Hello,
I'm looking for info about interconnecting asterisk to QSIG GF enabled PABX over
PRI .
Any information and pointers will be helpful.
The very first first question: does asterisk support QSIG BC and GF natively
i see that it is supported through CAPI enabled cards but what about support
th
Hi All. Somebody works with asterisk linked in ISDN PRI with protocol QSIG with some PABX as Siemens, Philips, etc. The applications as pickup between asterisk and the PABX function? The names in the display and the number of the origin also? Which features that they can be used between the equipm
Hi All. Somebody works with asterisk linked in ISDN PRI with protocol QSIG with some PABX as Siemens, Philips, etc. The applications as pickup between asterisk and the PABX function? The names in the display and the number of the origin also? Which features that they can be used between the equipme
Hi everybody,
Now we are looking to interconnect * with a Philips
PBX using an S0 interface and the QSIG protocol.
Looking in the wiki I see that's possible to define
the switchtype as qsig.
Somebody have had any experience integrating * with
QSIG?
Are QSIG fully integrated in *?
Rega
Well,
I've temporary connected asterisk to a Cisco E1 (which is configured to use
QSIG). Cisco debugs show:
Aug 18 13:15:05.973: %CONTROLLER-5-UPDOWN: Controller E1 1/1, changed state
to up
Aug 18 13:15:05.989: ISDN Se1/1:15: TX -> SABMEp c/r=1 sapi=0 tei=0
Aug 18 13:15:06.330: ISDN Se1/1:15: RX
On Tuesday 17 August 2004 21:00, aleph lammim wrote:
> I need to make asterisk connect to another device over a pri using QSIG
> signalling (master/slave). Is this feasible and has it been done before?
I am planning on doing something similar but with a Nortel MICS... apparently
there is rudimen
Guys,
I need to make asterisk connect to another device over a pri using QSIG
signalling (master/slave). Is this feasible and has it been done before?
Thank you!
al.
_
Get ready for school! Find articles, homework help and more in th
