when i m running "genzaptelconf"
[EMAIL PROTECTED] ~]# genzaptelconf
STOPPING ASTERISK
STOPPING FOP SERVER
safe_opserver: no process killed
FOP Server Stopped
Generating '/etc/zaptel.conf'
Generating '/etc/asterisk/zapata-auto.conf'
Unloading zaptel hardware drivers:
Unloading rxt1: ERROR: Mo
"genzaptelconf" you mean?
2007/2/22, Paul Hales <[EMAIL PROTECTED]>:
genzaptel is _not_ your friend when setting up E1.
PaulH
On Thu, 2007-02-22 at 00:46 +, younss azzayani wrote:
> this is my zaptel.conf::
> [EMAIL PROTECTED] ~]# cat /etc/zaptel.conf
> # Autogenerated by /usr/local/sbin
On Thu, Feb 22, 2007 at 11:58:06AM +1100, Paul Hales wrote:
>
> genzaptel is _not_ your friend when setting up E1.
/usr/local/sbin/genzaptelconf that comes with trixbox: no. It is very
old copy of genzaptelconf.
try xpp/utils/genzaptelconf for something that has supported E1 for
quite a while (
genzaptel is _not_ your friend when setting up E1.
PaulH
On Thu, 2007-02-22 at 00:46 +, younss azzayani wrote:
> this is my zaptel.conf::
> [EMAIL PROTECTED] ~]# cat /etc/zaptel.conf
> # Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
> # Zaptel Configuration File
> #
> #
this is my zaptel.conf::
[EMAIL PROTECTED] ~]# cat /etc/zaptel.conf
# Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
# It must be in the module loading order
# Span 1: WCT1/0 "Digium Wild
On Wed, 2007-02-21 at 16:14 +, younss azzayani wrote:
> Hi,
> thank You,
> when i run "zttool i get
>
> Alarms Span â
>â UNCONFIGUREDDigium Wildcard TE110P T1/E1 Card 0 â â
>
Hi,
thank You,
when i run "zttool i get
Alarms Span â
â UNCONFIGUREDDigium Wildcard TE110P T1/E1 Card 0 â â
â UNCONFIGUREDZTDUMMY/1 1 â
> Hello,
> i've installed trixbox with TE110P & TDM400B, but no led is ON in the
> TE110P, i don't know why even if the 4 leds of My TDM are greens
> any explaination
>
> Thank You
No LEDs on TE110P (and similar cards) can sometimes mean that the Zaptel
driver isn't running. Can you run zttool a
Hello,
i've installed trixbox with TE110P & TDM400B, but no led is ON in the
TE110P, i don't know why even if the 4 leds of My TDM are greens
any explaination
Thank You
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing l
light
--
Sincerely,
Elman Efendiyev
PROTECH INC.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of rivoli.durand
Sent: Friday, 16 February, 2007 15:52
To: asterisk-users
Subject: [asterisk-users] Digium TE110P
Hi
I am currently installing a TE110P.
SUSE10
Again, you need a E1/T1 link for that card and you need to set out the jumper
either for T1 or E1
link. Since you are in Europe, the jumper settings should be for E1.
This card is different from the TDM400P family.
Regards,
Demuel
> Hi Demuel
>
> Thanks, it definitely helps a lot.
>
> I forgot
Hi Demuel
Thanks, it definitely helps a lot.
I forgot to mention that I worked out the jumper thing.
So, you give the explanation that is : as there is no E1/T1
connected to the card, the card is somewhat saying that it is
waiting for a link.
In this regard, it behaves differently from an analo
Hello,
Hmm, you are like me eons ago doing stuff on TE110P. Anyway, consider the
following questions:
1. Is the jumper for that card set to E1 or T1?
2. Do you have an E1 or T1 link there?
When you have an E1/T1 line there at your disposal, insert it in the slot. In
either case, the
green lig
Hi
I am currently installing a TE110P.
SUSE10
The zttest test result is : average 99.9991%.
My server : processor Intel® Celeron® D 330, 2.66 GHz, cache
256 Ko, FSB 533 MHz , 1G RAM.
Hope it can help.
Now I have a question to TE110P users :
The card is physically plugged, modprobe, ztcfg ok etc
Helo,
I have problem with Digium TE110P connected to CISCO 3640 (port on
NM-HDV-2E1-60) wth PRI E1 link. I use CISCO now for testing but when I
tried with real PBX problem was exactly same.
I have this messages in Asterisk conole and log sometimes:
NOTICE[1115] chan_zap.c: PRI got event: HDLC Ab
Julian Varanini wrote:
Hi Groupies,
I am sort of new to the whole asterisk thing, especially when it comes
to the Digium TE110P card. Does anyone have experience setting this
up? If so can you help me out? The provider for the PRI is going to
be AT&T/SBC.
AT&T/SBC is pretty much a st
Hi Groupies, I am sort of new to the whole asterisk thing, especially when it comes to the Digium TE110P card. Does anyone have experience setting this up? If so can you help me out? The provider for the PRI is going to be AT&T/SBC. Thanks Julian
___
Lincoln Zuljewic Silva ha scritto:
> Hello all. I have a Digium TE110P board and when I do a "zap show
> status" on CLI I get:
> DescriptionAlarms
>IRQbpviolCRC4
> Digium Wildcard TE110P T1/E1 Card 0OK0
Hello all. I have a Digium TE110P board and when I do a "zap show
status" on CLI I get:
DescriptionAlarms
IRQbpviolCRC4
Digium Wildcard TE110P T1/E1 Card 0OK00
0
IRQ = 0 ?
In lspci I h
Hi,
On Sat, 2006-04-15 at 20:07 +0800, kevin ling wrote:
> Hi,
>
> I have try install the TE110P or TDM400P on HP Proliant DL380 Server. And
> use the AAH 2.7 distribution. When I reboot the server. The CentOS always
> display "some hardware removed - Tiger pci card." & "Found new
> hard
Hi,
I have try install the TE110P or TDM400P on HP Proliant DL380 Server. And
use the AAH 2.7 distribution. When I reboot the server. The CentOS always
display "some hardware removed - Tiger pci card." & "Found new
hardware - Tiger pci card". Is it the digium cards have some
compatia
21 matches
Mail list logo
