On Thu, Dec 27, 2007 at 04:00:49PM +0100, Jaap Winius wrote:
> Quoting Tzafrir Cohen <[EMAIL PROTECTED]>:
>
> >> > cat /proc/zaptel/*
> >>
> >> Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] layer 1 DEACTIVATED
> >> (F4)" AMI/CCS
> >>
> >> 1 ZTHFC1/0/1 Clear (In use)
> >>
Quoting Tzafrir Cohen <[EMAIL PROTECTED]>:
>> > cat /proc/zaptel/*
>>
>> Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] layer 1 DEACTIVATED
>> (F4)" AMI/CCS
>>
>> 1 ZTHFC1/0/1 Clear (In use)
>> 2 ZTHFC1/0/2 Clear (In use)
>> 3 ZTHFC1/0/3 HDLCFCS (In use)
>> Spa
On Thu, Dec 27, 2007 at 06:03:09PM +1300, Matt Riddell wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Can Zaptel support HFC cards now (i.e. without mISDN?)
Zaptel drivers for PCI HFC-S cards (cards that use the single-port chips
of Cologne Chips) is zaphfc from BRIstuff, or vzaphf
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Can Zaptel support HFC cards now (i.e. without mISDN?)
If so, does that include the Digium b410p card?
- --
Kind Regards,
Matt Riddell
Director
___
http://www.venturevoip.com (Great new VoIP end to end so
On Wed, Dec 26, 2007 at 06:12:13PM -0500, dave cantera wrote:
> the /tmp sometimes gets its sticky bit set...
>
> # ls -ld /tmp
>
> will tell you what permissions are set at
>
> /tmp should read:
>
> [EMAIL PROTECTED] ~]# ls -ld /tmp
> drwxrwxrwx 7 root root 4096 Dec 26 08:13 /tmp
>
> it
On Thu, Dec 27, 2007 at 12:07:50AM +0100, Jaap Winius wrote:
> Quoting Tzafrir Cohen <[EMAIL PROTECTED]>:
>
> >> However, after installing the zaptel package, I get these
> >> errors:
> >>
> >> # genzaptelconf -sd
> >> Stopping Asterisk PBX: asterisk.
> >> cat: /tmp/tmp.uiMna12463/span
the /tmp sometimes gets its sticky bit set...
# ls -ld /tmp
will tell you what permissions are set at
/tmp should read:
[EMAIL PROTECTED] ~]# ls -ld /tmp
drwxrwxrwx 7 root root 4096 Dec 26 08:13 /tmp
it may read, which would not allow file/directory creation (notice the
't' in the other'
Quoting Tzafrir Cohen <[EMAIL PROTECTED]>:
>> However, after installing the zaptel package, I get these
>> errors:
>>
>> # genzaptelconf -sd
>> Stopping Asterisk PBX: asterisk.
>> cat: /tmp/tmp.uiMna12463/span_termtype: No such file or directory
>> cat: /tmp/tmp.uiMna12463/span_ter
On Wed, Dec 26, 2007 at 09:32:03PM +0100, Jaap Winius wrote:
> Quoting Tzafrir Cohen <[EMAIL PROTECTED]>:
>
> >> Could someone please point me in the direction of some reasonable
> >> instructions
> >> for setting up ISDN BRI support for Asterisk 1.2 (Debian etch) with
> >> HFC-PCI cards (Colog
Quoting Tzafrir Cohen <[EMAIL PROTECTED]>:
>> Could someone please point me in the direction of some reasonable
>> instructions
>> for setting up ISDN BRI support for Asterisk 1.2 (Debian etch) with
>> HFC-PCI cards (Cologne chips) and/or cards with Winbond W6692CF chips?
>
> apt-get install
On Wed, Dec 26, 2007 at 06:03:02PM +0100, Jaap Winius wrote:
> Hi all,
>
> Could someone please point me in the direction of some reasonable instructions
> for setting up ISDN BRI support for Asterisk 1.2 (Debian etch) with
> HFC-PCI cards (Cologne chips) and/or cards with Winbond W6692CF chips?
Hi all,
Could someone please point me in the direction of some reasonable instructions
for setting up ISDN BRI support for Asterisk 1.2 (Debian etch) with
HFC-PCI cards (Cologne chips) and/or cards with Winbond W6692CF chips?
I keep finding solutions that involve running misdn-init. However,
12 matches
Mail list logo
