terisk-users-
> [EMAIL PROTECTED] On Behalf Of Tom Moore
> Sent: Tuesday, July 15, 2008 9:14 AM
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: Re: [asterisk-users] Interfacing pri card to legacy pbx
>
> Actually what I'm doing is interfac
lto:[EMAIL PROTECTED] On Behalf Of Nicolas Ross
Sent: Tuesday, July 15, 2008 8:49 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Interfacing pri card to legacy pbx
I cannot tell for sure for any system, but we have an old Portmaster PM3
hooked-up from one p
I cannot tell for sure for any system, but we have an old Portmaster PM3
hooked-up from one port of our Sangoma A104d card, another one being from
telco.
So, yes you can "emulate" the telco from a sangoma A10x card. Here's what I
have in my zapata.conf :
;Sangoma A104 port 1 [slot:12 bus:0 spa
Hi guys,
Can I use a Sangoma a101 to interface a legacy pbx to an Asterisk server?
The pbx doesn't have sip and I want to come in off of a sip trunk and
interface with the older system.
I know I can use a pri card to hook in to the phone network, but can I use
this same card to feed back the signal