On Sun, Apr 24, 2005 at 06:45:15AM +0200, Remco Barende wrote:
When using bristuff I do get an error too if I don't load zaptel first but
not with the tdm driver.
I know that in my modprobe.conf it is specified that ztcfg should be run
after loading the module but why doesn't it?
I'm setting up asterisk and want everything to load on startup. The distro
I'm using is a RHEL4 rebuild (CentOS4).
Because the zaptel init script doesn't work I'm trying to set everything
up from rc.local. However asterisk fails to start with an error that the
zap device isn't loaded.
This is
You need this before wcfxs
/sbin/modprobe zaptel
Regards,
Chris
- Original Message -
From: Remco Barende [EMAIL PROTECTED]
To: Asterisk Users List asterisk-users@lists.digium.com
Sent: Saturday, April 23, 2005 12:55 PM
Subject: [Asterisk-Users] ztcfg doesn't do anything from /etc
Chris wrote:
You need this before wcfxs
/sbin/modprobe zaptel
*sigh*
zaptel will automatically load when the card driver loads.
modporbe will also run ztcfg after loading the card driver because (if
you ran make install) /etc/modules.conf tells it to do so.
--
Always do right. This will gratify
: [Asterisk-Users] ztcfg doesn't do anything from /etc/rc.d/rc.local
Chris wrote:
You need this before wcfxs
/sbin/modprobe zaptel
*sigh*
zaptel will automatically load when the card driver loads.
modporbe will also run ztcfg after loading the card driver because (if
you ran make
:15 PM
Subject: Re: [Asterisk-Users] ztcfg doesn't do anything from /etc/rc.d/rc.local
Chris wrote:
You need this before wcfxs
/sbin/modprobe zaptel
*sigh*
zaptel will automatically load when the card driver loads.
modporbe will also run ztcfg after loading the card driver because (if
you ran make