E&M is analogue, not digital...
Not true. You can have E&M signaling on a T1
CAS interface. Likewise T1 CAS interfaces can also be setup for FXS
and FXO signaling. This is just how the robbed bits
communicate. With E&M wink before a remote switch sends a call
to a local
[Asterisk-Users] W&M Wink timings for Nortel
Rich Adamson wrote:
> My guess is the asterisk implementation for E&M signaling is probably
> "one" end of that interface, watching the signaling bits and translating
> those into something * can use to terminate the call. Howev
Steve Underwood wrote:
I had trouble with wink start (or delayed dial, or various other names
for the same thing) a long time ago. I think the switch was an AXE. The
spec said as soon as the seize came in I could start the wink. This
turned out not to be true. I needed to wait a while, or the PS
Hi Eric,
Eric Wieling wrote:
Does anyone know the default E&M Wink timings for Nortel DID ports?
The default settings on Asterisk are:
;prewink: Pre-wink time (default 50ms)
;preflash:Pre-flash time (default 50ms)
;wink:Wink time (default 150ms)
;flash: Flash t
Rich Adamson wrote:
My guess is the asterisk implementation for E&M signaling is probably
"one" end of that interface, watching the signaling bits and translating
those into something * can use to terminate the call. However, I'll
be the first to admit I'm not a programmer and probably wouldn't
r
> >>>I'm confused. Digium cards do not support E&M trunks, which are older
> >>>interfaces that include either a two-wire or four-wire audio "plus"
> >>>two additional wires called the "E" and the "M" leads. So, Wink
> >>>timing is irrelevant (unless I'm misunderstanding your question).
> >>
> >>Uh
Rich Adamson wrote:
On February 18, 2005 12:32 pm, Rich Adamson wrote:
I'm confused. Digium cards do not support E&M trunks, which are older
interfaces that include either a two-wire or four-wire audio "plus"
two additional wires called the "E" and the "M" leads. So, Wink
timing is irrelevant (unle
> On February 18, 2005 12:32 pm, Rich Adamson wrote:
> > I'm confused. Digium cards do not support E&M trunks, which are older
> > interfaces that include either a two-wire or four-wire audio "plus"
> > two additional wires called the "E" and the "M" leads. So, Wink
> > timing is irrelevant (unless
Eric Wieling wrote:
Rich Adamson wrote:
Does anyone know the default E&M Wink timings for Nortel DID ports?
The default settings on Asterisk are:
;prewink: Pre-wink time (default 50ms)
;preflash:Pre-flash time (default 50ms)
;wink:Wink time (default 150ms)
;flash:
Brancaleoni Matteo wrote:
Hi,
Il giorno ven, 18-02-2005 alle 12:44 -0600, Eric Wieling ha scritto:
The Digium Tx00P and TE*xxxP support E&M Wink
E&M is analogue, not digital...
digium cards support it over digital, like they supports fxs/fxo
to a channel bank . same from E&M
The interface describe
Hi,
Il giorno ven, 18-02-2005 alle 12:44 -0600, Eric Wieling ha scritto:
> The Digium Tx00P and TE*xxxP support E&M Wink
E&M is analogue, not digital...
digium cards support it over digital, like they supports fxs/fxo
to a channel bank . same from E&M
The interface described here is analogue, afa
On February 18, 2005 12:32 pm, Rich Adamson wrote:
> I'm confused. Digium cards do not support E&M trunks, which are older
> interfaces that include either a two-wire or four-wire audio "plus"
> two additional wires called the "E" and the "M" leads. So, Wink
> timing is irrelevant (unless I'm misun
Rich Adamson wrote:
Does anyone know the default E&M Wink timings for Nortel DID ports?
The default settings on Asterisk are:
;prewink: Pre-wink time (default 50ms)
;preflash:Pre-flash time (default 50ms)
;wink:Wink time (default 150ms)
;flash: Flash time (defa
Correct. Incoming DID calls on the E&M/Wink channels fail about 1/2
to 1/3 of the time.
Brian McSpadden wrote:
I assume the defaults do not work? I've successfully used the defaults
with Avaya and Mitel switches with no problems.
On Fri, 18 Feb 2005 10:04:09 -0600, Eric Wieling <[EMAIL PROTECTED
> Does anyone know the default E&M Wink timings for Nortel DID ports?
>
> The default settings on Asterisk are:
>
> ;prewink: Pre-wink time (default 50ms)
> ;preflash:Pre-flash time (default 50ms)
> ;wink:Wink time (default 150ms)
> ;flash: Flash time (defaul
I assume the defaults do not work? I've successfully used the defaults
with Avaya and Mitel switches with no problems.
On Fri, 18 Feb 2005 10:04:09 -0600, Eric Wieling <[EMAIL PROTECTED]> wrote:
> Does anyone know the default E&M Wink timings for Nortel DID ports?
>
> The default settings on Ast
Does anyone know the default E&M Wink timings for Nortel DID ports?
The default settings on Asterisk are:
;prewink: Pre-wink time (default 50ms)
;preflash:Pre-flash time (default 50ms)
;wink:Wink time (default 150ms)
;flash: Flash time (default 750ms)
;star
17 matches
Mail list logo
