Thanks Guys,
I managed to get it working the problem was NAT;
in the sip.conf
[general]
nat=yes
however in the SIPMAC.cnf there was nothing about NAT.
It took me a while to spot it since both asterisk and phone were in
same network and I did not think about NAT.
Solutions:
1) add in sip.conf
Hello Mark,
I managed to make it work - see my previous post
Since you have those phones - does:
voip_control_port: 5060
start_media_port: 1
end_media_port: 10050
works in your case? I tried to put those in SIPDefault but looks like
the phone ignores those and always says:
start media
Are there any other phones registered, or is it just this phone that is
having issues? The first thing that I see is the qualify=200 line, and I
have not had good experience with Cisco devices and any qualify setting. I
would try leaving that out. I also have double quotes around the line1_*
Dear All,
I'm trying to configure my new phone Cisco 7960 to work with asterisk.
I followed
http://www.asteriskguru.com/tutorials/cisco_7960_ip_phone_configuration.html
and I got into the point where I can see on the the display line indication
showing
55 phone icon with x so it looks like the
