And what I told you works just fine. I'm taking 20+ DIDs from a single IAX
provider with no problems what-so-ever. I'll be happy to consult for you at
my normal hourly rate if you still can't figure it out.
John
Barton Hodges wrote:
Both register commands register with the iaxtel provider.
I have made no recent changes to the IAX2 config on my system. Today I
tried a 1800 call and got the below error. Not sure when this started
since only use 800 once in a while. Does anyone know if IAXTEL is
experiencing problems connecting to the 8xx gateway?
7 16:14:54
I anyone able to get calls from IAXtel, I have been trying to call between
to * systems all day with no luck. Worked fine Friday.
Thanks,
Scott
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To
I have made no recent changes to the IAX2 config on my system. Today I
tried a 1800 call and got the below error. Not sure when this started
since only use 800 once in a while. Does anyone know if IAXTEL is
experiencing problems connecting to the 8xx gateway?
7 16:14:54 WARNING[147466]:
Does everyone else here have the same problems with dialing IAXtel to
FWD as I seem to have, I have not seen this work in literally a month.
IAXtel reports back Everyone is busy. Are there a limited nuber of
pathways between the two systems?
Michael
--
Michael Graves
I am looking for a working set of config files for IAXTEL.
When I dial a 1700 number I get a busy back and see no IAX debug messages.
When I dial in to my 1700 number I get thses messages:
Tx-Frame Retry[-01] -- OSeqno: 002 ISeqno: 002 Type: IAX Subclass: ACK
Timestamp: 00044ms SCall:
I have an full-time Internet connection with a limited amount of traffic per
month included in the subscription.
What can I do to reduce the registration traffic with IAXTEL which makes
about 10MB/h?
There is any way to keep the registration active ( I have a static IP
address) without the
On Tue, 17 Feb 2004, Rich Adamson wrote:
I have an full-time Internet connection with a limited amount of traffic per
month included in the subscription.
What can I do to reduce the registration traffic with IAXTEL which makes
about 10MB/h?
There is any way to keep the registration
Hi Rich,
From: Rich Adamson [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] IAXTEL and the registration traffic
Sounds like something is not set up correctly or something else is
happening.
I just used a sniffer to qualify my connection, and over a 24 minute
period
there was a total
Hi Steve,
From: Stephen Davies [EMAIL PROTECTED]
Perhaps its that Dan's box is trying to register with IAX1? All the
attempts cause quite a flurry if the other side doesn't want to know.
Great!!! This must be my problem. I have IAX(1) still active (in order to
test my DIAX).
I will disable
Dan == Dan [EMAIL PROTECTED] writes:
Perhaps its that Dan's box is trying to register with IAX1?
Dan Great!!! This must be my problem. I have IAX(1) still active (in
Dan order to test my DIAX). I will disable it.
The iax1 module will first try to load iax1.conf before trying to load
I was wondering if there was any easy way to direct incoming calls from
IaxTel to specific extensions without having to create a separate context
for each? It seems to be pretty strait forward with FWD, SIPPhone and other
SIP based services -- you just add /Extension to the end of the
Hello all, Can someone send me a current working example of what the
entries need to look like for iaxtel and the iax.conf file inclusive of
the register line? It's been quite awhile since I have done anything with
iaxtel and I need to do a little bit of testing. Currently it appears
that I can
Hello All,
My access to IAXtel seems to be somehow broken. When I call someone at
a 700 number my * console spews forth the following:
WARNING[-1158046800]: File chan_iax2.c, Line 4798 (socket_read):
Received mini frame before first full voice frame
WARNING[-1158046800]: File chan_iax2.c, Line
Title: IAXTEL down?
Can not make any calls.
# telnet 69.73.19.178 5036
Trying 69.73.19.178...
telnet: connect to address 69.73.19.178: Connection refused
DEBUG[1133718080]: File chan_sip.c, Line 3407 (build_route): build_route: Contact hop: sip:[EMAIL PROTECTED]:5060
-- Executing
Title: IAXTEL down?
telneting won't work - telnet uses TCP, IAX is
UDP.
- Original Message -
From:
Alexander Romanov
To: [EMAIL PROTECTED]
Sent: Tuesday, December 09, 2003 10:12
AM
Subject: [Asterisk-Users] IAXTEL
down?
Can not make any calls
IAXTEL down?sorry about the HTML, not sure how that turned on
- Original Message -
From: Adam Hart
To: [EMAIL PROTECTED]
Sent: Tuesday, December 09, 2003 10:17 AM
Subject: Re: [Asterisk-Users] IAXTEL down?
telneting won't work - telnet uses TCP, IAX is UDP.
- Original Message
What about Asterisk log?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Adam Hart
Sent: Tuesday, 9 December 2003 10:29 AM
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] IAXTEL down?
IAXTEL down?sorry about the HTML, not sure how that turned
Should be up now. Found/hopefully fixed a really essoterric iax2
deadlock.
Mark
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
Thanks Mark
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mark Spencer
Sent: Tuesday, 9 December 2003 11:10 AM
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] IAXTEL down?
Should be up now. Found/hopefully fixed a really essoterric iax2
deadlock
Can not make any calls.
# telnet 69.73.19.178 5036
Trying 69.73.19.178...
telnet: connect to address 69.73.19.178: Connection refused
As mentioned yesterday on this list, iax v1 (which is udp port 5036) has
been discontinued. iax v2 (udp port 4569) replaced it, and is now
functional via
Would have probably been more appropriate to at least announce that
iax was going to disappear at some specific date, as opposed to folks
randomly discoverying it and chasing problems. (Kind of related to why
there isn't a marketing plan.)
Sorry, it was something of a side effect of
Good, glad to hear things are better. Without getting into too much techie
detail, what was the root problem?
There was just race that I introduced a while back. If calls came in
while a reload was taking place in IAX2, bad things would happen. Now
it's fixed. Originally I was thinking it
On Sunday 07 of December 2003 21:14, Mark Spencer wrote:
Good, glad to hear things are better. Without getting into too much
techie detail, what was the root problem?
There was just race that I introduced a while back. If calls came in
while a reload was taking place in IAX2, bad things
Is anyone other than me having trouble dialing out via IAXTEL? I havn't
changed my config files in weeks but seems that IAXTel calls (800 and FWD)
stopped working in the past week sometime.
Robert
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
Is anyone other than me having trouble dialing out via IAXTEL? I havn't
changed my config files in weeks but seems that IAXTel calls (800 and FWD)
stopped working in the past week sometime.
Yes, I've been having problems as well but had not taken the time to diagnose
the problem. Just did
Yes, I've been having problems as well but had not taken the time to
diagnose
the problem. Just did some looking and it appears iaxtel.com has removed
the iax v1 support. iax2 seems to be working fine.
Rich,
That solved the outbound problem.. Thanks for the hint... 800 numbers are
accessable
To add to this problem, we have been fighting a denial of service
attack on the toll-free gateways. We have installed new code to deal
with this problem hopefully. I will never understand why someone would
attack a free service.
John Lodden
Telesthetic
On Sat, 2003-12-06 at 07:45, rnc Info
John,
Did you shut down iax v1 (udp/5036) on purpose, or are we all suppose to
change to iax2 (udp/4569) forever?
Rich
To add to this problem, we have been fighting a denial of service
attack on the toll-free gateways. We have installed new code to deal
with this
Rich Adamson wrote:
On Sat, 2003-12-06 at 07:45, rnc Info Lists wrote:
Is anyone other than me having trouble dialing out via IAXTEL? I havn't
changed my config files in weeks but seems that IAXTel calls (800 and FWD)
stopped working in the past week sometime.
To add to this problem, we
On Sat, 2003-12-06 at 12:36, Olle E. Johansson wrote:
I seem to get a G729 codec on calling 1800 numbers on IAXTEL...
Temporary fault or do we have to buy a license?
/O
The toll-free gateways allows the use of G729, if you don't have that
CODEC don't show you can use it. The gateways can
) 857-3287
IAXTEL (700) 857-3287
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of John Lodden
Sent: Saturday, December 06, 2003 12:18 PM
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] IaxTel seems down
On Sat, 2003-12-06 at 12:36
The FWD bridge is currently down, as I am looking to try to find someone
else to host the IAX2 to SIP gateway so that iaxtel can remain strictly
IAX2.
Mark
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
Mark,
I cannot connect to IAX1 either
We are phasing out support for IAX1. Are the people who still *need*
IAX1?
Given that iax2 has been around and stable for a rather lengthy period,
I would doubt there is any real need for it other then to coordinate production
systems that can't be
Would have probably been more appropriate to at least announce that
iax was going to disappear at some specific date, as opposed to folks
randomly discoverying it and chasing problems. (Kind of related to why
there isn't a marketing plan.)
Sorry, it was something of a side effect of some
After battling for days trying to figure
out whatwas wrong with my iax.conf it was determined that I do not have
any inkeys set on the digium server. Now whether that is something new or
just in a few cases I am not sure. Messing around and reading on IRC and
the mailing list I could get
Anyone else having timeout problems with IAXtel? Here's the logfile output,
user names, passwords, and destination phone numbers have been changed to
protect the guilty
-- Starting simple switch on 'Zap/1-1'
-- Executing Dial(Zap/1-1,
IAX/someuser:[EMAIL PROTECTED]/[EMAIL
On Fri, 28 Nov 2003, Steve Rodgers wrote:
Anyone else having timeout problems with IAXtel? Here's the logfile output,
user names, passwords, and destination phone numbers have been changed to
protect the guilty
I just called myself. It worked fine.
--
Joel
Strange,
It's back up for me as well...
On Friday 28 November 2003 18:49, Joel Maslak wrote:
On Fri, 28 Nov 2003, Steve Rodgers wrote:
Anyone else having timeout problems with IAXtel? Here's the logfile
output, user names, passwords, and destination phone numbers have been
changed to
Hi there,
do I have a local problem, or is registration at IAXTEL impossible at the
moment? iax2 show registry permanently shows a TIMEOUT for
69.73.19.178.
Philipp
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
I'm having trouble configuring these services the
way I want. Basically I prefer using iLBC before GSM, however Iaxtel only want
to talk GSM. It _seems_ that Voicepulse prefers GSM also, because even if I put
ILBC before GSM in the "allow=" part of iax.conf, if GSM is mentioned,
Voicepulse
Ok folks I have another question. So far I have gotten my IAXTEL number and I have
been able to make calls from my asterisk system to any IAXTEL number and even to FWD
numbers. I also got FWD to work and I now can get calls to my main system. It's great
when these things work. But when I
You must use GSM with iaxtel and Voicepulse for now... I talked to the guy
from voicepulse and they said ilbc might be turned sometime in the future.
But not sure.
bkw
On Tue, 14 Oct 2003, Stig Hess wrote:
I'm having trouble configuring these services the way I want. Basically I
prefer using
Subject: Re: [Asterisk-Users] Iaxtel and
Voicepulse
You must use GSM with iaxtel and Voicepulse for now... I talked
to the guyfrom voicepulse and they said ilbc might be turned sometime in
the future.But not sure.bkwOn Tue, 14 Oct 2003, Stig Hess
wrote: I'm having trouble configuring
Is your problem related to the settings under iax.conf? I have commented
out the whole of [iaxtel2] and left in [iaxtel].
I have a problem with my setup in that I have got it to register by
putting the register command in the iax.conf, but when I call my own
number I just get silence. Output
Somebody keeps saying it is bad form to respond to one's own postings, but
I am going to do it here ...
Further experimentation and I discovered that this change to
iax.conf make the problem go away:
;
; Trust Caller*ID Coming from iaxtel.com
;
;[iaxtel]
;type=friend
;context=default
;auth=rsa
I found the answer: One can disallow a codec within
each context of iax.conf.
Stig
- Original Message -
From:
Stig Hess
To: [EMAIL PROTECTED]
Sent: Tuesday, October 14, 2003 11:43
PM
Subject: Re: [Asterisk-Users] Iaxtel and
Voicepulse
Voicepulse _has_
Hello I am still having problems with IAXTELL and FWD configuration.
I get the following when I dial 17009965342 which is set as an example
to dial to FWD people. 1+700+99+ 5 digit number. I have placed X
where my passwords are.
my IAX.conf has
register = abatista:[EMAIL
From: Brian West [EMAIL PROTECTED]
register = abatista:[EMAIL PROTECTED]/114 doesn't work in iax.conf
also you are sending the full 917009965342
you should only send ${EXTEN:1} strip that 9 off.
OK done I forgot about the stripping the 9 off. Now I can call the numbers, But now
how do I get
-- Original Message --
From: Rich Adamson [EMAIL PROTECTED]
OK I got it working. Thank you Rich I used your examples and had to add the following
the sip.conf file. It did not work until I had the :5060 on it!
register = 65342:[EMAIL PROTECTED]:5060
okay, you no longer have to have [iaxtel] as the last entry. It was a
config error on x...
mark
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
so does that mean I can now have multiple iaxtel numbers?
Doug
On Thu, 2 Oct 2003 17:56:43 -0500 (CDT), Mark Spencer [EMAIL PROTECTED]
wrote:
okay, you no longer have to have [iaxtel] as the last entry. It was a
config error on x...
mark
___
I have tried for over a month off and on to get iaxtel for inbound to
work... and tonight after alot of troubleshooting we noticed this:
iaxtel inbound will use the last entry in your iax.conf to auth against.
So if [iaxtel] is at the top and say [voicepulse] at the bottom. An
inbound call will
PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Brian West
Sent: Tuesday, September 23, 2003 12:34 AM
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] iaxtel and iax.conf
I have tried for over a month off and on to get iaxtel for inbound to
work... and tonight after alot of troubleshooting we
Would you add this to
http://bugs.digium.com/bug_view_page.php?bug_id=296
please?
--Eric
On Tue, 2003-09-23 at 01:34, Brian West wrote:
I have tried for over a month off and on to get iaxtel for inbound to
work... and tonight after alot of troubleshooting we noticed this:
iaxtel inbound
: [Asterisk-Users]
iaxtel and iax.conf
Olá,
Você enviou uma mensagem para [EMAIL PROTECTED]
Para que sua mensagem seja encaminhada, por favor, clique aqui
Esta confirmação é
Well as you know I am very new to this Asterisk.
I just joined gnophone for a IAX phone number.
Got my number and password and I have confirmed it.
So not that I have this how can I put this into my
Asterisk server and make it get calls to my extension?
I have read most of the pass post and done
On Tue, 2003-09-23 at 13:09, Ariel Batista wrote:
Well as you know I am very new to this Asterisk.
I just joined gnophone for a IAX phone number.
Got my number and password and I have confirmed it.
So not that I have this how can I put this into my
Asterisk server and make it get calls to
Has anybody had a problem registering their IAXtel
account?
I just signed up for an account and followed the
documentation on iaxtel.org and my registration is
always rejected.
When I type iax show registry, I get the following
output:
Host UsernamePerceived
Has anybody had a problem registering their IAXtel
account?
My account is working fine using the following in iax.conf:
register = username:[EMAIL PROTECTED]
towards the bottom of the [general] section.
(I didn't test indial as of this morning to actually validate, but it
was working
I have that line in my iax.conf
--- Rich Adamson [EMAIL PROTECTED] wrote:
Has anybody had a problem registering their IAXtel
account?
My account is working fine using the following in
iax.conf:
register = username:[EMAIL PROTECTED]
towards the bottom of the [general] section.
I have that line in my iax.conf
Are you using the password they gave you when you signed up, or the new
password that you were forced to pick when you logged in for the first time?
I think the screen says something about it not changing your IAXTEL
password, just the one you log in to the web
I have inbound IAXtel calls working, but they come into the wrong
context.
I have a context= line in general above the register line in iax.conf
Does anyone have any ideas what might be happening?
--
Sample configs and more: http://www.fnords.org/~eric/asterisk/
BTEL Consulting
I'm new to the Asterisk software but have successfully set it up to make
and receive calls using FXO cards, voicemail transfer etc.
I can successfully call the Digium test IAX using the examples provided.
I have signed up for an IAX tel account and got a number.
The extensions have been set up
It's being replaced now with a new Dell. Details will be made available
soon.
Mark
On Wed, 9 Jul 2003, Paul Cheng wrote:
Hi,
Has anyone been able to place a call via IAXTEL toll-free termination
lately? I had it working at one time, but now it doesn't seem to work
anymore. www.iaxtel.com
Hi,
Has anyone been able to place a call via IAXTEL toll-free termination
lately? I had it working at one time, but now it doesn't seem to work
anymore. www.iaxtel.com also appears dead. Is this the server problem
again or is it my config? Haven't been able to find any references in
the list.
Hi
all,
Just a quick
one. Should I be able to call myself through IAXTEL using my 1700
number? I'm behind a NAT firewall and can call other numbers, I just want
to test incoming calls somehow to make sure I can accept them from
IAXTEL.
Regards,Jamie Carl
Email:
101 - 167 of 167 matches
Mail list logo
