On 01/11/2011 02:20 PM, Gilles wrote:
Hello
I read a whole book on OpenVPN, but still can't figure how to
configure the server + client so that the the client connects and
sends SIP/RTP data through the tunnel.
To get started, I'd rather use a shared key instead of X509
(certificates +
On Tue, 11 Jan 2011, Gilles wrote:
Hello
I read a whole book on OpenVPN, but still can't figure how to
configure the server + client so that the the client connects and
sends SIP/RTP data through the tunnel.
To get started, I'd rather use a shared key instead of X509
(certificates + keys).
On Tue, 11 Jan 2011 15:20:39 +0100, Gilles codecompl...@free.fr
wrote:
By any chance, would someone have a working configuration so I can
take a look?
Got it working :-) Thanks much guys for the help.
For those interested, here's how I did it. Note that the appliance
only has the openvpn server,
In sip_nat.conf you need to specify 10.8.0.1/24 as your localnet and also
make sure you have your externip setup as well. Else you will notice one way
audio or cut off after 30 seconds. Rest of your work is all good. For
security reasons the workstation that creates the keys is not connected to
On Thu, 13 Jan 2011 09:43:26 -0500, Bruce B bruceb...@gmail.com
wrote:
In sip_nat.conf you need to specify 10.8.0.1/24 as your localnet and also
make sure you have your externip setup as well. Else you will notice one way
audio or cut off after 30 seconds.
I don't have sip_nat.conf, as I don't
On Thu, 13 Jan 2011 15:55:10 +0100, Gilles codecompl...@free.fr
wrote:
The only issue I notice, is that Asterisk doesn't tell the other end
when the local end has hung up, so the other end either remains online
or hangs up after 20-30 seconds.
Found it: We must add a localnet directive so that
As I said, your tunnel address should be part of localnet. Otherwise you
experience what you did.
-Bruce
On Thu, Jan 13, 2011 at 10:00 AM, Gilles codecompl...@free.fr wrote:
On Thu, 13 Jan 2011 15:55:10 +0100, Gilles codecompl...@free.fr
wrote:
The only issue I notice, is that Asterisk
On Thu, 13 Jan 2011 10:42:48 -0500, Bruce B bruceb...@gmail.com
wrote:
As I said, your tunnel address should be part of localnet. Otherwise you
experience what you did.
Sorry about that. I didn't make long-enough calls for Asterisk to
disconnect due to the lack of localnet for the VPN, and didn't
On Tue, 11 Jan 2011 10:02:48 -0500, Mark Deneen mden...@gmail.com
wrote:
Using the shared secret will only allow a single point to point
connection. That is, you have to use certificates if you want more
than one client.
Thanks for the tip. I was under the impression that the shared key is
just
On Tue, 11 Jan 2011 10:23:18 -0500, Bruce B bruceb...@gmail.com
wrote:
I have OpenVPN and Asterisk working nicely. However, I do use certificates.
Though, it shouldn't matter. Can you explain what doesn't work for you? Is
the connection not established or is the Asterisk and it's client not
Your network layout is correct.
I am still unclear what is not working for you, but I guess you can't
establish a connection yet.
In the config file server.conf for the server side you will have parameter
verb=3 which you can change to like 9 and see what the error message is upon
connect. If
On Wed, Jan 12, 2011 at 12:08 PM, Gilles codecompl...@free.fr wrote:
On Tue, 11 Jan 2011 10:02:48 -0500, Mark Deneen mden...@gmail.com
wrote:
Using the shared secret will only allow a single point to point
connection. That is, you have to use certificates if you want more
than one client.
On Wed, 2011-01-12 at 14:18 -0500, Mark Deneen wrote:
Static Key disadvantages
* Limited scalability -- one client, one server
* Lack of perfect forward secrecy -- key compromise results in total
disclosure of previous sessions
* Secret key must exist in plaintext form on each VPN peer
*
Hello
I read a whole book on OpenVPN, but still can't figure how to
configure the server + client so that the the client connects and
sends SIP/RTP data through the tunnel.
To get started, I'd rather use a shared key instead of X509
(certificates + keys). The server is running on a uClinux
On Tue, Jan 11, 2011 at 11:20 AM, Gilles codecompl...@free.fr wrote:
Hello
I read a whole book on OpenVPN, but still can't figure how to
configure the server + client so that the the client connects and
sends SIP/RTP data through the tunnel.
To get started, I'd rather use a shared key
On Tue, Jan 11, 2011 at 9:29 AM, Andrew Latham lath...@gmail.com wrote:
On Tue, Jan 11, 2011 at 11:20 AM, Gilles codecompl...@free.fr wrote:
Hello
I read a whole book on OpenVPN, but still can't figure how to
configure the server + client so that the the client connects and
sends SIP/RTP
Hi,
I have OpenVPN and Asterisk working nicely. However, I do use certificates.
Though, it shouldn't matter. Can you explain what doesn't work for you? Is
the connection not established or is the Asterisk and it's client not
communicating?
-Bruce
On Tue, Jan 11, 2011 at 9:20 AM, Gilles
I read a whole book on OpenVPN, but still can't figure how to
configure the server + client so that the the client connects and
sends SIP/RTP data through the tunnel.
To get started, I'd rather use a shared key instead of X509
(certificates + keys). The server is running on a uClinux appliance,
18 matches
Mail list logo
