Re: [Asterisk-Users] Zap channel occasionally misses dialing the first digit

On February 1, 2005 11:55 am, Peter Svensson wrote: > Do you have overlap dialing enabled on the outgoing interface? There used > to be a bug where the Asterisk zap channel tried to send the overlap > digits before the SETUP ACK was received. Nope, all enbloc dialled. -A.

Re: [Asterisk-Users] Zap channel occasionally misses dialing the first digit

On Tue, 1 Feb 2005, Andrew Kohlsmith wrote: > I am seeing this too, only I'm using 100% PRI. I'm not sure how it would be > a > Zap problem since the Zap driver doesn't see any digits when you're dealing > with PRI. > > Several tries later and it suddenly works It's very sporadic. Do yo

Re: [Asterisk-Users] Zap channel occasionally misses dialing the first digit

On February 1, 2005 11:03 am, Daryl G. Jurbala wrote: > I THINK. When dialing 1+10 digits, I occasionally get a telco > message "You must first dial a 1". When I look at the console, the > number is being sent to the ZAP channel properly. We're talking about a > couple of POTS lines on a

Re: [Asterisk-Users] Zap channel occasionally misses dialing the first digit

have a look at http://www.voip-info.org/wiki-Asterisk+zap+channels Here it tells you that you can specify a wait period. Here are some examples of complete Dial commands as they might appear in your Dialplan : exten => s,1,Dial(Zap

[Asterisk-Users] Zap channel occasionally misses dialing the first digit

I THINK. When dialing 1+10 digits, I occasionally get a telco message "You must first dial a 1". When I look at the console, the number is being sent to the ZAP channel properly. We're talking about a couple of POTS lines on a TDM400P. I'm thinking that it may be starting the dial too e