Re: [asterisk-users] Cisco 7970 with skinny on * 1.4.1

my simple, but working config for 7920... Dial(Skinny/[EMAIL PROTECTED]) [general] bindaddr=193.179.38.20; Address to bind to bindport=2000 ; Port to bind to, default tcp/2000 dateformat=D-M-Y; M,D,Y in any order (5 chars max) keepalive=30 disallow=all allow=alaw [PJ]

Re: [asterisk-users] Cisco 7970 with skinny on * 1.4.1

I was able to register to * 1.4.1 via skinny...and it showed up on the lines and devices show output.. On the phone, however, no lines were displayed nor could it phone out or receive any calls... Anyone able to share some snippets of their skinny.conf? I just used the examples and modified the

Re: [asterisk-users] Cisco 7970 with skinny on * 1.4.1

If you have 7970 right configured to point to asterisk server, you should be able to see some skinny debug on console, or look what report "skinny show devices" I haven't any 7970, so can't help so much, I'm using only 7920 wifi phone with chan_skinny and 1.4trunk, it's usable, basic functionali

Re: [asterisk-users] Cisco 7970 with skinny on * 1.4.1

Richard Klingler wrote: Hmm..interestingly no one answered if chan_skinny works with 7970G on * 1.4.x (o; I know that CIsco phones are bad with NAT and SIP...old story (o; THat's why I use local Cisco phones with SIP and local * which then connects to outside * vis IAX... I've a 7912G running

Re: [asterisk-users] Cisco 7970 with skinny on * 1.4.1

Hmm..interestingly no one answered if chan_skinny works with 7970G on * 1.4.x (o; I know that CIsco phones are bad with NAT and SIP...old story (o; THat's why I use local Cisco phones with SIP and local * which then connects to outside * vis IAX... cheers rick Hermann Wecke schrieb: Richard

Re: [asterisk-users] Cisco 7970 with skinny on * 1.4.1

Bill Hackensack schrieb: On 3/21/07, *Richard Klingler* <[EMAIL PROTECTED] > wrote: As chan_sccp is pretty much dead, doesn't compile on FBSD anyway and isn't supported on * 1.4.x I tried going with chan_skinny... chan_sccp is far from dead and it works with

Re: [asterisk-users] Cisco 7970 with skinny on * 1.4.1

last chan_sccp was released a year ago, Sergio, main developer, gone away minimal activity in forum, chan_sccp.org, unoficial chan_sccp site, is for sale this are reasons, why I also considering chan_sccp as death project. Bill Hackensack wrote: chan_sccp is far from dead and it works with

Re: [asterisk-users] Cisco 7970 with skinny on * 1.4.1

On 3/21/07, Richard Klingler <[EMAIL PROTECTED]> wrote: As chan_sccp is pretty much dead, doesn't compile on FBSD anyway and isn't supported on * 1.4.x I tried going with chan_skinny... chan_sccp is far from dead and it works with 1.4. more fud being spread... ___

Re: [asterisk-users] Cisco 7970 with skinny on * 1.4.1

Richard Klingler wrote: Has any1 got their 7970 to work with * 1.4.x ? Why don't you use 7970 with SIP firmware? I'm running SIP 8.0.4SR2 without problems (Asterisk 1.2.16). Just remember that 7970 only will register if your Asterisk is at the same network - no NAT between them - check http://

[asterisk-users] Cisco 7970 with skinny on * 1.4.1

Evnin' (o; As chan_sccp is pretty much dead, doesn't compile on FBSD anyway and isn't supported on * 1.4.x I tried going with chan_skinny... The Cisco 7970 registers and is being acknowledged by * but that's it... I see no lines on the 7970 display configured and it is not reachable or it can'