Hello everybody.
I am trying to configure an Asterisk on Debian with the Billion ISDN card. I
am using mISDN.
But when I call on the CLI apears this:
-- Executing Dial("SIP/101-081805b8", "mISDN/1/943833473|45|tTwW") in new
stack
-- Called 1/943833473
P[ 1] empty_chan_in_stack: cannot empty
Hello everybody.
I have an other problem with mISDN.
The outgoing calls goes perfect, but the incoming no.
When people call in the CLI puts that:
*CLI> Jun 20 12:32:08 WARNING[2315]: chan_misdn.c:4920 chan_misdn_log:
Extension can never match, so disconnecting
this is my extensions.conf:
[gen
I am trying to use misdn insted of zaphfc to drive two billion isdn cards
zaphfc is ok, but the problem with cdr and the fact tha you always have to
wait the bristuffed version of asterisk took me to
try another way.
so I downloaded the misdn installation script from beronet for the last
version (
I have two HFC ISDN Cards, configured using mISDN on asterisk svn head 1.2
These two cards are connected to 2 ISDN Lines, receiving calls for 50
numbers.
Everything is OK on 75 % and bad on 25 %
When is bad, In /var/log/asterisk/full I see
May 26 09:55:28 WARNING[24410] chan_misdn.c: Extension
Hi,
I compiled and installed Asterisk and mISDN yesterday. It worked after
some errors. There's one HFC-Card which should be in nt-mode, and which
worked yeterday with my phone here, and there's another isdn-card with a
winbond chip i think, but i don't want to use this one at the moment.
We
On 6/13/07, Josu Lazkano <[EMAIL PROTECTED]> wrote:
>
> How can I saw the status of the ISDN???
>
...try "misdn show stacks" or "misdn show config". You can also increase
debug level in /etc/misdn-init.conf... Output will end up in
/var/log/asterisk/misdn.log
Cheers,
--
Ex Vito
_
You have only one extension in the [incoming] context and that is
's'. You probably need a different one -- the one the telco sends
you...
Ideas:
1. Try using a generic wildcard such as '_X.' instead of 's', then
check the CLI after incrementing verbosity to at least 3
(B
Thank yo very much, it works!
I had a 0 before the number, in misdn.conf ->natiolapreffix=0
2007/6/20, Ex Vitorino <[EMAIL PROTECTED]>:
You have only one extension in the [incoming] context and that is
's'. You probably need a different one -- the one the telco sends
you...
Ideas:
[EMAIL PROTECTED] wrote on 15.03.2006 14:37:27:
> I am trying to use misdn insted of zaphfc to drive two billion isdn
cards
> zaphfc is ok, but the problem with cdr and the fact tha you always have
to
> wait the bristuffed version of asterisk took me to
> try another way.
> so I downloaded the m
cc
15/03/2006 14.56 Subject
Re: [Asterisk-Users] misdn problem
m.com
> cc
>
> 15/03/2006 14.56 Subject
>Re: [Asterisk-Users] misdn
problem
>
> Please respond to
> Asterisk Users
> Mailing List -
> Non-Com
In your extension.conf, in the misdn context you defined in
/etc/asterisk/misdn.conf you have to add something linke the following line
[from-pstn]
exten => 0108680550,1,Dial(SIP/201)
If you don't want to have to write a string for each called extension,
you can put something like. Obviously S
cc
Subject
29/05/2006 10.47
Hi
As far as I know you shouldn't use hisax AND mISDN together. Especialy not
configured for the same card.
Try disabling the hisax driver in your kernel and recompile.
> hisax 442192 0
> crc_ccitt 1952 1 hisax
> isdn 119456 1 hisax
> slhc
Hi,
has anybody gotten the following message when trying to modprobe a isdn
adapter card driver?
mISDN_capi: no version for "capi_cmd2str" found: kernel tainted.
Anybody knows whether it's a problem or not and how to get rid of it?
Cheers,
Arik
__
15 matches
Mail list logo
