I just installed a new TDM400P with one FXO interface
in slot 4 (how it came from Digium). This box is
running Debian with a 2.6.10-rc2-mm3 kernel. After
the make linux26 and make install in /usr/local/src/zaptel,
I can see contents in /dev/zap but any attemp to
touch for example /dev/zap/ctl g
I can see contents in /dev/zap but any attemp to
touch for example /dev/zap/ctl gets a no such
device or address ...
May be a stupid suggestion, but have you loaded the
wctdm driver by doing a "modprobe wctdm" ??
Regards
Shahed
___
Asterisk-Users mailin
er 22, 2004 4:23 PM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] TDM400P install on Debian 2.6.10
I just installed a new TDM400P with one FXO interface
in slot 4 (how it came from Digium). This box is
running Debian with a 2.6.10-rc2-mm3 kernel. After
the make linux26 and make insta
Not such a stupid question :)
The paper instructions included with the card failed
to mention that needed to be done manually :)
Up and running :)
-Dorn
On Wed, Dec 22, 2004 at 10:34:17PM -0800, Shahed wrote:
>
> >I can see contents in /dev/zap but any attemp to
> >touch for example /dev/zap