Commercial Discussion"Subject: Re: [Asterisk-Users] TE205P in loopback?Date: Wed, 28 Sep 2005 22:28:02 -0700
It flashes red until the properly made cables are connected and then should turn to solid green. Again, I suspect your cable is the issue. Are all the drivers loaded? ztcfg? Aster
:
Franciraldo Cavalcante Junior
To: asterisk-users@lists.digium.com
Sent: Wednesday, September 28, 2005 6:47
PM
Subject: Re: [Asterisk-Users] TE205P in
loopback?
The board flashes red without cables and continues flashing red after
cables are connected. Should it flash
onTo: "Asterisk Users Mailing List - Non-Commercial Discussion"Subject: Re: [Asterisk-Users] TE205P in loopback?Date: Wed, 28 Sep 2005 21:12:08 -0700
If the cables are connected and the lights are still flashing red then I suspect that the cable is the issue.
- Original Message
: [Asterisk-Users] TE205P in
loopback?
I did the cable and configuration as recomended, but I may have
another problem. After I run:
modprobe zaptel
modprobe wct2xxp
I don't see the boards flashing green it's flashing red and in sync, as I
implicitly understand
cabled and configured, keep green?
How can I debug this?
any help is appreciated.
-f
From: "Steve Totaro" <[EMAIL PROTECTED]>Reply-To: Asterisk Users Mailing List - Non-Commercial DiscussionTo: "Asterisk Users Mailing List - Non-Commercial Discussion"Subject: Re: [Asterisk
: Wednesday, September 28, 2005 5:46 PM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] TE205P in loopback?
I'm a new * user and had just intalled A TE205P line in my Linux machine
(running linux kernel 2.6.10). I would like to test the T1 interface but I
don't have an ISDN PRI
then all the B channels, if this happens, you have
done it correctly.
thanks,
Steve
- Original Message -
From:
Franciraldo Cavalcante Junior
To: asterisk-users@lists.digium.com
Sent: Wednesday, September 28, 2005 4:46
PM
Subject: [Asterisk-Users] TE205P in
I'm a new * user and had just intalled A TE205P line in my Linux machine (running linux kernel 2.6.10). I would like to test the T1 interface but I don't have an ISDN PRI interface available right now. Is there a way to make some sort of loopback test? How to configure it? Do I need the cables to
