Hi All;
To overcome the echo problem, what mainly I have to do in the configuration
other than the following line in the system.conf under dahdi directory?
echocanceller=mg2,1-16
1) How can I know if the digium card supporting echo cancellator?
2) If I am getting a message in the consol that un
On Sat, 13 Aug 2011, bilal ghayyad wrote:
To overcome the echo problem...
Digium sells 'High Performance Echo Cancellation'
http://www.digium.com/en/products/software/hpec.php
Also, the 'Oslec Echo Canceller'
http://www.rowetel.com/blog/?page_id=454
is supposed to be pretty
OK, I can buy echo canceller from Digium and how will be installed in the
digium card? Or it is a hardware?
Currently I am reading a message at the consol that Unable to enable the echo
canceller .. does this means that Digium card that I have is not supporting?
This is the output of the dahdi_
On Tue, Aug 16, 2011 at 05:34:58AM -0700, bilal ghayyad wrote:
> OK, I can buy echo canceller from Digium and how will be installed in
> the digium card? Or it is a hardware?
If you're using a TDM2400 you can buy a hardware echocan module or HPEC (which
is a proprietary software echocan) if you de
The current dahdi version is:
PBX-FF*CLI> dahdi show version
DAHDI Version: 2.4.1.2 Echo Canceller:
Well, the output of the dahdi_cfg as shown below, it declares there is invalid
argument. But, really I tried to change the configuration in the systems.conf
from fxoks=1-16 to fxsks=1-16 but did
On Tue, Aug 16, 2011 at 05:38:37PM -0700, bilal ghayyad wrote:
> The current dahdi version is:
>
> PBX-FF*CLI> dahdi show version
> DAHDI Version: 2.4.1.2 Echo Canceller:
>
> Well, the output of the dahdi_cfg as shown below, it declares there is
> invalid argument. But, really I tried to change t
