Is opermode set via asterisk or do you need to do
modprobe wcfxs opermode=UK
chris
- Original Message -
From: Nicolas Gudino [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, June 26, 2004 12:43 AM
Subject: Re: [Asterisk-Users] X101P on a UK BT line txgain issue
Hi
Chris Stenton wrote:
Is opermode set via asterisk or do you need to do
modprobe wcfxs opermode=UK
You need to do modprobe wcfxs opermode=UK
This will only work if you have the TDM400 FXO modules. The X101P is a
600 ohm US/JATE card only.
Richard
___
I do get echo, lots of it, I am waiting until the new patch they are all
on about on the list gets into a stable release, then I will upgrade and
see if that does the trick.
I am told that some of the echo may be to do with a mismatch in the
impedance with the BT line.
I had an adsl problem a
I do get echo, lots of it, I am waiting until the new patch they are all
on about on the
list gets into a stable release, then I will upgrade and see if that does
the trick.
The patch didn't seem to work for me.
I am told that some of the echo may be to do with a mismatch in the
impedance
Bond [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, June 25, 2004 9:35 AM
Subject: RE: [Asterisk-Users] X101P on a UK BT line txgain issue
I do get echo, lots of it, I am waiting until the new patch they are all
on about on the
list gets into a stable release, then I will upgrade
To: [EMAIL PROTECTED]
Subject: RE: [Asterisk-Users] X101P on a UK BT line txgain issue
I am finding that I have to increase the txgain in zapata.conf to 8 when
my X101P is connected to my BT phone line, otherwise people can hardly
hear me. This then gives echo issues.
Im having the same issue so
I do get echo, lots of it, I am waiting until the new patch they
are all on about on the list gets into a stable release, then I
will upgrade and see if that does the trick.
Not likely the patch will get applied to the Stable release since its
been stated several times that's all but
that it can't be done.
Peter
-Original Message-
From: Rich Adamson [mailto:[EMAIL PROTECTED]
Sent: 25 June 2004 14:33
To: [EMAIL PROTECTED]
Subject: RE: [Asterisk-Users] X101P on a UK BT line txgain issue
I do get echo, lots of it, I am waiting until the new patch they
are all
Telecom )
- Original Message -
From: Rich Adamson [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, June 25, 2004 2:32 PM
Subject: RE: [Asterisk-Users] X101P on a UK BT line txgain issue
I do get echo, lots of it, I am waiting until the new patch they
are all on about
)
Zcomplex(5) =47 nF // 510 ohms + 150 ohms ( Russian Telecom )
- Original Message -
From: Rich Adamson [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, June 25, 2004 2:32 PM
Subject: RE: [Asterisk-Users] X101P on a UK BT line txgain issue
I do get echo, lots
Chris Stenton wrote:
Thanks for the info Rich looks like I'll have to wait for the new FXO
module. The impedence in the UK is zcomplex(2) which looks a long way away
from a straight 600 ohms.
Here is the list of zcomplex impedences
Zcomplex(1) = 150 nF // 750 ohms + 270 ohms ( European
Hi Richard,
These complex impedances are all supported in the Silabs chips used in
both the new TDM FXO module and the FXS module, but the driver currently
sets them to 600 Ohms.
I guess at some stage a patch will appear to perhaps set these depending
on the default tonezone set in the
I am finding that I have to increase the txgain in zapata.conf to 8 when my
X101P is connected to my BT phone line, otherwise people can hardly hear me.
This then gives echo issues.
Do other people have the same problem on BT lines. I was wondering if I
should give BT a call and get them to
I am finding that I have to increase the txgain in zapata.conf to 8 when
my X101P is connected to my BT phone line, otherwise people can hardly
hear me. This then gives echo issues.
Im having the same issue so far im on rxgain=2.0 and txgain=6.0. Seems to
work perfectly apart from the echo
-Users] X101P on a UK BT line txgain issue
I am finding that I have to increase the txgain in zapata.conf to 8 when
my X101P is connected to my BT phone line, otherwise people can hardly
hear me. This then gives echo issues.
Do other people have the same problem on BT lines. I was wondering
Chris Stenton wrote:
I am finding that I have to increase the txgain in zapata.conf to 8 when my
X101P is connected to my BT phone line, otherwise people can hardly hear me.
This then gives echo issues.
Do other people have the same problem on BT lines. I was wondering if I
should give BT a call
Chris,
Do you get echo issues? If not could you let us have your config and
which echo canceller you use.
Thanks
Chris
On Thu, 2004-06-24 at 20:40, Chris Lee wrote:
Chris Stenton wrote:
I am finding that I have to increase the txgain in zapata.conf to 8 when my
X101P is connected to my BT
17 matches
Mail list logo
