busch
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mike
McMullen
Sent: Tuesday, November 29, 2005 6:26 PM
To: Asterisk Users Mailing List - Non-Co
[mailto:[EMAIL PROTECTED] On Behalf Of Mike
McMullen
Sent: Tuesday, November 29, 2005 6:26 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Static on inside end of conversation
- Original Message -
From: "Jeff Busch" <[EM
dn't be relevant,
correct?
Thanks!
Jeff Busch
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mike
McMullen
Sent: Tuesday, November 29, 2005 6:26 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-User
I have a very similar server, pstn setup, phones, and user base, and I
switched over to G729 codec 'cause the polycoms support it. While the
call quality has dropped ever so slightly (I have received no complaints
from my users however), snaps, crackles, clicks and pops are gone. I
did not ha
PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Steve
Blair
Sent: Tuesday, November 29, 2005 4:33 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Static on inside end of conversation
Jeff Busch wrote:
You are correct. Inside means the IP Netw
- Original Message -
From: "Jeff Busch" <[EMAIL PROTECTED]>
Hello,
I am running the following configuration:
2.8ghz P4 with 1GB of RAM
Audiocodes MP-108 connected to 5 POTS lines
Polycom IP-500 phones
[EMAIL PROTECTED] 1.3 (this is Asterisk 1.0.9)
End users are complaining of an ec
ovember 29, 2005 4:33 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Static on inside end of conversation
Jeff Busch wrote:
You are correct. Inside means the IP Network and Outside means the
PSTN accessible via the Audiocodes MP-108 ga
rcial Discussion
Subject: Re: [Asterisk-Users] Static on inside end of conversation
Jeff Busch wrote:
>You are correct. Inside means the IP Network and Outside means the
>PSTN accessible via the Audiocodes MP-108 gateway.
>
>No QoS.
>
>
>
We've seen echo on congested LANs
teve
Blair
Sent: Tuesday, November 29, 2005 4:20 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Static on inside end of conversation
Jeff Busch wrote:
Hello,
I am running the following configuration:
2.8ghz P4 with 1GB of RAM
Audiocodes MP-108 conn
: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Static on inside end of conversation
Jeff Busch wrote:
>Hello,
>
>I am running the following configuration:
>
>2.8ghz P4 with 1GB of RAM
>Audiocodes MP-108 connected to 5 POTS lines Polycom IP-5
Jeff Busch wrote:
Hello,
I am running the following configuration:
2.8ghz P4 with 1GB of RAM
Audiocodes MP-108 connected to 5 POTS lines
Polycom IP-500 phones
[EMAIL PROTECTED] 1.3 (this is Asterisk 1.0.9)
End users are complaining of an echo and static on the inside end (the
internal side)
Hello,
I am running the following configuration:
2.8ghz P4 with 1GB of RAM
Audiocodes MP-108 connected to 5 POTS lines
Polycom IP-500 phones
[EMAIL PROTECTED] 1.3 (this is Asterisk 1.0.9)
End users are complaining of an echo and static on the inside end (the
internal side), but the outside end o
13 matches
Mail list logo
