On Thu, 13 Mar 2008, Doug Lytle wrote:
Gordon Henderson wrote:
Then no amount of Set(CALLERID(name)=somethin) will work. Even if I
explicitly do a Set before the dial, it seems to get ignored.
Trying doing that while using:
SetCallerPres(allowed)
Within your dial plan
Well there you go.
Thanks all :)
Appreciate it.
On Feb 1, 2008 12:04 PM, Ex Vito [EMAIL PROTECTED] wrote:
I've struggled with this recently. In short:
- Observed behaviour is expected as of asterisk 1.2 and later,
as previously described by Mojo
- If you want to get the caller id for the channel
Trust me, I don't WANT you to look at my code, it's butt-ugly! lol, lust
kidding... -- but at http://www.astsee.com/ you can download the source
code to my AstSee project -- it may provide some insight into what needs
to be (or CAN be) gleaned from asterisk. I struggled with all this a
year
The snippet is asterisk telling you I'm just letting you know that the
correct caller id for Channel: SIP/103-098500d8 is CallerID: 103
This is absolutely correct, it's just not a piece of information you
expected to be receiving at that point.
You probably also received a packet like that
I've struggled with this recently. In short:
- Observed behaviour is expected as of asterisk 1.2 and later,
as previously described by Mojo
- If you want to get the caller id for the channel calling (dialling)
into that channel for that specific Newstate: Ringing event, you
Hi everyone,
My manager interface seems to be producing wrong CallerIDs when
internal extensions call each other. Can anyone see anything wrong in
the configuration snippets pasted below? The following instance has
extension 101 call 103. The phone does show the right caller ID, but
notice that
remove the brackets around
(Devraj Mukherjee 101)
Regards
Kev
Devraj Mukherjee wrote:
Hi everyone,
My manager interface seems to be producing wrong CallerIDs when
internal extensions call each other. Can anyone see anything wrong in
the configuration snippets pasted below? The following
Hello.
I have a little problem with the callerid shown to the callee if he recieves
an atxfer (*2) call. The display of the calees phone is showing (s) and thats
not what i want. I wanna see the callerid from the user who is transfering
the call. Example:
12345 calls 123, 123 transfers
I am having an issue with the CallerID Number not being passed to my
phone in the SIP packet. The CallerID Name is passed just fine and
displayed on the phone with no issue. I have done a NoOp() in my
extension.conf and successfully seen both the CallerID name and number
correctly. So that leads
in sip.conf under the definition for the sip user add
callerid=whatever
- Original Message -
From: Lutgring, Sam
To: Asterisk Users Mailing List - Non-Commercial Discussion
Sent: Tuesday, January 08, 2008 4:37 PM
Subject: [asterisk-users] CallerID Number incorrect in SIP
When receiving inbound calls from a Vonage Softphone extension, I'm unable
to view/maniupulate calledid data. but it shows up in the CDR records and on
called handsets.. any ideas?
exten = asda,n,NoOp(callerID is ${CALLERID})
exten = asda,n,NoOp(CallerID is ${CALLERIDNAME})
exten =
try ${CALLERID(all)}
Peter Kranz wrote:
When receiving inbound calls from a Vonage Softphone extension, I'm unable
to view/maniupulate calledid data. but it shows up in the CDR records and on
called handsets.. any ideas?
exten = asda,n,NoOp(callerID is ${CALLERID})
exten =
Those variables were deprecated in 1.2 and removed in 1.4. You should
read both the 1.2 and 1.4 UPGRADE.txt files. Also read README.variables.
Peter Kranz wrote:
When receiving inbound calls from a Vonage Softphone extension, I'm unable
to view/maniupulate calledid data. but it shows up in
Peter Kranz wrote:
When receiving inbound calls from a Vonage Softphone extension, I'm unable
to view/maniupulate calledid data. but it shows up in the CDR records and on
called handsets.. any ideas?
exten = asda,n,NoOp(callerID is ${CALLERID})
exten = asda,n,NoOp(CallerID is
Hi everyone,
I have been dealing with a certain issue with a particular customer site
for months now. The problem occurs when there is an error with caller
id as shown in the following:
WARNING[16036]: chan_zap.c:6309 ss_thread: CallerID returned with error
on channel 'Zap/3-1'
When this
Am Mittwoch, den 15.08.2007, 10:14 -0400 schrieb Lee Jenkins:
Hi everyone,
I have been dealing with a certain issue with a particular customer site
for months now. The problem occurs when there is an error with caller
id as shown in the following:
WARNING[16036]: chan_zap.c:6309
Anselm Martin Hoffmeister wrote:
Am Mittwoch, den 15.08.2007, 10:14 -0400 schrieb Lee Jenkins:
Hi everyone,
I have been dealing with a certain issue with a particular customer site
for months now. The problem occurs when there is an error with caller
id as shown in the following:
Thanks for the reply. Yep, the telco is providing the callerid since
it's getting into the asterisk call database just fine, in all cases.
It appears that the telco has changed the cadence for the distinctive
ring again. I modified the dring contexts to handle a 0,0,0 dring and
now callerid
[EMAIL PROTECTED] wrote:
The other context, the one with distinctive ring that's not passing
caller id, actually does a little more:
[main-open]
exten = s,1,Answer
exten = s,n,Wait(3)
exten = s,n,Background(opengreeting)
exten = s,n,Dial(SIP/ht1SIP/gxp3,20)
But even if I remove those
[EMAIL PROTECTED] wrote:
Thanks for the reply. Unfortunately that didn't work. What's confusing
is that for the line without any distinctive ring that works correctly
with callerid, the only thing it does is dial the phones, so here's the
entire context:
[add-incoming]
exten =
At 08:47 PM 7/23/2007, you wrote:
For both lines I can definitely see the callerid being reported correctly
in /var/log/asterisk/cdr-custom/Master.csv. It's just not getting passed
through to the sip clients for the incoming line with distinctive ring.
For those lines it shows up as asterisk.
Thanks for the reply. Unfortunately that didn't work. What's confusing
is that for the line without any distinctive ring that works correctly
with callerid, the only thing it does is dial the phones, so here's the
entire context:
[add-incoming]
exten = s,1,Dial(SIP/ht1SIP/ht2SIP/gxp1,20)
Hello,
I'm having some trouble getting callerid to work through a distinctive ring
line. Specifically, I'm having a problem getting the callerid to pass from
an ATT POTS line connected to a TDM400P to SIP phones, both hard phones
and soft phones.
What leads me to believe that it's a problem
Community,
We have released a new patch por mfcr2 chan_unicall
Regarding CID presentation via SetCallerPres() in Asterisk for R2
This files involves legal regulations impact and general support
To dynamic adjustment in the ANI presentation to the user.
They proved to be functional in a telco
Not that I like answering my own emails, but I hate when I come across
the same problem as someone else and there isn't an answer there.
Anyway, the problem turned out to be in my sip.conf. The variable
'fromuser' was being set for all sip friends. Each friend's fromuser
variable was being set
All,
I have run into some CallerID issues. It seems to have happened as a
result of just moving my config from 1.2.12 to 1.4.4 (although I am not
sure of this). Therefore I am sure its just a misconfiguration
somewhere, I just don't know where.
I have throughout the office either Cisco
Hi,
I am using asterisk 1.4 with Digium TDM22B card. My system is running well
except CALLERID. I have tried all options for cidsignalling, cidstart but no
luck.
Btw, I am living in Malaysia. From google web site, I found some one having
the same problem with new version of asterisk but not in
d'origine-
De : [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] De la part de aslay-pinwee
Envoyé : vendredi 18 mai 2007 14:23
À : asterisk-users@lists.digium.com
Objet : [asterisk-users] CallerID not detected by TDM22B
Hi,
I am using asterisk 1.4 with Digium TDM22B card. My system is running well
not sure what to set for my country TELCO.
ASLAY
- Original Message -
From: [EMAIL PROTECTED]
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Sent: Friday, May 18, 2007 8:47 PM
Subject: RE : [asterisk-users] CallerID not detected by TDM22B
Hello Aslay
Alex,
This would fix only one of 2 problems. By setting the CDR source
variables, I'm still left with the monitor variable and any others that
may come up in the future. There was another email saying I should just
set the monitor file name as well. Since I'm using auto_mon, I'm not
sure that
Hi,
in my dial plan I've configured two trunks to make outbound calls (one for
national calls and other international). I want to allow only 2-3 extension
to make use of my international trunk to make outbound calls so I want some
kind of auth. based on their callerid . Please guide.
thanks
From: Arun Kumar [EMAIL PROTECTED]
Date: Fri, 20 Apr 2007 17:58:10 +0400
Hi,
in my dial plan I've configured two trunks to make outbound calls (one for
national calls and other international). I want to allow only 2-3 extension
to make use of my international trunk to make outbound calls so I
Hello all,
I currently have all outgoing calls set to mask the caller id so it will
always appear to be coming from our main number. The problem I'm having
though, is with both the call detail in mysql and with the automon
(recording) feature. It shows the originating number as the number I
On Thu, 19 Apr 2007, Rob Schall said something to this effect:
Hello all,
I currently have all outgoing calls set to mask the caller id so it will
always appear to be coming from our main number. The problem I'm having
though, is with both the call detail in mysql and with the automon
Hello Rob,
try to set che MONITOR_FILENAME as something containing the internal
extension befor emasking the CID
hope it helps
Edoardo
Rob Schall ha scritto:
Hello all,
I currently have all outgoing calls set to mask the caller id so it will
always appear to be coming from our main
Thanks for the response Ola. Turned out, I needed to add a Wait(1). That
extra second gave the provider of the PRI time to send the callerid info
as well, and then it could be sent correctly to the phones. :)
Rob
Ola Lidholm wrote:
On 29 mar 2007, at 23.01, Rob Schall wrote:
We have the
On 29 mar 2007, at 23.01, Rob Schall wrote:
We have the caller id with name option enabled with our provider,
however, our polycom 501 phones will only display the number of the
incoming call. Is there a way to see the callerid name from the cli
when
the call is coming in (like a print in
That did it. I didn't realize it needed that extra minute to wait for
the info to come in. I figured if it came in later, it would just send
to the phone the new/updated info when it got it. Guess not. :) Now, if
we could only get transfer call caller id working in asterisk and the
polycom 501,
We have the caller id with name option enabled with our provider,
however, our polycom 501 phones will only display the number of the
incoming call. Is there a way to see the callerid name from the cli when
the call is coming in (like a print in the dial plan)? I'm not sure if
the problem is with
Rob Schall wrote:
We have the caller id with name option enabled with our provider,
however, our polycom 501 phones will only display the number of the
incoming call. Is there a way to see the callerid name from the cli when
the call is coming in (like a print in the dial plan)?
Rob Schall wrote:
We have the caller id with name option enabled with our provider,
however, our polycom 501 phones will only display the number of the
incoming call. Is there a way to see the callerid name from the cli when
the call is coming in (like a print in the dial plan)? I'm not sure if
Hugh L. Johnson wrote:
I have a Dish 301 receiver that will not display CallerID when connected
to FXS module on TDM400. Uniden phone connected to the same FXS module
does display CallerID.
When Dish 301 receiver is connected to IAXy CallerID is displayed
properly.
Any suggestions on getting
I have a Dish 301 receiver that will not display CallerID when connected
to FXS module on TDM400. Uniden phone connected to the same FXS module
does display CallerID.
When Dish 301 receiver is connected to IAXy CallerID is displayed
properly.
Any suggestions on getting the CallerID to display
Hi,
An incoming call is redirected to another number by our asterisk
server. In the incoming call the caller name is present but when
redirect the call, the end receiver is not able to see the callerid
name. The caller id number is visible.
our related changes to extensions conf is below.
Shivram u wrote:
Hi,
An incoming call is redirected to another number by our asterisk
server. In the incoming call the caller name is present but when
redirect the call, the end receiver is not able to see the callerid
name. The caller id number is visible.
If you're calling PSTN, caller id
Hi guys. This is my 1st post here (after much reading). I have a test
asterisk system setup using X-Lite Soft Phones, and the issue I am
running into is that caller id shows up as asterisk on all incoming
calls and on all local to local calls (internal). I have showcallerid,
etc.
Am Mittwoch, den 13.12.2006, 15:03 + schrieb
[EMAIL PROTECTED]:
Hi guys. This is my 1st post here (after much reading). I have a test
asterisk system setup using X-Lite Soft Phones, and the issue I am
running into is that caller id shows up as asterisk on all incoming
calls and on
Anselm Martin Hoffmeister wrote:
Am Mittwoch, den 13.12.2006, 15:03 + schrieb
[EMAIL PROTECTED]:
Hi guys. This is my 1st post here (after much reading). I have a test
asterisk system setup using X-Lite Soft Phones, and the issue I am
running into is that caller id shows up as asterisk
Hi everybody...
I have a similar problem... I don't get the ID of the person that i
called on my phone... Does anyone know something about this problem?
greets,
Sven
2006/12/13, Bruce Ferrell [EMAIL PROTECTED]:
Anselm Martin Hoffmeister wrote:
Am Mittwoch, den 13.12.2006, 15:03 + schrieb
Am Mittwoch, den 13.12.2006, 20:56 +0100 schrieb Sven Beisiegel:
Hi everybody...
I have a similar problem... I don't get the ID of the person that i
called on my phone... Does anyone know something about this problem?
greets,
Sven
Well, this sounds as specific as my computer is
I'm having trouble with Cisco 7960 and Linksys SPA-942 SIP phones not
displaying the Caller-ID number. The Caller-ID name is displayed, but
not the number. Instead, the phones always display the value that's set
in the fromuser= parameter in sip.conf. If fromuser= is not set, then
the
Hi,From http://thread.gmane.org/gmane.comp.telephony.pbx.asterisk.user/148565/focus=149455, you can read that :- SIP allows CallerID to be changed at the point when 2 separate calls are bridged to one ...
- May 2006 trunk version of Asterisk did not support this behaviour at that time.Is it still
the configuration is this :
NT
PRI
TD405P TE
A
-- B
(Asterisk)
A make a call to
B.
A can display the ID
(caller ID , example John) of B ?
these information
are exchanged in the call progress ?
B can change the
called number and communicate this change to A whene the
6 1:14 AMTo: AsteriskUsers Mailing List - Non-Commercial DiscussionSubject: RE:[asterisk-users] CallerID is not displaying for my incomingcalls Hi Rushowr,Thank you for response.Here I am givingmy config files and error message. Please see it.zaptel.conf contents:loadzone =usdefau
: [asterisk-users] CallerID is not displaying
for my incoming calls
Hi,As you said, I have changed my configurations. But,
callerid is not displaying. What I have to do? Please tell
me.ThanksRegards,Chandra.Rich Adamson
[EMAIL PROTECTED] wrote:
Crazy
Boy wrote: Hi Friends, We
iling List - Non-CommercialDiscussionSubject: Re: [asterisk-users] CallerID is not displayingfor my incoming calls Hi,As you said, I have changed my configurations. But,callerid is not displaying. What I have to do? Please tellme.ThanksRegards,Chandra.Rich Adamson
[EMAIL PROTEC
:[EMAIL PROTECTED] On Behalf Of Crazy
BoySent: Friday, August 18, 2006 1:14 AMTo: Asterisk
Users Mailing List - Non-Commercial DiscussionSubject: RE:
[asterisk-users] CallerID is not displaying for my incoming
calls
Hi Rushowr,Thank you for response.Here I am giving
my config files
Hi,As you said, I have tested. But, still callerid is not displaying. On the console, Asterisk is giving below error: *CLI Aug 14 15:09:58 ERROR[27056]: callerid.c:276 callerid_feed: fsk_serie made mylen 0 (-8) Aug 14 15:09:58 WARNING[27056]: chan_zap.c:6087 ss_thread: CallerID feed failed:
Hi,As you said, I have changed my configurations. But, callerid is not displaying. What I have to do? Please tell me.ThanksRegards,Chandra.Rich Adamson [EMAIL PROTECTED] wrote: Crazy Boy wrote: Hi Friends, We have installed Asterisk with Digium 04B card (4 FXO ports). Now, I have connected my
On Wed, 2006-08-16 at 00:22 -0700, Crazy Boy wrote:
extensions.conf file contents:
[incoming]
exten = s,1,Answer
exten = s,2,SetMusicOnHold(default)
exten = s,3,DigitTimeout,5
exten = s,4,ResponseTimeout,10
exten =
Hi Friends,We have installed Asterisk with Digium 04B card (4 FXO ports). Now, I have connected my PSTN line directly to first port. I am making outgoing calls and receiving incoming calls successfully through my Asterisk. The problem is: When I am receiving a call from outside (PSTN), I am not
Crazy Boy wrote:
Hi Friends,
We have installed Asterisk with Digium 04B card (4 FXO ports). Now, I
have connected my PSTN line directly to first port. I am making outgoing
calls and receiving incoming calls successfully through my Asterisk. The
problem is: When I am receiving a call from
At 02:14 AM 8/14/2006, you wrote:
We have installed Asterisk with Digium 04B card (4 FXO ports). Now,
I have connected my PSTN line directly to first port. I am making
outgoing calls and receiving incoming calls successfully through my
Asterisk. The problem is: When I am receiving a call from
On 7/10/06, Ryder Brook [EMAIL PROTECTED] wrote:
and learning a lot and the stupid mistake was that the telephone that I was
calling from has caller id blocked. Well, the only satisfaction is that I
You should always have a way to test with a call that you know is
working, such as a cell phone
On 7/9/06, Ryder Brook [EMAIL PROTECTED] wrote:
I have 2 POTs line coming into Asterisk. We have callerid feature from
Verizon on one of the lines.
What interface are the lines connected to?
I am not able to track any CallerID coming in, in the log. I am pretty green
with asterisk, and it's
I have 2 POTs line coming into Asterisk. We have callerid feature from
Verizon on one of the lines.
I am not able to track any CallerID coming in, in the log. I am pretty
green with asterisk, and it's not clear if I have to activate for
CallerID in the dialplan. The voicemail keeps saying
Thanks to everyone.I had everything right except that rxgain and txgain were set to 0.I am actually embarassed to say that I spent most of Saturday getting lost and learning a lot and the stupid mistake was that the telephone that I was calling from has caller id blocked. Well, the only
Hello
I had an Asterisk installation working fine for CallerID on BT analog lines
using a Digium analog 4 port card. However, user switched to TalkTalk
without telling me and CallerID no longer works. However, if you connect a
UK CallerID capable phone into one of these analog lines directly
On Sat, Jul 08, 2006 at 10:59:49AM +0100, Angus Comber wrote:
I had an Asterisk installation working fine for CallerID on BT analog lines
using a Digium analog 4 port card. However, user switched to TalkTalk
without telling me and CallerID no longer works. However, if you connect a
UK
Steve Kennedy wrote:
On Sat, Jul 08, 2006 at 10:59:49AM +0100, Angus Comber wrote:
I had an Asterisk installation working fine for CallerID on BT analog lines
using a Digium analog 4 port card. However, user switched to TalkTalk
without telling me and CallerID no longer works. However,
, 2006 12:37 PM
Subject: Re: [asterisk-users] CallerID in UK on TalkTalk - different to BT?
On Sat, Jul 08, 2006 at 10:59:49AM +0100, Angus Comber wrote:
I had an Asterisk installation working fine for CallerID on BT analog
lines
using a Digium analog 4 port card. However, user switched
On Sat, Jul 08, 2006 at 01:55:00PM +0100, Thomas Kenyon wrote:
[snip]
I thought that the line would now go through talktalk (It is an LLU
service after all).
FWIW, the same thing happened to me with a line that moved to bulldog.
In the UK BT still own 85% of all copper into premises. Ofcom
Hope someone call help me .I have 2 POTs line coming into Asterisk. We have callerid feature from Verizon on one of the lines.I am not able to track any CallerID coming in, in the log. I am pretty green with asterisk, and it's not clear if I have to activate for CallerID in the dialplan. The
and what TDM card are you using and what does your zapata.conf file look like.
On 7/8/06, Ryder Brook [EMAIL PROTECTED] wrote:
Hope someone call help me .
I have 2 POTs line coming into Asterisk. We have callerid feature from
Verizon on one of the lines.
I am not able to track any CallerID
Hi all,
i use asterisk 1.2.7 and i have a problem with callerid.
i use sangoma a200 cards. one fxo one fxs module
i have these scenario
- bob calls adam, where bob calls into my asterisk and adam picks up
from my asterisk
- bob and adam are speaking to each other
- meanwhile eve calls adam,
We're using [EMAIL PROTECTED] 2.8 (same thing occurs with
earlier versions). We have it set up so that if we don't answer our
internal SIP phones it does "follow me" to our cell phones. When Asterisk
forwards the calls to our cell phones, the Caller ID shows our outbound number,
not the
If you are using POTS then the answer is no.
If you are using VoIP then your provider has to support it.
If you are using a PRI then your provider has to support it.
I believe for anything else (RBS, etc.) the answer is no.
On 5/30/06, George A. Roberts IV [EMAIL PROTECTED] wrote:
We're using
Ok, I must be really stupid here -
I'm playing with ael and svn trunk.
given the following in ael:
context isdn10 {
444601 = {
Answer();
NoOp(${CALLERIDNUM});
Hangup();
};
};
isdn10 is the incoming isdn context.
why do I get
On Wednesday 31 May 2006 09:08, Julian Lyndon-Smith wrote:
Ok, I must be really stupid here -
I'm playing with ael and svn trunk.
given the following in ael:
context isdn10 {
444601 = {
Answer();
NoOp(${CALLERIDNUM});
Hangup();
Oh man, I feel such an idiot. I knew that. Just chose to forget it. ;(
Many thanks for reminding me that I am a fool !
Thanks.
Julian.
Hadley Rich wrote:
On Wednesday 31 May 2006 09:08, Julian Lyndon-Smith wrote:
Ok, I must be really stupid here -
I'm playing with ael and svn trunk.
given
I'm having a problem with my dialplan. I'm trying to rewrite the CallerID Name variable so that when a call comes in, it shows what queue the call is going to:exten = 1234,n,Set(CALLERID(name)=Queue1)This works fine for most calls, but when I call from my cell phone my name appears and it doesn't
Discussion
Subject: Re: [Asterisk-Users] CallerID
It appears that the PBX sitting between Asterisk and your provider is
not passing on the calling pres flags.
On 5/23/06, Lee Archer [EMAIL PROTECTED] wrote:
I have a problem with BT in the UK. Using setcallerpres I can change
the number shown
using a TE110P card.
Regards
Lee
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of C F
Sent: 23 May 2006 17:56
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] CallerID
It appears that the PBX sitting between
Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of C F
Sent: 23 May 2006 15:05
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] CallerID
You should set the presentation flags to private.
http://www.voip-info.org/wiki
Here in the UK on pri, setting the callerid to 0, withholds it.
I am trying to set CIDNum to nothing, but my outgoing PRI controlled by
another PBX seems to fill in something when asterisk does not.. If I
set a number either in the sip channel for the phone, or from
extensions.con, it is
Greg Oliver wrote:
I am trying to set CIDNum to nothing, but my outgoing PRI controlled by
another PBX seems to fill in something when asterisk does not.. If I
set a number either in the sip channel for the phone, or from
extensions.con, it is realized.. If I try to leave them blank, or even
On Tue, 2006-05-23 at 09:32 +0100, Mark Ackroyd wrote:
Here in the UK on pri, setting the callerid to 0, withholds it.
I am trying to set CIDNum to nothing, but my outgoing PRI controlled by
another PBX seems to fill in something when asterisk does not.. If I
set a number either in the
On Tue, 2006-05-23 at 06:27 -0400, Steve Totaro wrote:
Greg Oliver wrote:
I am trying to set CIDNum to nothing, but my outgoing PRI controlled by
another PBX seems to fill in something when asterisk does not.. If I
set a number either in the sip channel for the phone, or from
You should set the presentation flags to private.
http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+CallingPres
On 5/23/06, Greg Oliver [EMAIL PROTECTED] wrote:
I am trying to set CIDNum to nothing, but my outgoing PRI controlled by
another PBX seems to fill in something when asterisk
: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of C F
Sent: 23 May 2006 15:05
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] CallerID
You should set the presentation flags to private.
http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd
Discussion
Subject: Re: [Asterisk-Users] CallerID
You should set the presentation flags to private.
http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+CallingPres
On 5/23/06, Greg Oliver [EMAIL PROTECTED] wrote:
I am trying to set CIDNum to nothing, but my outgoing PRI controlled
by another PBX
I am trying to set CIDNum to nothing, but my outgoing PRI controlled by
another PBX seems to fill in something when asterisk does not.. If I
set a number either in the sip channel for the phone, or from
extensions.con, it is realized.. If I try to leave them blank, or even
Not Defined, the main
Steve Davies wrote:
In the cases previously mentioned, the user is doing an attended
transfer using the handset features, and not Asterisk. I do not know
whether SIP even allows the Caller ID to be changed at the point when
two separate calls are bridged to one...
It does, but Asterisk does
On 5/16/06, Avi Miller [EMAIL PROTECTED] wrote:
Michael J. Tubby B.Sc (Hons) G8TIC wrote:
call then transfers it on to another extension transferee (recipeient)
sees the Caller*ID
This behaviour changed in Asterisk 1.2 -- add o to your Dial options
and Asterisk will retain the original Caller
of the 7960G phone...?
Mike
- Original Message -
From: Steve Davies [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Wednesday, May 10, 2006 10:52 AM
Subject: Re: [Asterisk-Users] CallerID retain on internal transfer
, May 10, 2006 10:52 AM
Subject: Re: [Asterisk-Users] CallerID retain on internal transfer
On 5/10/06, Joseph Rothstein [EMAIL PROTECTED] wrote:
From what I have tested, using cisco phones and 1.2.5, the original
callerID
is not kept when making a transfer.
Any other ideas?
We use SPA, snom
Michael J. Tubby B.Sc (Hons) G8TIC wrote:
call then transfers it on to another extension transferee (recipeient)
sees the Caller*ID
This behaviour changed in Asterisk 1.2 -- add o to your Dial options
and Asterisk will retain the original Caller ID on transfer.
--
National Manager - Special
From what I have tested, using cisco phones and 1.2.5, the original callerID
is not kept when making a transfer.
Any other ideas?
Joe
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update
On 5/10/06, Joseph Rothstein [EMAIL PROTECTED] wrote:
From what I have tested, using cisco phones and 1.2.5, the original callerID
is not kept when making a transfer.
Any other ideas?
We use SPA, snom and aastra phones, and I had assumed that this was a
limitation of the SIP protocol. I would
I was just looking through the Wiki for some info on how to retain the
original caller's callerid when make transfers to internal extensions, and I
came across the parameter below:
useincomingcalleridonzaptransfer=yes
There is nothing in the zapata.conf file from vers. 1.2.7 so I am wondering
if
201 - 300 of 755 matches
Mail list logo