ly decided to
work.
Tim
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Barry L. Kline
Sent: 03 March 2010 16:06
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Gettin
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Tim Culhane wrote:
> Here is my output of 'sip show peers'
>
> user1/user110.41.3.12 D N 10434Unmonitored
> user2/user210.41.3.12 D N 65293Unmonitored
> user3/user3(Un
users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Danny Nicholas
Sent: 03 March 2010 15:42
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Getting verbose or debug tracing in Asterisk
W/O mailbox should jus
AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Getting verbose or debug tracing in Asterisk
Hi,
Not sure what I changed, but when I open x-lite now, I get the following
verbose output on the CLI:
[Mar 3 15:31:22] NOTICE[2273]: chan_s
on'
Subject: Re: [asterisk-users] Getting verbose or debug tracing in Asterisk
The problem is on your x-lite end. If you were speaking to Asterisk (even
incorrectly), it would at least indicate a bad connection. IMO, it is
better to use numbers for extensions as opposed to user1, but that
.
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Tim Culhane
Sent: Wednesday, March 03, 2010 4:13 AM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] Getting verbose or debug tracing in Asterisk
Hi,
For some
In logger.conf do you have verbose and debug on the console line? If not add
them and do logger reload.
--
Jim Dickenson
mailto:dicken...@cfmc.com
CfMC
http://www.cfmc.com/
On Mar 3, 2010, at 2:13 AM, Tim Culhane wrote:
> Hi,
>
> For some reason I can't get Asterisk to produce debug or verb
Hi,
For some reason I can't get Asterisk to produce debug or verbose tracing
output.
I connect to asterisk using 'asterisk -r'
Then issue the command:
Core set debug 10
And
Core set verbose 10
And it confirms that the correct level has been set.
I then attempt a connection from an x-lite cl
