Hello
i use TDM11B,and i'm connecting the analog telephone to channel 1, and i'm
trying to use
*CLI> dial 11
at asterisk Console but the following message appeares, and no ringing occures
Executing Dial("OSS/dsp", "Zap/1|20") in new stack
Apr 1 19:13:42 NOTICE[3781]: app_dial.c:746 dial_exec: U
check that the phone cord is correctly attached to the tdm11b.
Also verify if the channel isnÂt alarmed with
zap show channel N whewre N the channel number.
[EMAIL PROTECTED] wrote:
Hello
i use TDM11B,and i'm connecting the analog telephone to channel 1, and i'm
trying to use
*CLI> dial 11
at aster
Firstly, thanks too much for your help...
i ensured that the phone is already connected fine.
when i used command :
show channel 1
the result is
1 is not a known channel
i tried also show channel 1, show channel 2, show channel 3 show channel 4
and i obtained the same result.
waiting for respo
i also tried
localhost*CLI> show channels
and i get:
OSS/dsp (local 11 2 ) Ringing (None)(None)
1 active channel(s)
and then i tried
localhost*CLI> show channel OSS/dsp
and i get
-- General --
Name: OSS/dsp
Type: Console
UniqueID: 1112
