I am using version 2.2.0.
__Yehavi:
> Date: Thu, 6 Mar 2008 15:01:26 +1100
> From: "Lee, John (Sydney)" <[EMAIL PROTECTED]>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> Subject: Re: [asterisk-users] OT How to Change Polycom Web Admin User:Pass
>
>> As far
> As far as I recall it can be done from the config file only. Here is
the
> relevant line from sip.cfg:
>
> device.auth.loc
> alAdminPassword="YOUR-PASSWORD-HERE" />
>
What sip release are you referring to?
I am looking at sip 1.6.x and sip.cfg only allows you to set the length
of the user and
> I could be mistaken, but I think this has to be done physically from
> the phone. I don't think you can do this with central provisioning or
> from the web interface.
As far as I recall it can be done from the config file only. Here is the
relevant line from sip.cfg:
That stinks. Terrible design flaw.
It wouldn't be such an issue if the whole Polycom page (or any
indication of device) prior to the authentication.
I bet one could google for Polycom phones and login as Polycom:456.
Not that one could do much more than brick the phone (which is bad
enough). On
Hi Steve -
I could be mistaken, but I think this has to be done physically from
the phone. I don't think you can do this with central provisioning or
from the web interface.
- Noah
On Wed, Mar 5, 2008 at 3:20 PM, Steve Totaro
<[EMAIL PROTECTED]> wrote:
> I setup a number of remote phones on
I setup a number of remote phones on public IPs using the web
interface. Now my question is how do I change the default Polycom:456
password via the web interface. Is there a hidden way or does it have
to be done via FTP TFTP?
Thanks,
Steve Totaro
___
