Dear Claudio,
I'm testing the welltech gateways (3804 firmware 4fxosip.102) and I am trying to make the Asterisk answer the calls from 3508 directly (with 2nddial off) it means throw hotline service.
Do you know how to make the Asterisk answer a call from :pstn-to-3508 and 3508-hotline-Asterisk
Caio,
Do you have the firmware files ?, I have a 3804 h323 and I'd like to upgrade
it to SIP.
The files are:
- 2m4sipfxo.103
- 4fxosip.103
Kind regards,
Miguel
---
From: Caio Augusto Martimiano da Costa [EMAIL PROTECTED]
Subject: [Asterisk-Users] Welltech FXO
Hi,
I'm using the Welltech pstn GW 3804 (four analogue ports) and in some
way I agree with Jorge's points.
I am also using two Welltech SIP Phone LAN 201
I set them in proxy mode.
I am still left with some problems.
I can talk between the two SIP phones only with reinvite (I cannot talk
when *
Claudio,
Try the SIP version 103. It is rock solid, and have FSK CID.
Unfortunately, I think, DTMF CID is used in Italy, which is not (yet?)
supported.
Also, polarity detection is missing in this version, but Welltech
promise to be included in the next release.
However, your problems seems to
Hi,
After a long way of problems (shipping, customs, etc) finally I got
Welltech working. Here below my comments.
- The documentation is poor and have errors
- The web configuration is not complete. However is useful for the basic
configuration parameters. The command line is necessary for
start working.
Joseph Tanner
[EMAIL PROTECTED]
Message: 15
Date: Fri, 02 Apr 2004 11:13:35 -0500
From: Jorge Mendoza [EMAIL PROTECTED]
Organization: TCC S.A.
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] Welltech FXO: initial tests
Reply-To: [EMAIL PROTECTED]
Hi,
After a long way