Re: [asterisk-users] [NEWBIE] Right dect to buy to use with asterisk

Hi, I made good experienes with Siemens Gigaset C610 IP. This model is about 90 Euro. Configuration via web interface. But encryption (SIPS/SRTP) is *not* possible with this phones. -Thorsten- Am 11.12.2013 11:30, schrieb Mario Giammarco: Hello, I need to setup this configuration: - aster

Re: [asterisk-users] [NEWBIE] Right dect to buy to use with asterisk

Hello Mario, nice to meet you on this mailing list! Gigaset phones are a very high quality/price ratio, so I'll suggest you to go with the dect ip models. Then you'll need to configure asterisk to act as IVR, configure a queue and a failover to ring all hunt list. Drop me a phone call and I'll be

[asterisk-users] [NEWBIE] Right dect to buy to use with asterisk

Hello, I need to setup this configuration: - asterisk as IVR; - dect phones. So basically I need a "standard set" of features: - each dect phone has its extension so I can call it directly; - handover of a call with "R" key; - if a call is not replied by someone ring all phones. I have little b

Re: [asterisk-users] Newbie´s question about Asterisk...

First of all, thank you for your help. I was seing Cisco and Linsys web sites and I just came across this 2 devices: Linksys SPA8000 8 phone ports, 1 port ethernet. Cisco SPA8800 4 phone ports, 4 lines, 1 port ethernet. I think they could work for us, because I need maximum 10 normal phones and

Re: [asterisk-users] Newbie´s question about Asterisk...

(Please don't top-post and please trim posts that are no longer relevant.) On Fri, 18 Feb 2011, Francisco Javier Cintrón Olguín wrote: I think I have 3 PSTN lines because I can connect a normal telephone to them all and make calls between each of them. We have 5 normal telephones and 1 panason

Re: [asterisk-users] Newbie´s question about Asterisk...

...@lists.digium.com on behalf of Francisco Javier Cintrón Olguín Sent: Fri 2/18/2011 12:09 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users]Newbie´s question about Asterisk... Is there another way to interface to 3 external and 6 internal lines?? Thank you

Re: [asterisk-users] Newbie´s question about Asterisk...

’t mention that one! >> >> >> >> *From:* asterisk-users-boun...@lists.digium.com [mailto: >> asterisk-users-boun...@lists.digium.com] *On Behalf Of *DHAVAL INDRODIYA >> *Sent:* Friday, February 18, 2011 6:11 AM >> >> *To:* Asterisk Users

Re: [asterisk-users] Newbie´s question about Asterisk...

’t mention that one! >> >> >> >> *From:* asterisk-users-boun...@lists.digium.com [mailto: >> asterisk-users-boun...@lists.digium.com] *On Behalf Of *DHAVAL INDRODIYA >> *Sent:* Friday, February 18, 2011 6:11 AM >> >> *To:* Asterisk Users Mailing List - N

Re: [asterisk-users] Newbie´s question about Asterisk...

risk-users-boun...@lists.digium.com [mailto: > asterisk-users-boun...@lists.digium.com] *On Behalf Of *DHAVAL INDRODIYA > *Sent:* Friday, February 18, 2011 6:11 AM > > *To:* Asterisk Users Mailing List - Non-Commercial Discussion > *Subject:* Re: [asterisk-users]Newbie´s question about A

Re: [asterisk-users] Newbie´s question about Asterisk...

rcial Discussion Subject: Re: [asterisk-users]Newbie´s question about Asterisk... i prefer to go with Elastix very easy to setup and maintain and reach UI rather than freePBX cheers Dhaval On Fri, Feb 18, 2011 at 4:14 PM, Terry Brummell wrote: Dean's link has references to Trixbox. TB has

Re: [asterisk-users] Newbie´s question about Asterisk...

Asterisk Users Mailing List - Non-Commercial Discussion > *Subject:* Re: [asterisk-users]Newbie´s question about Asterisk... > > > > If you already have experience with linux asterisk will be easy for you. > > > > Other people will reply with official links but here is h

Re: [asterisk-users] Newbie´s question about Asterisk...

sers-boun...@lists.digium.com] On Behalf Of Dean Collins Sent: Thursday, February 17, 2011 7:29 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users]Newbie´s question about Asterisk... If you already have experience with linux asterisk will be easy for you. Other pe

Re: [asterisk-users] Newbie´s question about Asterisk...

...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Francisco Javier Cintrón Olguín Sent: Thursday, February 17, 2011 7:26 PM To: asterisk-users@lists.digium.com Subject: [asterisk-users] Newbie´s question about Asterisk... Hi, My name is Francisco from México. Here

[asterisk-users] Newbie´s question about Asterisk...

Hi, My name is Francisco from México. Here, in my work we have a very very old panasonic PBX(12 years old). We are growing and we need to increase our external lines(from 3 to 4) and our internal lines(from 6 to 10). Besides we need voice mail and voice menu too. We asked for a quote to our pana

Re: [asterisk-users] [newbie] Conference call

On Fri, 4 Feb 2011 10:54:56 +0330, Pezhman Lali wrote: >Meetme is a default conference application, but you can try conference or >konference > >http://www.voip-info.org/wiki/view/Asterisk+cmd+Conference > > >http://www.voip-info.org/wiki

Re: [asterisk-users] [newbie] Conference call

Dear, Meetme is a default conference application, but you can try conference or konference http://www.voip-info.org/wiki/view/Asterisk+cmd+Conference http://www.voip-info.org/wiki/view/Asterisk+cmd+Konference

[asterisk-users] [newbie] Conference call

Hello I've never used Asterisk for a three-person call, and would like to check that MeetMe is the way to do this. The ADSL modem provided by my ISP offers free calls to landlines/cellphones when using a handset connected to an RJ11 port on the modem. A three-person call can be set up by

Re: [asterisk-users] Newbie Question...

On Mon, 31 Jan 2011, Piotr Górski wrote: I have 4 PSTN lines connected to TDM410. I can make exact 60 minutes of free calls from each of 4 pstn lines... Can I configure Asterisk to call thru pstn line that has free minutes? For example Outgoing calls are going through PSTN 1 for 60 minutes. W

[asterisk-users] Newbie Question...

Hello! Im new to Asterisk configuration and I have few questions regarding its configuration. I have 4 PSTN lines connected to TDM410. I can make exact 60 minutes of free calls from each of 4 pstn lines... Can I configure Asterisk to call thru pstn line that has free minutes? For example Outgoin

[asterisk-users] Newbie question on GSM adapter

Hi, I've recently installed Asterisk 1.6.2.13. I'd like to connect GSM Trunk to it. I purchased a few Mobigater ProOpen gateways. It states that I should use chan_celliax module to it. On the gsmopen site I see a comment in the documentation that I can install the module on Asterisk 1.2.x, 1.4.

[asterisk-users] [NEWBIE] Simple hunt group on SIP -- need confirmation

Hi, Is doing this as simple as just creating a queue in queue.conf? I have the following setup: 1. Single hunting 1-800 number mapped to multiple numbers in a hunt group by the telco. 2. All calls land up at Asterisk over SIP. Now I need: 3. A hunt group of operator extensions mapped to the inc

[asterisk-users] Newbie: MITEL and Asterisk

Hello, can the Asterisk API be used to automate a MITEL 5330 telephone? If not, are there any other API which can used to do that? Many thanks. phiroc ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing l

Re: [asterisk-users] Newbie Looking For Login/Password

John, Thank you! That was it. I was trying admin, "login"...I should have searched google more. Thank you and thanks for the link - I've got lots of reading ahead of me this evening! Mike On Fri, Dec 25, 2009 at 6:00 PM, John Novack wrote: > > > UIT DEVELOPMENT wrote: >> Sorry for such

Re: [asterisk-users] Newbie Looking For Login/Password

UIT DEVELOPMENT wrote: > Sorry for such a silly question but I am VERY new to Linux, Asterisk, > and so forth. I just downloaded and burned the AsteriskNOW ISO to CD > and installed it. Everything went great. I removed the CD and > rebooted and there is a prompt for me to login. > > I hate to

[asterisk-users] Newbie Looking For Login/Password

Sorry for such a silly question but I am VERY new to Linux, Asterisk, and so forth. I just downloaded and burned the AsteriskNOW ISO to CD and installed it. Everything went great. I removed the CD and rebooted and there is a prompt for me to login. I hate to ask but after searching for a few h

Re: [asterisk-users] Newbie

Hi, I'd say Linphone configuration. I suggest to check Linphone configuration and also asterisk debug - one of those will give you an answer (most likely asterisk debug as it shows you what it receives ... if it doesn't receive anything then Linxphone fails) -- razu On 11/19/2009 11:48 PM, Micha

[asterisk-users] Newbie

Hi, I just started with Asterisk as I am very unhappy with the functionality of my current PBX at home. I try to understand everything and play around, but it is not as easy as I thought. So please be patient if this is a too easy question for You. I installed Asterisk 1.4.26.3 on a Debian Lenny

Re: [asterisk-users] newbie question

On Tue, 17 Nov 2009, Noah Miller wrote: > You could also make it much simpler and just set your verbosity very > low or just turn it off, so there are very few messages coming across > your screen. Unless you're on a really busy machine, you should be > able to read most of the help screens. > >

Re: [asterisk-users] newbie question

>> When typing 'help' on the command line (* console) is there a way to >> keep it from just scrolling most of the information off the top of the >> screen? I can't hit ctrl-s fast enough so I miss most of the info. This >> makes 'help' be not much help. > > my default scroll back buffer is set to

Re: [asterisk-users] newbie question

On Tue, Nov 17, 2009 at 09:09:39AM -0800, Steve Edwards wrote: > > On Tue, Nov 17, 2009 at 11:33:45AM -0500, Bill Shaw wrote: > >> Hi All, > >> [snip] > > > > 2. Run from the external shell prompt: > > > > asterisk -rx 'help ' | less > > Or, you can use the "script" command to capture the output

Re: [asterisk-users] newbie question

> -Original Message- > From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users- > boun...@lists.digium.com] On Behalf Of Bill Shaw > Sent: Tuesday, November 17, 2009 11:34 AM > To: asterisk-users@lists.digium.com > Subject: [asterisk-users] newbie questi

Re: [asterisk-users] newbie question

0:59 AM To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] newbie question On Tue, Nov 17, 2009 at 11:33:45AM -0500, Bill Shaw wrote: > Hi All, > > When typing 'help' on the command line (* console) is there a way to > keep it from just scrolling most of th

Re: [asterisk-users] newbie question

> On Tue, Nov 17, 2009 at 11:33:45AM -0500, Bill Shaw wrote: >> Hi All, >> >> When typing 'help' on the command line (* console) is there a way to >> keep it from just scrolling most of the information off the top of the >> screen? I can't hit ctrl-s fast enough so I miss most of the info. This >>

Re: [asterisk-users] newbie question

On Tue, Nov 17, 2009 at 11:33:45AM -0500, Bill Shaw wrote: > Hi All, > > When typing 'help' on the command line (* console) is there a way to > keep it from just scrolling most of the information off the top of the > screen? I can't hit ctrl-s fast enough so I miss most of the info. This > mak

Re: [asterisk-users] newbie question

Shaw Sent: Tuesday, November 17, 2009 10:34 AM To: asterisk-users@lists.digium.com Subject: [asterisk-users] newbie question Hi All, When typing 'help' on the command line (* console) is there a way to keep it from just scrolling most of the information off the top of the screen? I c

[asterisk-users] newbie question

Hi All, When typing 'help' on the command line (* console) is there a way to keep it from just scrolling most of the information off the top of the screen? I can't hit ctrl-s fast enough so I miss most of the info. This makes 'help' be not much help. Thanks, Bill __

[asterisk-users] Newbie: How to detect an "*" in Read()?

A user embedded an * in a Read command and it causes my AEL script to fail. Does anyone know how I could code to detect it? Thanks. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix,

Re: [asterisk-users] Newbie: How to copy track from CD for MOH without getting "Junk at beginning of frame ..."

On Thu, 20 Aug 2009, Lee, John (Sydney) wrote: >> Convert the file to the native codec(s) in which it will be played. >> > Alex, could you please elaborate on this? I am no audio guy. > On Media player, I can rip it into mp3 or wav or windows media audio. > Which one should I use? Neither. If y

Re: [asterisk-users] Newbie: How to copy track from CD for MOH without getting "Junk at beginning of frame ..."

Probably none of the ones you list, though I believe wav files are uncompressed. Use SOX http://sox.sourceforge.net/ under Linux, Windows or OSX and RIP/Convert the files to match the codec you are using for calls. If you are accepting calls that use the GSM codec then have a set of MOH files enc

Re: [asterisk-users] Newbie: How to copy track from CD for MOH without getting "Junk at beginning of frame ..."

> Yep, agreed. > Convert the file to the native codec(s) in which it will be played. > Alex, could you please elaborate on this? I am no audio guy. On Media player, I can rip it into mp3 or wav or windows media audio. Which one should I use? ___ -- B

Re: [asterisk-users] Newbie: How to copy track from CD for MOH without getting "Junk at beginning of frame ..."

Steve Edwards wrote: > On Wed, 19 Aug 2009, Lee, John (Sydney) wrote: > >> I was copying tracks from CD into mp3 files so that I could use it in >> Asterisk 1.4.21.2 MOH. >> >> Are there any Asterisk+Audio expert that can offer me some advice? > > Don't use MP3. Why would you want to burn CPU cyc

Re: [asterisk-users] Newbie: How to copy track from CD for MOH without getting "Junk at beginning of frame ..."

On Wed, 19 Aug 2009, Lee, John (Sydney) wrote: > I was copying tracks from CD into mp3 files so that I could use it in > Asterisk 1.4.21.2 MOH. > > Are there any Asterisk+Audio expert that can offer me some advice? Don't use MP3. Why would you want to burn CPU cycles decompressing the same stuff

[asterisk-users] Newbie: Mac OS X - Asterisk Gui 2.0 (svn) loops at " Verifying Dialplan Contexts needed for GUI"

Hi All, This is my first post. I searched the archives and found something similar and I tried some of those suggestions. I changed the file permissions on the scripts directory to 777 (which doesn't seem secure), I also manually ran the detectdahdi.sh script. The response is "None". I am running

[asterisk-users] Newbie: How to copy track from CD for MOH without getting "Junk at beginning of frame ..."

I was copying tracks from CD into mp3 files so that I could use it in Asterisk 1.4.21.2 MOH. (BTW, I have already secured proper license to play MOH to callers.) I used MS Media Player version 11 and rip it at 128kbps (smallest) but whenever I listen to MOH, I saw the following message on the Aste

Re: [asterisk-users] Newbie: How to find the serial number ofDigium card?

Behalf Of Tilghman > Lesher > Sent: Monday, 17 August 2009 1:45 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Newbie: How to find the serial number > ofDigium card? > > On Sunday 16 August 2009 19:59:50 Lee, John (Sydney) wrote: >

Re: [asterisk-users] Newbie: How to find the serial number ofDigium card?

Lee, John (Sydney) wrote: > Thanks Tilghman. > I learnt it the hard way - I never imagined I need to jot down the > serial number of a PCI card :-( > I've had a linecard that's been unregistered now for 4 years or more, because it's in a production server. It does of course mean that I didn't ge

Re: [asterisk-users] Newbie: How to find the serial number ofDigium card?

:45 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Newbie: How to find the serial number ofDigium card? On Sunday 16 August 2009 19:59:50 Lee, John (Sydney) wrote: > Does anyone know how to find the serial number of Digium card without > openi

Re: [asterisk-users] Newbie: How to find the serial number of Digium card?

On Sunday 16 August 2009 19:59:50 Lee, John (Sydney) wrote: > Does anyone know how to find the serial number of Digium card without > opening the machine? > > I was trying to call for support at Digium and they asked me for the > serial number. You cannot. The serial number is not anywhere in the

[asterisk-users] Newbie: How to find the serial number of Digium card?

Does anyone know how to find the serial number of Digium card without opening the machine? I was trying to call for support at Digium and they asked me for the serial number. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Ast

Re: [asterisk-users] newbie questions

On Sat, 20 Jun 2009, C. Savinovich wrote: > Let me see if I get you: you inserted the installation CD, then you > restarted the computer, and now you want to know what to do next? How about: 1) Turn off the computer. 2) Read the installation guide for the CD. 3) Install the software. 4) Read

[asterisk-users] newbie questions

I have an Asterisknow.org CD. When I boot up, it seems ready for me to choose update, console, etc. I'm assuming I need to do something at the CLI prompt. Is there a tutorial that would take me from loading CD to making first test call? Computer is Dell Optiplex GX260 50GB free disk space 1.

Re: [asterisk-users] Newbie, Question on making a PSTN call..

On Mon, 15 Jun 2009, Shiva Kumar wrote: Hello Asterisk-users, I am new to Asterisk. I got SIP Calls to work between two computers using a soft phone and asterisk in the middle. Since then, I have been trying to get my soft phone to make a PSTN call with terrible failure for about two days now.

Re: [asterisk-users] Newbie, Question on making a PSTN call..

com Subject: Re: [asterisk-users] Newbie, Question on making a PSTN call.. Need help pls..Anyone? On Mon, Jun 15, 2009 at 10:58 PM, Shiva Kumar wrote: Hello Asterisk-users, I am new to Asterisk. I got SIP Calls to work between two computers using a soft phone and asterisk in the middle. Since th

Re: [asterisk-users] Newbie, Question on making a PSTN call..

Need help pls..Anyone? On Mon, Jun 15, 2009 at 10:58 PM, Shiva Kumar wrote: > Hello Asterisk-users, > I am new to Asterisk. I got SIP Calls to work between two computers using a > soft phone and asterisk in the middle. Since then, I have been trying to get > my soft phone to make a PSTN call wit

[asterisk-users] Newbie, Question on making a PSTN call..

Hello Asterisk-users, I am new to Asterisk. I got SIP Calls to work between two computers using a soft phone and asterisk in the middle. Since then, I have been trying to get my soft phone to make a PSTN call with terrible failure for about two days now. On Windows using asteriskwin32: I have a so

Re: [asterisk-users] Newbie trying to make calls outside via digiumcard and POTS line

ium.com > [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Bruce Thayre > Sent: Monday, March 30, 2009 4:16 PM > To: asterisk-users@lists.digium.com > Subject: [asterisk-users] Newbie trying to make calls outside via digiumcard > and POTS line > > Hello, > This

Re: [asterisk-users] Newbie trying to make calls outside via digiumcard and POTS line

Show us your dialplan. -Original Message- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Bruce Thayre Sent: Monday, March 30, 2009 4:16 PM To: asterisk-users@lists.digium.com Subject: [asterisk-users] Newbie trying to make calls

Re: [asterisk-users] Newbie trying to make calls outside via digium card and POTS line

On Mon, Mar 30, 2009 at 5:16 PM, Bruce Thayre wrote: > > Up to this point, all i have set up are two SIP phones, my POTS phone, > and 1 ring group. My POTS line is connected to channel 1, and my POTS > phone is connected on channel 3. Perhaps my understanding of how the > calls are handled is fl

[asterisk-users] Newbie trying to make calls outside via digium card and POTS line

Hello, This is my first asterisk installation, and having read up on the documentation, and trying several tutorials i'm unable to get my outbound route working. I'm certain it's an issue with my configuration and my inexperience with asterisk. So i have my POTS phone connected to my digium card,

Re: [asterisk-users] Newbie query: how to write priority n+101

On Thu, 2009-02-05 at 22:01 +0100, Philipp Kempgen wrote: > Mark Michelson schrieb: > > Actually, jumping to priority n + 101 is a thing of the past > > And in addition extensions.conf is a thing of the past. ;-) How about .. dialplan.conf .;-)

Re: [asterisk-users] Newbie query: how to write priority n+101

On Thu, 2009-02-05 at 22:01 +0100, Philipp Kempgen wrote: > Mark Michelson schrieb: > > Actually, jumping to priority n + 101 is a thing of the past > > And in addition extensions.conf is a thing of the past. ;-) > extensions.ael is cleaner and easier to maintain for most > purposes. > In the s

Re: [asterisk-users] Newbie query: how to write priority n+101

On Thu, 2009-02-05 at 22:09 +, Geoff Lane wrote: > Thanks. For info, *TFOT says: > > PrivacyManager() sets a channel variable named PRIVACYMGRSTATUS to > either SUCCESS or FAILURE. If Caller ID is received on the channel, > PrivacyManager() does nothing. > > I've tried it and you're correct.

Re: [asterisk-users] Newbie query: how to write priority n+101

Geoff Lane wrote: > On Thursday, February 5, 2009, Mark Michelson wrote: > >>> I've tried it and you're correct. So it looks like the docs need a >>> bug report - any idea how I go about that? > >> If you're using the 2nd edition of the book, check the preface, page xix for >> contact informatio

Re: [asterisk-users] Newbie query: how to write priority n+101

On Thursday, February 5, 2009, Mark Michelson wrote: >> I've tried it and you're correct. So it looks like the docs need a >> bug report - any idea how I go about that? >> >> Thanks again, >> > If you're using the 2nd edition of the book, check the preface, page xix for > contact information.

Re: [asterisk-users] Newbie query: how to write priority n+101

Geoff Lane wrote: > On Thursday, February 5, 2009, Tilghman Lesher wrote: > >> The correct string is "FAILED", not "FAILURE". > > Thanks. For info, *TFOT says: > > PrivacyManager() sets a channel variable named PRIVACYMGRSTATUS to > either SUCCESS or FAILURE. If Caller ID is received on the chan

Re: [asterisk-users] Newbie query: how to write priority n+101

erisk-users-boun...@lists.digium.com [mailto:asterisk-users- > boun...@lists.digium.com] On Behalf Of Philipp Kempgen > Sent: Thursday, February 05, 2009 16:01 > To: Asterisk Users > Subject: Re: [asterisk-users] Newbie query: how to write priority n+101 > > Mark Michelson

Re: [asterisk-users] Newbie query: how to write priority n+101

Tilghman Lesher schrieb: > On Thursday 05 February 2009 15:37:19 Geoff Lane wrote: >> BTW, on a related note, I'm having some trouble with Privacy Manager >> that I'd appreciate some insight with. In one priority, I'm calling >> PrivacyManager(2,8). In the next priority, I've got: >> GotoIf($["$

Re: [asterisk-users] Newbie query: how to write priority n+101

On Thursday, February 5, 2009, Tilghman Lesher wrote: > The correct string is "FAILED", not "FAILURE". Thanks. For info, *TFOT says: PrivacyManager() sets a channel variable named PRIVACYMGRSTATUS to either SUCCESS or FAILURE. If Caller ID is received on the channel, PrivacyManager() does nothin

Re: [asterisk-users] Newbie query: how to write priority n+101

On Thursday 05 February 2009 15:37:19 Geoff Lane wrote: > On Thursday, February 5, 2009, Philipp Kempgen wrote: > > And in addition extensions.conf is a thing of the past. ;-) > > extensions.ael is cleaner and easier to maintain for most purposes. > > Oh-oh ... I don't think I can keep up with the

Re: [asterisk-users] Newbie query: how to write priority n+101

On Thursday, February 5, 2009, Philipp Kempgen wrote: > And in addition extensions.conf is a thing of the past. ;-) > extensions.ael is cleaner and easier to maintain for most purposes. Oh-oh ... I don't think I can keep up with the rate of change ;-) BTW, on a related note, I'm having some tro

Re: [asterisk-users] Newbie query: how to write priority n+101

Philipp Kempgen wrote: > And in addition extensions.conf is a thing of the past. ;-) > extensions.ael is cleaner and easier to maintain for most > purposes. > *gack* Doug -- Ben Franklin quote: "Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve nei

Re: [asterisk-users] Newbie query: how to write priority n+101

Mark Michelson schrieb: > Actually, jumping to priority n + 101 is a thing of the past And in addition extensions.conf is a thing of the past. ;-) extensions.ael is cleaner and easier to maintain for most purposes. Philipp Kempgen -- AMOOCON 2009, May 4-5, Rostock / Germany -> http://ww

Re: [asterisk-users] Newbie query: how to write priority n+101

On Thursday, February 5, 2009, Mark Michelson wrote: > Actually, jumping to priority n + 101 is a thing of the past, and > this will only occur now if you pass the 'j' option to Dial. Dial > will just go to the next priority on a timeout now, and the > DIALSTATUS channel variable will be set to

Re: [asterisk-users] Newbie query: how to write priority n+101

Geoff Lane wrote: > Hi All, > > Asterisk 1.4.12 on CentOS 5 > > Sorry for a question that I'm guessing is obvious to most of you. > > I'm trying to revamp my dialplan. When I first created it, I had > something like: > > exten => s,1,Set(CALLERID(name)=${DB(cidname/${CALLERID(num)})}) > exten =

[asterisk-users] Newbie query: how to write priority n+101

Hi All, Asterisk 1.4.12 on CentOS 5 Sorry for a question that I'm guessing is obvious to most of you. I'm trying to revamp my dialplan. When I first created it, I had something like: exten => s,1,Set(CALLERID(name)=${DB(cidname/${CALLERID(num)})}) exten => s,2,Dial(${rgMain},${RINGTIME},t) exte

Re: [asterisk-users] Newbie in Cisco Phone

ommercial Discussion' Subject: Re: [asterisk-users] Newbie in Cisco Phone Hi I am no expert in the cisco phone Do you have time to help Sam -Original Message- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Federico Santulli S

Re: [asterisk-users] Newbie in Cisco Phone

- Non-Commercial Discussion Cc: tam...@gmail.com Subject: Re: [asterisk-users] Newbie in Cisco Phone you can try chan_sccp at www.chan-sccp.org it supports most of ccm features and all kind of cisco phones with skinny firmware. Take a look ;) If you need support you can write me back. Federico

Re: [asterisk-users] Newbie in Cisco Phone

ist - Non-Commercial Discussion'" Sent: Friday, January 23, 2009 8:56 AM Subject: Re: [asterisk-users] Newbie in Cisco Phone > Well does it matter if the asterisk server is not located in the same > network? > I am willing to spend a bit of cash to get someone help me to s

Re: [asterisk-users] Newbie in Cisco Phone

age- > From: asterisk-users-boun...@lists.digium.com > [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Michiel van > Baak > Sent: Friday, January 23, 2009 3:35 PM > To: asterisk-users@lists.digium.com > Subject: Re: [asterisk-users] Newbie in Cisco Phone > >

Re: [asterisk-users] Newbie in Cisco Phone

[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Michiel van Baak Sent: Friday, January 23, 2009 3:35 PM To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] Newbie in Cisco Phone On 05:39, Fri 23 Jan 09, Sam Tam wrote: > Yes I know too. > Is there anyway to make it work with as

Re: [asterisk-users] Newbie in Cisco Phone

Commercial Discussion > Subject: Re: [asterisk-users] Newbie in Cisco Phone > > The 7936G/ 7937G Data Sheet says SCCP only which is a shame. It really is a > great sounding phone. I have several customers with them as SCCP. > > > > http://www.cisco.com/

Re: [asterisk-users] Newbie in Cisco Phone

List - Non-Commercial Discussion Subject: Re: [asterisk-users] Newbie in Cisco Phone Asterisk's Skinny support is very rudimentary and doesn't include the CCM provisioning stuff. Short answer - not really. Not unless you want to go through a *whole* lot of work. Sam Tam wrote: &g

Re: [asterisk-users] Newbie in Cisco Phone

.com/en/US/prod/collateral/voicesw/ps6788/phones/ps379/ps875 > 9/product_data_sheet0900aecd806e021a.html > > > > > > From: asterisk-users-boun...@lists.digium.com > [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Sam Tam > Sent: Thursday, January 22, 2009 3:54 PM > To: 'Asteris

Re: [asterisk-users] Newbie in Cisco Phone

: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Newbie in Cisco Phone The 7936G/ 7937G Data Sheet says SCCP only which is a shame. It really is a great sounding phone. I have several customers with them as SCCP. http://www.cisco.com/en/US/prod/collateral/voicesw

Re: [asterisk-users] Newbie in Cisco Phone

-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Sam Tam Sent: Thursday, January 22, 2009 3:54 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: [asterisk-users] Newbie in Cisco Phone Hello all I have used some low

[asterisk-users] Newbie in Cisco Phone

Hello all I have used some low end cisco phones in the past and had no problem setting up SIP on it. But today, I have made a big mistake. Buying Cisco Conference phone without even looking whether it supports SIP on not. And yes it is the nice 7937G that I am talking about. Damn this is ann

Re: [asterisk-users] Newbie Polycom: Cannot conference with >10 digit 3rd party

Lee, John (Sydney) wrote: > Calling all Polycom gurus: > > I am using Polycom IP601 phones with Asterisk 1.4.21.2 > > In all Polycom phones, I set the following in sip.cfg. > > > > > (I leave the digitmap unchanged because I thought setting > impossibleMatchHandling will ignore the bitmap)

[asterisk-users] Newbie Polycom: Cannot conference with >10 digit 3rd party

Calling all Polycom gurus: I am using Polycom IP601 phones with Asterisk 1.4.21.2 In all Polycom phones, I set the following in sip.cfg. (I leave the digitmap unchanged because I thought setting impossibleMatchHandling will ignore the bitmap) ...so that I could dial any number by entering

Re: [asterisk-users] Newbie AEL2: Syntax for Hint

Lee, John (Sydney) wrote: > I am struggling to find out how to code hint in AEL2. > > I did hint(Custom:light1) and it keeps complaining about the : (colon). > It works fine for SIP device like hint(SIP/439). > > Anyone who has tried it before? > I just whipped this up to test and it works for

Re: [asterisk-users] Newbie AEL2: Syntax for Hint

> context BLF { > hint(Sip/1000) 1000 => NoOp(); > }; > > Works for me Thanks Eric. I did not experience any problem in hint with SIP. The problem is if you use it with Custom. <>___ -- Bandwidth and Colocation Provided by http://www.api-di

Re: [asterisk-users] Newbie AEL2: Syntax for Hint

On Thu, 2008-09-11 at 17:41 +1000, Lee, John (Sydney) wrote: > Steve, I downloaded the latest Asterisk version (see below). > > *CLI> core show version > Asterisk 1.4.21.2 built by root @ machine1 on a i686 running Linux on > 2008-09-11 06:10:06 UTC > > If I code: > > Hint(Custom:light1) > > It

Re: [asterisk-users] Newbie AEL2: Syntax for Hint

on the console. > -Original Message- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of Steve Murphy > Sent: Thursday, 11 September 2008 2:13 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Ne

Re: [asterisk-users] Newbie AEL2: Syntax for Hint

urphy > Sent: Thursday, 11 September 2008 2:13 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Newbie AEL2: Syntax for Hint > > On Wed, 2008-09-10 at 18:10 +1000, Lee, John (Sydney) wrote: > > I am struggling to find out how to code

Re: [asterisk-users] Newbie AEL2: Syntax for Hint

On Wed, 2008-09-10 at 18:10 +1000, Lee, John (Sydney) wrote: > I am struggling to find out how to code hint in AEL2. > > I did hint(Custom:light1) and it keeps complaining about the : (colon). > It works fine for SIP device like hint(SIP/439). > > Anyone who has tried it before? Yes, a while bac

[asterisk-users] Newbie AEL2: Syntax for Hint

I am struggling to find out how to code hint in AEL2. I did hint(Custom:light1) and it keeps complaining about the : (colon). It works fine for SIP device like hint(SIP/439). Anyone who has tried it before? ___ -- Bandwidth and Colocation Provided by h

[asterisk-users] Newbie questions: seting up extension for miSDN

Hello! Sorry, I'm sure it's stupid. but I've got a simple ISDN line and a simple ISDN-card, now finally running. :-) I'm using application Jack and asterisk (CLI) only to do my bidding. Now I can make calls. But how ca I setup my extensions.conf to receive a call? I've had an example like

Re: [asterisk-users] Newbie Polycom: ACD AgentLogin display on phone

I played with the Polycom login/logout function about a year ago, and it looked brilliant. I could never get it to work, but at the time I had both Polycom and Digium agree that it would be worth getting running. I ran out of time on that project, and have never re-visited it. But it would be

[asterisk-users] Newbie Polycom: ACD AgentLogin display on phone

I have been coding my own IVR for ACD (aka queue) using Polycom phones using AEL2. In particular, I have coded my own AgentCallbackLogin because a) cmd AgentCallbackLogin() is buggy and will not be supported by dev anymore b) I can put in features like hotdesking and additional validation like proh

Re: [asterisk-users] Newbie: Queue and CDR Reporter and Analyser

open source and free? > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Faraz Khan > Sent: August 13, 2008 8:20 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Newbie: Queue and

Re: [asterisk-users] Newbie: Queue and CDR Reporter and Analyser

One of the Asterisk people down here in Melb set it up for the company they used to work for, and I played with it once and it seemed to be usable. PaulH Lee, John (Sydney) wrote: >> Doesn't Queuemetrics run on a license basis? >> Anything else that's probably open source and free? >> >>

  1   2   3   4   5   6   7   8   9   10   >