I'm digging this back up since the problem persists. I've been attempting to
figure out what's been going on and I'm at a stopping point again.
Even though I swore I checked it, it turns out the two cards and the ethernet
controller were all on the same IRQ. I moved the cards around so they
Stephen H. Gerstacker wrote:
I'm just a simple programmer who happens to be the only IT guy in the office.
And I'm just an IT guy, that started learning (And still am) about phone
systems around 10 years ago.
I was just going through the process of elimination, the differences
between our
Stephen H. Gerstacker wrote:
Is there a big difference between the two?
From what I've read, a DMS100 can redirect a call off of your system,
meaning that if you have an inbound call and you want to redirect it to
a different number, the DMS100 will redirect the call and take your
system
Came in this morning to more of the same:
PRI Span: 1 !! Unknown IE 128 (cs0)
-- Span 1: Channel 0/23 got hangup, cause 81
Also, I got a lot of this as well:
[Sep 14 05:54:05] WARNING[16624]: sig_pri.c:1054 pri_find_dchan: Span 1: No
D-channels available! Using Primary channel as
Stephen H. Gerstacker wrote:
Came in this morning to more of the same:
Then, if you have the ability, I'd drop 1.2 back into place and see if
it's happy. But, my feeling is that you'll need to contact the provider.
The other thing that comes to mind is that your PRI card is having
I disabled the echo cancelled on the PRI and the same issues are still popping
up:
PRI Span: 1 !! Unknown IE 128 (cs0)
-- Span 1: Channel 0/22 got hangup, cause 16
Anything else I can try?
Stephen H. Gerstacker
Sr. Database Developer
Electronic Data Payment Systems
Phone: 866.578.9740 ext.
Stephen H. Gerstacker wrote:
Anything else I can try?
Try switchtype=national just for testing.
Doug
--
Ben Franklin quote:
Those who would give up Essential Liberty to purchase a little Temporary Safety,
deserve neither Liberty nor Safety.
--
I made the switch and everything seems to be working. It's hard to tell, since
it never seems to fail for me, but fails once people get in.
A question, though. When we moved the original box to our new office, they
asked if we could support the dms100 setting, which worked. National seems to
I've finally moved from my 5 year old 1.2 installation to a 1.8 installation.
I'm using the packages supplied by asterisk.orghttp://asterisk.org for Ubuntu
10.04, so I am at Asterisk 1.8.6.
On the console, I am seeing:
PRI Span: 1 !! Unknown IE 128 (cs0)
-- Span 1: Channel 0/22 got hangup,
Stephen H. Gerstacker wrote:
so any help would be appreciated
You could start by supplying snippets of your config for the PRI.
Telling us what PRI card you're using.
For example, my dahdi config for my PRI:
cd /etc/dahdi
cat system.conf
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
/etc/dahdi/system.conf:
# Autogenerated by /usr/sbin/dahdi_genconf on Wed Aug 31 18:10:31 2011
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1:
11 matches
Mail list logo
