t
Kheraud (full of hope !!)
PS/ Sorry for my english, I am french
>From: Tzafrir Cohen <[EMAIL PROTECTED]>
>Reply-To: Asterisk Users Mailing List - Non-Commercial
>Discussion
>To: asterisk-users@lists.digium.com
>Subject: Re: [asterisk-users] [beginner] Problem of detecting ca
Asterisk Users Mailing List - Non-Commercial
>Discussion
>Subject: Re: [asterisk-users] [beginner] Problem of detecting call
>Date: Wed, 25 Jul 2007 14:25:19 +0300
>
>On Wed, Jul 25, 2007 at 10:51:54AM +, karim H wrote:
> > Hello,
> > First, thanks for your interest a
On Wed, Jul 25, 2007 at 10:51:54AM +, karim H wrote:
> Hello,
> First, thanks for your interest and your help.
> This lines are what I see when I start asterisk using: sudo asterisk -cvvv
> (I am under ubuntu feisty).
> When I call my telefonic line connected to my X100P card, there is nothing
List - Non-Commercial
>Discussion
>To: asterisk-users@lists.digium.com
>Subject: Re: [asterisk-users] [beginner] Problem of detecting call
>Date: Wed, 25 Jul 2007 13:05:50 +0300
>
>On Wed, Jul 25, 2007 at 09:32:43AM +, karim H wrote:
> > Hello,
> > I followed the advices, I
On Wed, Jul 25, 2007 at 09:32:43AM +, karim H wrote:
> Hello,
> I followed the advices, I add 'channel=>1' in my zapata.conf.
> But it still doesn't work, I rmmod wcfxo and rmmod zaptel. I add the module
> again with modprobe wcfxo.
> Then I launch asterisk : asterisk -cvvv. But il doesn't det
found.
[Jul 25 11:26:21] WARNING[9067]: res_smdi.c:722 load_module: No SMDI
interfaces are available to listen on, not starting SDMI listener.
Have you an idea of where the problem come from ??
Thanks a lot for your helps
kheraud
>From: Tzafrir Cohen <[EMAIL PROTECTED]>
>Reply-To
On Tue, Jul 24, 2007 at 03:44:29PM +, karim H wrote:
> Hello,
> I have some problem to start asterisk.
> First I have followed a lot of tutorials to complete correctly the install
> process. Now it works when I type zttool I can see when I am or not
> connected to the PSTN.
> But, I run aster
Hello,
I have some problem to start asterisk.
First I have followed a lot of tutorials to complete correctly the install
process. Now it works when I type zttool I can see when I am or not
connected to the PSTN.
But, I run asterisk with verbose and I can't see the call detection.
There is no