Karsten Wemheuer wrote:
Hello,
Am Donnerstag, den 15.02.2007, 10:55 +0800 schrieb Leo Ann Boon:
1. The smallest mini-ITX case I found that accepts a PCI card is the
Travla C138: If you used a mini-ITX with a Digium TDM400P, do you know
if it fits? I didn't find its width, and apparently, th
Hello,
Am Donnerstag, den 15.02.2007, 10:55 +0800 schrieb Leo Ann Boon:
> >
> > 1. The smallest mini-ITX case I found that accepts a PCI card is the
> > Travla C138: If you used a mini-ITX with a Digium TDM400P, do you know
> > if it fits? I didn't find its width, and apparently, the C138 will n
Vincent Delporte a écrit :
At 10:09 11/02/2007 -0500, Michelle Dupuis Henderson wrote:
We use a lot of mini-itx pc's, including the pCI slot. I don't think
any of the systems have shared an irq with the PCI slot
Thanks for the tip. In that case, I have a couple of questions for you :-)
1
At 10:09 11/02/2007 -0500, Michelle Dupuis Henderson wrote:
Yes on booting from a USB drive/memory stick - we setup the same way.
Thanks for the tip.
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRI
1. The smallest mini-ITX case I found that accepts a PCI card is the
Travla C138: If you used a mini-ITX with a Digium TDM400P, do you know
if it fits? I didn't find its width, and apparently, the C138 will not
accept a PCI card bigger than 17,52cm.
The C137 can fit 2 TDM400P with the right
At 10:09 11/02/2007 -0500, Gordon Henderson wrote:
On the CN1000 boards I'm using, the PCI slot seems tobe locked to IRQ10.
The on-board USB hardware also seems to be wired to IRQ 10 :-) Using the
BIOS to "reserve" IRQ 10 caused the on-board USB hardware to move to IRQ5
on the old VIA 533MHz b
users@lists.digium.com
Subject: Re: [asterisk-users] Mini-ITX board + FXO PCI card?
At 10:09 11/02/2007 -0500, Michelle Dupuis Henderson wrote:
>We use a lot of mini-itx pc's, including the pCI slot. I don't think
>any of the systems have shared an irq with the PCI slot
Thanks
At 10:09 11/02/2007 -0500, Michelle Dupuis Henderson wrote:
We use a lot of mini-itx pc's, including the pCI slot. I don't think any
of the systems have shared an irq with the PCI slot
Thanks for the tip. In that case, I have a couple of questions for you :-)
1. The smallest mini-ITX case
On Tue, 13 Feb 2007, Vincent Delporte wrote:
At 10:09 11/02/2007 -0500, Gordon Henderson wrote:
Check the processor spec. carefully. [...] Also make sure you compile
asterisk for an i586
OK, I'll make sure it has enough cache and I'll recompile the code myself.
I'm thinking of getting an ML
: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] Mini-ITX board + FXO PCI card?
At 10:09 11/02/2007 -0500, Gordon Henderson wrote:
>Check the processor spec. carefully. [...] Also make sure you compile
>asterisk for an i586
OK, I'll make sure it has enough cache and I&
At 10:09 11/02/2007 -0500, Gordon Henderson wrote:
Check the processor spec. carefully. [...] Also make sure you compile
asterisk for an i586
OK, I'll make sure it has enough cache and I'll recompile the code myself.
I'm thinking of getting an ML 8000
http://via.com.tw/en/products/mainboards/
On Sun, 11 Feb 2007, Vincent Delporte wrote:
Hello
Before I order a Travla C156 case
(http://206.14.132.88/products/Travla/c156/C156.html), a Via mini-ITX
motherboard (either the fanless ME6000
http://idotpc.com/TheStore/pc/viewPrd.asp?idcategory=50&idproduct=4 or the
fan-equipped M1
h
I have built several mini-itx via systems, and they work fine with
Asterisk.
We use one with a dual port E1 card in our office as our phone system.
PaulH
On Sun, 2007-02-11 at 00:47 +0100, Vincent Delporte wrote:
> Hello
>
> Before I order a Travla C156 case
> (http://206.14.132.88/products/T
Hello
Before I order a Travla C156 case
(http://206.14.132.88/products/Travla/c156/C156.html), a Via mini-ITX
motherboard (either the fanless ME6000
http://idotpc.com/TheStore/pc/viewPrd.asp?idcategory=50&idproduct=4 or the
fan-equipped M1
http://idotpc.com/TheStore/pc/viewPrd.asp?idcate
14 matches
Mail list logo