Hello
I am trying to register for fwd from * but
having problem and unable to solve it.
I keep getting this message
*CLI> NOTICE[1125329600]: File
chan_sip.c, Line 4800 (handle_response): Failed to authenticate on REGISTER to
';tag=as62a7f29b'NOTICE[1125329600]: File
chan_sip.c, Line 4
-- Forwarded message --
From: Benito Camelas <[EMAIL PROTECTED]>
Date: Wed, 28 Feb 2007 11:21:52 +0100
Subject: Problem with TE212P
To: asterisk-users@lists.digium.com
Hello.
I have a TE212 configured in E1 mode.
This is shown in a cat /proc/zaptel/2 and 3 (where the card is con
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1¢/min.--- Begin Message ---
Hi, i have installed asterisk and VICIDIAL call center and it's working fine couple days but when i reboot the computer there is the problem.this is the asterisk -vvgc
Hi Ismir.
It tries to change of slot its TDM400P, I find that it must resolv.
Good luckJosué
2006/7/26, ismir saljic <[EMAIL PROTECTED]>:
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls.
Great rates starting at 1¢/min.
-- Mensagem encaminhada --From: ismir sa
-- Forwarded message --
From: Vidura Senadeera <[EMAIL PROTECTED]>
Date: Jun 27, 2007 1:56 PM
Subject: Re: problem with one way audio
To: asterisk-users@lists.digium.com
Hi,
If you have analog or digital cards installed. make sure to configure cards
with proper signalling in /etc
Hi,
problem solved, I found somethind in this mailing list!
extensions.conf:
exten => 0237482,1,Dial,CAPI/@301:0237482,5,tr
Regards,
Kib
--- Begin Message ---
Hi *,
we successfully integrated the eicon diva 4 bri card in our Asterisk system.
I can dial in to system and route to sip peers.
I tried t
For this one, you need to ensure that res_odbc.so loads before
res_config_odbc.so. Actually, the load order in 1.8 is such that, unless
you're using static realtime, you should not be using the 'preload' directive
at all, and everything will just naturally load in the right order.
--
If I got