Nhadie wrote:
I disabled logging of NOTIFY on the CLI and it does not show anymore,
however CPU is still very high, latency as well goes up when it is
trying to poke my phone here, my phone(SPA942) also keeps on rebooting
is there a way to increase the time of sending the qualify? TIA
Hi,
I'm running asterisk realtime, i had prob when a user does not
unregister properly.
I tested with SPA942 and a PAP2, when phone is registered, i call using
the SPA using x-lite no problem, but when i unplugged the power, it does
not unregister properly, so asterisk think SPA942 is still
If a phone is unplugged, it's not likely to have time to send
notification of this to Asterisk before it powers off. There's nothing
you can add to your dialplan to overcome this, however you *can* set the
qualify parameter within sip.conf (or it's equivalent realtime table)
to overcome this.
Thank you for your reply sir. I tried setting qualify=yes my CPU spiked
to 113%
i continuously see this on my CLI
Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669
handle_response_peerpoke: Peer '118555' is now Reachable. (388ms / 2000ms)
[Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669
I disabled logging of NOTIFY on the CLI and it does not show anymore,
however CPU is still very high, latency as well goes up when it is
trying to poke my phone here, my phone(SPA942) also keeps on rebooting
is there a way to increase the time of sending the qualify? TIA
regards
nhadie
Nhadie
