- Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Timing source on SMP system
try zaprtc from www.junghanns.net. Works fine in my SMP systems
- Original Message -
From: Chad Brown [EMAIL PROTECTED]
Date: Sat, 18 Sep 2004 20:23:54 -0700
Subject: [Asterisk-Users] Timing source on SMP
-
Non-Commercial Discussion [EMAIL PROTECTED]
Sent: Sunday, September 19, 2004 1:13 PM
Subject: RE: [Asterisk-Users] Timing source on SMP system - Disable RTC
forzaprtc
Does anyone know where to disable rtc support on redhat 9.0 using make
menuconfig?
I thought I disabled it but still got
, September 19, 2004 11:37 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Timing source on SMP system - Disable
RTCforzaprtc
It was my understanding that you don't 'disable' rtc, but recompile it
as a
kernel module.
Again, just my understanding as I can't
On Sun, 2004-09-19 at 11:58 -0700, Chad Brown wrote:
Any help would be appreciated as I am a novice trying to work around a
difficult situation.
This is what the zaprtc helpfile says:
zaprtc, getting zaptel timing out of your realtime clock
:[EMAIL PROTECTED] On Behalf Of Dave Cotton
Sent: 19 September 2004 20:06
To: Asterisk List
Subject: RE: [Asterisk-Users] Timing source on SMP system -
DisableRTCforzaprtc
On Sun, 2004-09-19 at 11:58 -0700, Chad Brown wrote:
Any help would be appreciated as I am a novice trying to work around
Chad Brown wrote:
Does anyone know where to disable rtc support on redhat 9.0 using make
menuconfig?
I thought I disabled it but still got the following error when trying to
make zaprtc:
zaprtc.c:109: storage size of `rtc_irq_timer' isn't known
zaprtc.c:719: storage size of `rtc_fops' isn't known
,
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kristian
Kielhofner
Sent: Sunday, September 19, 2004 1:29 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Timing source on SMP system - Disable RTC
forzaprtc
Chad Brown
Chad Brown wrote:
Kristian,
I have 2 X100P cards but neither work on my Compaq DL360 G2. The system
will not even boot! Take a look at my initial post and let me know if
you have any other advice. Regardless, thanks for your post!
Oh that was you? I read that post earlier but obviously didn't put
] On Behalf Of Kristian
Kielhofner
Sent: Sunday, September 19, 2004 6:27 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Timing source on SMP system - DisableRTC
forzaprtc
Chad Brown wrote:
Kristian,
I have 2 X100P cards but neither work on my Compaq
I need a timing device for the DL360G2 for conferencing and
meetme. For a timing device I have 2 X100P cards but neither will work in my
DL360G2. The system will not even boot with either card in the system. Other
PCI cards seems to work fine. I called Digium support and was told that
try zaprtc from www.junghanns.net. Works fine in my SMP systems
- Original Message -
From: Chad Brown [EMAIL PROTECTED]
Date: Sat, 18 Sep 2004 20:23:54 -0700
Subject: [Asterisk-Users] Timing source on SMP system
To: Asterisk Users Mailing List - Non-Commercial Discussion
[EMAIL PROTECTED
-Users] Timing source on SMP system
try zaprtc from www.junghanns.net. Works fine in my SMP systems
- Original Message -
From: Chad Brown [EMAIL PROTECTED]
Date: Sat, 18 Sep 2004 20:23:54 -0700
Subject: [Asterisk-Users] Timing source on SMP system
To: Asterisk Users Mailing List - Non
12 matches
Mail list logo
