Hello,
I have X100P card
but exten = _9X.,1,Dial(Zap/1/${EXTEN:1})
does not work.
The error is app_dial.c:803
dial_exec: Unable to create channel of type 'Zap' (cause
0)
Zap show channel, lspci etc show everything is
normal.
Because X100P is Intel 537 modem, so can I use it as true modem
Not to ask stupid questions, but did you configure zaptel.conf,
zapata.conf, and run ztcfg prior to launching asterisk?
-mishehu
Hello,
I have X100P card but exten = _9X.,1,Dial(Zap/1/${EXTEN:1}) does not
work.
The error is app_dial.c:803 dial_exec: Unable to create channel of type
'Zap'
Because X100P is Intel 537 modem, so can I use it as true modem for test?
Did any one use X100P as a modem?
Interesting question, which I too am interested.
The link below talks about usign the 537
as a X100P.
http://journal.codeslinger.com/getentry.html?stamp=20040221_1905
Not an answer to your
On Wed, 2004-12-22 at 22:03, Shahed wrote:
Because X100P is Intel 537 modem, so can I use it as true modem for test?
Did any one use X100P as a modem?
Interesting question, which I too am interested.
I have a similay problem with an S100U on channel 2 - ztcfg says it
can't find the device
]
[mailto:[EMAIL PROTECTED] Behalf Of I put the Who?
in Mishehu
Sent: Wednesday, December 22, 2004 9:37 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] X100P dead?
Not to ask stupid questions, but did you configure zaptel.conf,
zapata.conf, and run
PM
Subject: RE: [Asterisk-Users] X100P dead?
[EMAIL PROTECTED] asterisk]# ztcfg -vv
Zaptel Configuration
==
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
1 channels configured.
Zapata.conf:
;
[channels]
language=en
context=COline
signalling
Sent: Tuesday, December 21, 2004 9:58 PM
Subject: Re: [Asterisk-Users] X100P dead?
Try
exten = _9x,1,Dial(Zap/1/$[EXTEN:1},,)
instead of
exten = _9X.,1,Dial,Zap/1/${EXTEN:1}
Lyle
- Original Message -
From: Buu Hao Tran [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non