On 7/6/2023 7:08 PM, John Covici wrote:
Hi. I have run into a problem compiling dahdi-linux in kernel
6.1.0-10. Apparently there was a change, so I found a patch to fix
stdbool.h but now I have an implicit declaration of
pci_alloc_consistent in drivers/dahdi/wct4xxp/base.c I don't see any
Hi. I have run into a problem compiling dahdi-linux in kernel
6.1.0-10. Apparently there was a change, so I found a patch to fix
stdbool.h but now I have an implicit declaration of
pci_alloc_consistent in drivers/dahdi/wct4xxp/base.c I don't see any
other references to that name anywhere. I am
Luca Bertoncello schrieb:
> But if I try to call another VoIP-phone it rings but no voice will be
> transferred...
Got it!
A "little" firewall problem... :(
Regards
Luca Bertoncello
(lucab...@lucabert.de)
--
Tzafrir Cohen schrieb:
> This means that you have configured a dahdi channel in
> /etc/asterisk/chan_dahdi.conf . The default configuration does not
> include one. Do you have any DAHDI device on the system?
I think not...
> If /dev/dahdi/channel itself does not
On Thu, Feb 15, 2018 at 06:55:16PM +0100, Luca Bertoncello wrote:
> Hi again!
>
> I tried to attach two VoIP-phones to my new Asterisk 13.14.1 on a Banana PI
> with Armbian/Debian 9.
>
> First test was to call a test service that say the time. Works!
> Second test was to record my voice and play
Hi again!
I tried to attach two VoIP-phones to my new Asterisk 13.14.1 on a Banana PI
with Armbian/Debian 9.
First test was to call a test service that say the time. Works!
Second test was to record my voice and play it again. Works!
Third test was to call the other VoIP-phone. It does NOT
Hello,
I am getting the following error when compiling dahdi :
make[2]: Entering directory `/usr/src/kernels/2.6.32-431.1.2.0.1.el6.x86_64'
Building modules, stage 2.
MODPOST 0 modules
make[2]: Leaving directory `/usr/src/kernels/2.6.32-431.1.2.0.1.el6.x86_64'
make -C
On 01/03/2014 03:56 PM, Jonas Kellens wrote:
Hello,
I am getting the following error when compiling dahdi :
[snip]
`/usr/src/dahdi-linux-complete-2.7.0.1+2.7.0.1/linux'
make: *** [all] Error 2
I have the right kernel sources installed :
[root@sip dahdi-linux-complete-2.7.0.1+2.7.0.1]#
Q. Make sure you use stable version of dahdi src
03.01.2014 20:56 пользователь Jonas Kellens jonas.kell...@telenet.be
написал:
Hello,
I am getting the following error when compiling dahdi :
make[2]: Entering directory
`/usr/src/kernels/2.6.32-431.1.2.0.1.el6.x86_64'
Building modules,
On Fri, Jan 03, 2014 at 03:56:30PM +0100, Jonas Kellens wrote:
Hello,
I am getting the following error when compiling dahdi :
make[2]: Entering directory `/usr/src/kernels/2.6.32-431.1.2.0.1.el6.x86_64'
Building modules, stage 2.
MODPOST 0 modules
make[2]: Leaving directory
On Thu, Jun 6, 2013 at 10:12 AM, Matteo matteo.camp...@gmail.com wrote:
On Thu, Jun 6, 2013 at 9:56 AM, Tzafrir Cohen tzafrir.co...@xorcom.comwrote:
On Thu, Jun 06, 2013 at 09:31:39AM +0200, Matteo wrote:
Hi list,
I had a problem with the dahdi XPP driver.
After this error in syslog,
Hi list,
I had a problem with the dahdi XPP driver.
After this error in syslog, the Xorcom disconnect from the server:
Jun 3 15:03:29 kernel: [361010.637858] *NOTICE-xpp_usb: xusb-0
(usb-:00:1d.7-3) [X1047686]: Sluggish USB. Dropping next PCM frame (p**
**ending_writes=5)*
Jun 3 15:03:52
On Thu, Jun 06, 2013 at 09:31:39AM +0200, Matteo wrote:
Hi list,
I had a problem with the dahdi XPP driver.
After this error in syslog, the Xorcom disconnect from the server:
Has it happened once? More then once? Reproducable?
How long has the Astribank been working till then?
On Thu, Jun 6, 2013 at 9:56 AM, Tzafrir Cohen tzafrir.co...@xorcom.comwrote:
On Thu, Jun 06, 2013 at 09:31:39AM +0200, Matteo wrote:
Hi list,
I had a problem with the dahdi XPP driver.
After this error in syslog, the Xorcom disconnect from the server:
Has it happened once? More then
Hi to all,
I use FreePBX version 2.7.0.2 with dahdi. The first problem is with
dahdi: At the system startup i can't find a way to start correctly
Asterisk with Dahdi.
My boot configuration is the following:
/etc/rc.d/after.local
/usr/sbin/rcdahdi start
sleep 15
/usr/local/sbin/amportal
On Wed, Jun 16, 2010 at 10:28:48AM +0200, Claudio Prono wrote:
Hi to all,
I use FreePBX version 2.7.0.2 with dahdi. The first problem is with
dahdi: At the system startup i can't find a way to start correctly
Asterisk with Dahdi.
My boot configuration is the following:
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Mike
Sent: Monday, May 25, 2009 9:27 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Problem running Dahdi
I did run make install, probably 3-4 times before I ended up asking that
question
Of Danny Nicholas
Sent: Tuesday, May 26, 2009 10:04
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Problem running Dahdi
It is my experience that /e/i/dahdi doesn't always work correctly
(opensuse
11.0). For whatever reason, it doesn't do the required
On Mon, May 25, 2009 at 10:27:22AM -0400, Mike wrote:
I did run make install, probably 3-4 times before I ended up asking that
question in the mailing list.
Here is the required output: to the first one, could not find module
dahdi.
To the second, it found dahdi in
Hi,
I've been building a new Asterisk server to replace my previous one, all
using the latest 1.4.x downloads from asterisk.org.
I can't even get to the point where dahdi works. I have libpri, dahdi and
dahdi-tools compiled and installed. I have no hardware on that new server,
but I am
Hi,
I've been building a new Asterisk server to replace my previous one, all
using the latest 1.4.x downloads from asterisk.org.
I can't even get to the point where dahdi works. I have libpri, dahdi and
dahdi-tools compiled and installed. I have no hardware on that new server,
but I am
On 25 May 2009, at 13:14, Mike wrote:
Everything compiles seemingly well, but this is what I get when I
try to start dahdi from the startup scripts (/etc/init.d/dahdi
restart).
Define 'this'
___
-- Bandwidth and Colocation Provided by
-
From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-
boun...@lists.digium.com] On Behalf Of Steve Howes
Sent: Monday, May 25, 2009 9:07
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Problem running Dahdi
On 25 May 2009
On Mon, May 25, 2009 at 09:32:07AM -0400, Mike wrote:
Sorry, it seems to have disappeared from my original email!
FATAL: Module Dahdi not found
[snip] all modules listed as not found [/snip]
Error: missing /dev/dahdi!
Your description makes me suspect you have not run 'make install' in
On Mon, May 25, 2009 at 08:14:44AM -0400, Mike wrote:
Hi,
I've been building a new Asterisk server to replace my previous one, all
using the latest 1.4.x downloads from asterisk.org.
I can't even get to the point where dahdi works. I have libpri, dahdi and
dahdi-tools compiled and
9:53
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] Problem running Dahdi
On Mon, May 25, 2009 at 09:32:07AM -0400, Mike wrote:
Sorry, it seems to have disappeared from my original email!
FATAL: Module Dahdi not found
[snip] all modules listed as not found [/snip
Hi to all.
I'm trying to use meetme on asterisk 1.4.22.1.
On a debian i've compiled (as i need h323 support)
openh323_v1_18_0
pwlib_v1_10_0
dahdi-linux-2.1.0.3
dahdi-tools-2.1.0.2
asterisk-1.4.22.1
All works fine, dahdi status is:
asterik:/data/programmi# /etc/init.d/dahdi status
### Span 1:
PS:
asterisk is compiled with dahdi support
On Mon, Jan 12, 2009 at 1:39 PM, nik600 nik...@gmail.com wrote:
Hi to all.
I'm trying to use meetme on asterisk 1.4.22.1.
On a debian i've compiled (as i need h323 support)
openh323_v1_18_0
pwlib_v1_10_0
dahdi-linux-2.1.0.3
recompile whitout dahdi suport or correct the dahdi files so they show your
real dahdi hardware if you havent any leave them blank.
2009/1/12 nik600 nik...@gmail.com
PS:
asterisk is compiled with dahdi support
On Mon, Jan 12, 2009 at 1:39 PM, nik600 nik...@gmail.com wrote:
Hi to all.
[EMAIL PROTECTED]
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
asterisk-users@lists.digium.com
Date: Sun, 23 Nov 2008 16:39:14 -0700
Thread-Topic: [asterisk-users] Problem with DAHDI and OSLEC integration.
Thread-Index: AclNwtn/mA/EFuLiQUqEGjb+9HhEWQAABJlg
Message-ID
Hi List.
I've bought a new server for my home asterisk installation and I'm
trying to install asterisk with dahdi drivers and OSLEC. To do that I've
got the svn dahdi-linux trunk revision 5366 and the echo subproject from
the 2.6.28-rc6 Linux kernel sources.
As reported in the dadhi README file
Am I doing something wrong?
I just posted this exact issue on Wednesday:
http://lists.digium.com/pipermail/asterisk-users/2008-November/222063.html
I never got any response and Digium came through with keys for my HPEC
license in the nick of time. I am not pleased with the admin overhead
HPEC
On Sun, Nov 23, 2008 at 11:44:04PM +0100, Marco Signorini wrote:
Hi List.
I've bought a new server for my home asterisk installation and I'm
trying to install asterisk with dahdi drivers and OSLEC. To do that I've
got the svn dahdi-linux trunk revision 5366 and the echo subproject from
the
Have you copied there the files from the directory drivers/staging/echo
in a recent (that is: = 2.6.28-rc1) kernel tree?
Tzafrir,
Thank you for following up on this. I don't have a quick command for only
the three files, I just grabbed the tar ball. But like the OP, the only
difference was that
34 matches
Mail list logo