Hi,
maybe I am a little bit late with this answer.
I take a look at Your config and the debug output.
>
> Provider <--te11xp---> asterisk <---te11xp--> nortel merridian
> option 11c
>
> zapata.conf
> -
> context=from-pstn
> switchtype=dms100
> s
yes.. did that, still the same.. again, just to highlight again my
problem... problem is connecting asterisk to the provider. have no
problem from nortel to asterisk.
i cam route all calls thru SIP. but i wan to route locals calls back to
the provider.. :(
this really gives me headache..
Le
Kong Zhen Shin wrote:
i tried without yellow as well.. and according to zaptel drivers, the
yellow don't do anything, just put a yellow signal where there is
nothing from the provider.
and yes, i did put a pri_net on the span 2, the config is a typo..
thanks for reminding me..
but still i g
i tried without yellow as well.. and according to zaptel drivers, the
yellow don't do anything, just put a yellow signal where there is
nothing from the provider.
and yes, i did put a pri_net on the span 2, the config is a typo..
thanks for reminding me..
but still i got those errors :(
zaptel.conf
---
loadzone=uk
defaultzone=uk
span=1,1,1,ccs,hdb3,crc4,yellow
span=2,0,1,ccs,hdb3,crc4,yellow
I don't think yellow alarm is necessary unless you've been advised by
your carrier.
bchan=1-15,32-46
dchan=16,47
bchan=17-31,48-62
-
Dear Gurus,
i am facing some unknown problem here..
first, let me describe my case.
my office is using a nortel merridian option 11c PBX. and it is
connected to the provider thru a E1 card, which is working fine with no
problem.
my plan it to slot in a server with 2 TE11XP card to intercept
